Add new bindings:
 - mrvl,xspi-nor compatible string
   Compatible string to enable Marvell XSPI modification
 - Multiple PHY configuration registers
 - base for xfer register set

Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
---
 .../devicetree/bindings/spi/cdns,xspi.yaml    | 84 ++++++++++++++++++-
 1 file changed, 83 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index eb0f92468185..d1fde8d4e9b8 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -20,23 +20,74 @@ allOf:
 
 properties:
   compatible:
-    const: cdns,xspi-nor
+    - const: cdns,xspi-nor
+    - const: mrvl,xspi-nor
 
   reg:
     items:
       - description: address and length of the controller register set
       - description: address and length of the Slave DMA data port
       - description: address and length of the auxiliary registers
+      - description: address and length of the xfer registers
 
   reg-names:
     items:
       - const: io
       - const: sdma
       - const: aux
+      - const: xferbase
 
   interrupts:
     maxItems: 1
 
+  cdns,dll-phy-control:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x707
+
+  cdns,rfile-phy-control:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x40000
+
+  cdns,rfile-phy-tsel:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  cdns,phy-dq-timing:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x101
+
+  cdns,phy-dqs-timing:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x700404
+
+  cdns,phy-gate-lpbk-ctrl:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x200030
+
+  cdns,phy-dll-master-ctrl:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x00800000
+
+  cdns,phy-dll-slave-ctrl:
+    description: |
+      PHY config register. Valid only for cdns,mrvl-xspi-nor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x0000ff01
+
 required:
   - compatible
   - reg
@@ -68,6 +119,37 @@ examples:
                 reg = <0>;
             };
 
+            flash@1 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <1>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xspi: spi@a0010000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "mrvl,xspi-nor";
+            reg = <0x0 0xa0010000 0x0 0x1040>,
+                  <0x0 0xb0000000 0x0 0x1000>,
+                  <0x0 0xa0020000 0x0 0x100>;
+                  <0x0 0xa0090000 0x0 0x100>;
+            reg-names = "io", "sdma", "aux", "xferbase";
+            interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-parent = <&gic>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <0>;
+            };
+
             flash@1 {
                 compatible = "jedec,spi-nor";
                 spi-max-frequency = <75000000>;
-- 
2.17.1

Hi Witold,

kernel test robot noticed the following build warnings:

[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on linus/master v6.9-rc1 next-20240328]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Witold-Sadowski/spi-cadence-Add-new-bindings-documentation-for-Cadence-XSPI/20240330-035124
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link:    https://lore.kernel.org/r/20240329194849.25554-2-wsadowski%40marvell.com
patch subject: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI
compiler: loongarch64-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20240331/202403311827.DCvAFLcu-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202403311827.DCvAFLcu-lkp@intel.com/

dtcheck warnings: (new ones prefixed by >>)
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
   	from schema $id: http://json-schema.org/draft-07/schema#
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
   	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
--
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible
   Documentation/devicetree/bindings/net/snps,dwmac.yaml: mac-mode: missing type definition

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

On 29/03/2024 20:48, Witold Sadowski wrote:
> Add new bindings:
>  - mrvl,xspi-nor compatible string
>    Compatible string to enable Marvell XSPI modification
>  - Multiple PHY configuration registers
>  - base for xfer register set
> 
> Signed-off-by: Witold Sadowski <wsadowski@marvell.com>

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.


> ---
>  .../devicetree/bindings/spi/cdns,xspi.yaml    | 84 ++++++++++++++++++-
>  1 file changed, 83 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> index eb0f92468185..d1fde8d4e9b8 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> @@ -20,23 +20,74 @@ allOf:
>  
>  properties:
>    compatible:
> -    const: cdns,xspi-nor
> +    - const: cdns,xspi-nor
> +    - const: mrvl,xspi-nor

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

There is a lot of things happening here, but I won't perform review if
the code was never tested. Sorry, please test before sending.

Best regards,
Krzysztof

On Fri, 29 Mar 2024 12:48:45 -0700, Witold Sadowski wrote:
> Add new bindings:
>  - mrvl,xspi-nor compatible string
>    Compatible string to enable Marvell XSPI modification
>  - Multiple PHY configuration registers
>  - base for xfer register set
> 
> Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
> ---
>  .../devicetree/bindings/spi/cdns,xspi.yaml    | 84 ++++++++++++++++++-
>  1 file changed, 83 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible
Error: Documentation/devicetree/bindings/spi/cdns,xspi.example.dts:88.23-24 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/spi/cdns,xspi.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240329194849.25554-2-wsadowski@marvell.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.