1. Patchew
  2. linux
  3. [PATCH v6 0/3] Add support for Loongson-1 NAND
  4. View patch

[PATCH v6 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller

Keguang Zhang via B4 Relay posted 3 patches 1 year, 10 months ago
There is a newer version of this series
[PATCH v6 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller
Posted by Keguang Zhang via B4 Relay 1 year, 10 months ago 
From: Keguang Zhang <keguang.zhang@gmail.com>

Add devicetree binding document for Loongson-1 NAND Controller.

Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
Changes in v6:
- A newly added patch
---
 .../devicetree/bindings/mtd/loongson,ls1x-nfc.yaml | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
new file mode 100644
index 000000000000..2494c7b3b506
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/loongson,ls1x-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 NAND Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls1b-nfc
+      - items:
+          - enum:
+              - loongson,ls1a-nfc
+              - loongson,ls1c-nfc
+          - const: loongson,ls1b-nfc
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rxtx
+
+patternProperties:
+  "^nand@[0-3]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@1fe78000 {
+        compatible = "loongson,ls1b-nfc";
+        reg = <0x1fe78000 0x40>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dmas = <&dma 0>;
+        dma-names = "rxtx";
+
+        nand@0 {
+            reg = <0>;
+            nand-use-soft-ecc-engine;
+            nand-ecc-algo = "hamming";
+        };
+    };

-- 
2.40.1
Re: [PATCH v6 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller
Posted by Conor Dooley 1 year, 10 months ago 
On Wed, Mar 27, 2024 at 06:43:59PM +0800, Keguang Zhang via B4 Relay wrote:
> From: Keguang Zhang <keguang.zhang@gmail.com>
> 
> Add devicetree binding document for Loongson-1 NAND Controller.
> 
> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> ---
> Changes in v6:
> - A newly added patch
> ---
>  .../devicetree/bindings/mtd/loongson,ls1x-nfc.yaml | 66 ++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> new file mode 100644
> index 000000000000..2494c7b3b506
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/loongson,ls1x-nfc.yaml#

Please make the filename match the compatible.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1 NAND Controller
> +
> +maintainers:
> +  - Keguang Zhang <keguang.zhang@gmail.com>
> +
> +allOf:
> +  - $ref: nand-controller.yaml
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: loongson,ls1b-nfc
> +      - items:
> +          - enum:
> +              - loongson,ls1a-nfc
> +              - loongson,ls1c-nfc
> +          - const: loongson,ls1b-nfc
> +
> +  reg:
> +    maxItems: 1
> +
> +  dmas:
> +    maxItems: 1
> +
> +  dma-names:
> +    const: rxtx

If you only have one dma, why do you need a dma-names entry for it?

Looks fine to me otherwise though,
COnor.

> +
> +patternProperties:
> +  "^nand@[0-3]$":
> +    type: object
> +    $ref: raw-nand-chip.yaml
> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - dmas
> +  - dma-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    nand-controller@1fe78000 {
> +        compatible = "loongson,ls1b-nfc";
> +        reg = <0x1fe78000 0x40>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        dmas = <&dma 0>;
> +        dma-names = "rxtx";
> +
> +        nand@0 {
> +            reg = <0>;
> +            nand-use-soft-ecc-engine;
> +            nand-ecc-algo = "hamming";
> +        };
> +    };
> 
> -- 
> 2.40.1
> 
>
Re: [PATCH v6 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller
Posted by Keguang Zhang 1 year, 10 months ago 
On Thu, Mar 28, 2024 at 12:23 AM Conor Dooley <conor@kernel.org> wrote:
>
> On Wed, Mar 27, 2024 at 06:43:59PM +0800, Keguang Zhang via B4 Relay wrote:
> > From: Keguang Zhang <keguang.zhang@gmail.com>
> >
> > Add devicetree binding document for Loongson-1 NAND Controller.
> >
> > Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> > ---
> > Changes in v6:
> > - A newly added patch
> > ---
> >  .../devicetree/bindings/mtd/loongson,ls1x-nfc.yaml | 66 ++++++++++++++++++++++
> >  1 file changed, 66 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> > new file mode 100644
> > index 000000000000..2494c7b3b506
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> > @@ -0,0 +1,66 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/loongson,ls1x-nfc.yaml#
>
> Please make the filename match the compatible.
>
Got it. I'll rename it to loongson,ls1-nfc.yaml and change the
compatible as follows.
  compatible:
   items:
     - enum:
         - loongson,ls1a-nfc
         - loongson,ls1b-nfc
         - loongson,ls1c-nfc
     - const: loongson,ls1-nfc

> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Loongson-1 NAND Controller
> > +
> > +maintainers:
> > +  - Keguang Zhang <keguang.zhang@gmail.com>
> > +
> > +allOf:
> > +  - $ref: nand-controller.yaml
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: loongson,ls1b-nfc
> > +      - items:
> > +          - enum:
> > +              - loongson,ls1a-nfc
> > +              - loongson,ls1c-nfc
> > +          - const: loongson,ls1b-nfc
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    maxItems: 1
> > +
> > +  dma-names:
> > +    const: rxtx
>
> If you only have one dma, why do you need a dma-names entry for it?
>
Without "dma-names", the following error will come out when doing
dt_binding_check.
  nand-controller@1fe78000: 'dma-names' is a required property

In addition, loongson1_nand.c calls dma_request_chan(). Then
dma_request_chan() calls of_dma_request_slave_channel(), in which the
'dma-names' is necessary.
struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
                                             const char *name)
{
       ...
       count = of_property_count_strings(np, "dma-names");
       if (count < 0) {
               pr_err("%s: dma-names property of node '%pOF' missing
or empty\n",
                       __func__, np);
               return ERR_PTR(-ENODEV);
       }
       ...
}

Thanks for your review!

> Looks fine to me otherwise though,
> COnor.
>
> > +
> > +patternProperties:
> > +  "^nand@[0-3]$":
> > +    type: object
> > +    $ref: raw-nand-chip.yaml
> > +
> > +    unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - dmas
> > +  - dma-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    nand-controller@1fe78000 {
> > +        compatible = "loongson,ls1b-nfc";
> > +        reg = <0x1fe78000 0x40>;
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        dmas = <&dma 0>;
> > +        dma-names = "rxtx";
> > +
> > +        nand@0 {
> > +            reg = <0>;
> > +            nand-use-soft-ecc-engine;
> > +            nand-ecc-algo = "hamming";
> > +        };
> > +    };
> >
> > --
> > 2.40.1
> >
> >



--
Best regards,

Keguang Zhang
Re: [PATCH v6 1/3] dt-bindings: mtd: Add Loongson-1 NAND Controller
Posted by Conor Dooley 1 year, 10 months ago 
On Thu, Mar 28, 2024 at 04:54:59PM +0800, Keguang Zhang wrote:
> On Thu, Mar 28, 2024 at 12:23 AM Conor Dooley <conor@kernel.org> wrote:
> >
> > On Wed, Mar 27, 2024 at 06:43:59PM +0800, Keguang Zhang via B4 Relay wrote:
> > > From: Keguang Zhang <keguang.zhang@gmail.com>
> > >
> > > Add devicetree binding document for Loongson-1 NAND Controller.
> > >
> > > Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> > > ---
> > > Changes in v6:
> > > - A newly added patch
> > > ---
> > >  .../devicetree/bindings/mtd/loongson,ls1x-nfc.yaml | 66 ++++++++++++++++++++++
> > >  1 file changed, 66 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> > > new file mode 100644
> > > index 000000000000..2494c7b3b506
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1x-nfc.yaml
> > > @@ -0,0 +1,66 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mtd/loongson,ls1x-nfc.yaml#
> >
> > Please make the filename match the compatible.
> >
> Got it. I'll rename it to loongson,ls1-nfc.yaml and change the
> compatible as follows.
>   compatible:
>    items:
>      - enum:
>          - loongson,ls1a-nfc
>          - loongson,ls1b-nfc
>          - loongson,ls1c-nfc
>      - const: loongson,ls1-nfc

No, please do not do this. Just call the file "ls1b-nfc".

Thanks,
Conor.

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.