Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-uniphier.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 854ac25b5862..24fa15c92845 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -17,13 +17,13 @@
 #define     UNIPHIER_I2C_DTRM_NACK	BIT(8)	/* do not return ACK */
 #define     UNIPHIER_I2C_DTRM_RD	BIT(0)	/* read transaction */
 #define UNIPHIER_I2C_DREC	0x04	/* RX register */
-#define     UNIPHIER_I2C_DREC_MST	BIT(14)	/* 1 = master, 0 = slave */
+#define     UNIPHIER_I2C_DREC_MST	BIT(14)	/* 1 = host, 0 = target */
 #define     UNIPHIER_I2C_DREC_TX	BIT(13)	/* 1 = transmit, 0 = receive */
 #define     UNIPHIER_I2C_DREC_STS	BIT(12)	/* stop condition detected */
 #define     UNIPHIER_I2C_DREC_LRB	BIT(11)	/* no ACK */
 #define     UNIPHIER_I2C_DREC_LAB	BIT(9)	/* arbitration lost */
 #define     UNIPHIER_I2C_DREC_BBN	BIT(8)	/* bus not busy */
-#define UNIPHIER_I2C_MYAD	0x08	/* slave address */
+#define UNIPHIER_I2C_MYAD	0x08	/* target address */
 #define UNIPHIER_I2C_CLK	0x0c	/* clock frequency control */
 #define UNIPHIER_I2C_BRST	0x10	/* bus reset */
 #define     UNIPHIER_I2C_BRST_FOEN	BIT(1)	/* normal operation */
@@ -154,7 +154,7 @@ static int uniphier_i2c_stop(struct i2c_adapter *adap)
 				      UNIPHIER_I2C_DTRM_NACK);
 }
 
-static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap,
+static int uniphier_i2c_xfer_one(struct i2c_adapter *adap,
 					struct i2c_msg *msg, bool stop)
 {
 	bool is_read = msg->flags & I2C_M_RD;
@@ -213,7 +213,7 @@ static int uniphier_i2c_check_bus_busy(struct i2c_adapter *adap)
 	return 0;
 }
 
-static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
+static int uniphier_i2c_xfer(struct i2c_adapter *adap,
 				    struct i2c_msg *msgs, int num)
 {
 	struct i2c_msg *msg, *emsg = msgs + num;
@@ -227,7 +227,7 @@ static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
 		/* Emit STOP if it is the last message or I2C_M_STOP is set. */
 		bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
 
-		ret = uniphier_i2c_master_xfer_one(adap, msg, stop);
+		ret = uniphier_i2c_xfer_one(adap, msg, stop);
 		if (ret)
 			return ret;
 	}
@@ -241,7 +241,7 @@ static u32 uniphier_i2c_functionality(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm uniphier_i2c_algo = {
-	.master_xfer = uniphier_i2c_master_xfer,
+	.xfer = uniphier_i2c_xfer,
 	.functionality = uniphier_i2c_functionality,
 };
 
-- 
2.43.0