Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-sh_mobile.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index c65ac3d7eadc..276a036d8ef0 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -53,7 +53,7 @@
/* */
/* Receive operation: */
/* */
-/* 0 byte receive - not supported since slave may hold SDA low */
+/* 0 byte receive - not supported since client may hold SDA low */
/* */
/* 1 byte receive [TX] | [RX] */
/* BUS: S A8 ACK | D8(1) ACK P(*) */
@@ -93,7 +93,7 @@
/* _______________________________________________ */
/* BUSY __/ \_ */
/* */
-/* (*) The STOP condition is only sent by the master at the end of the last */
+/* (*) The STOP condition is only sent by the host at the end of the last */
/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
/* only cleared after the STOP condition, so, between messages we have to */
/* poll for the DTE bit. */
@@ -495,7 +495,7 @@ static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
ret = dmaengine_slave_config(chan, &cfg);
if (ret) {
- dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
+ dev_dbg(dev, "DMA config failed for %s (%d)\n", chan_name, ret);
dma_release_channel(chan);
return ERR_PTR(ret);
}
@@ -540,7 +540,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc) {
- dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n");
+ dev_dbg(pd->dev, "dma prep sg failed, using PIO\n");
sh_mobile_i2c_cleanup_dma(pd, false);
return;
}
@@ -740,8 +740,8 @@ static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
.functionality = sh_mobile_i2c_func,
- .master_xfer = sh_mobile_i2c_xfer,
- .master_xfer_atomic = sh_mobile_i2c_xfer_atomic,
+ .xfer = sh_mobile_i2c_xfer,
+ .xfer_atomic = sh_mobile_i2c_xfer_atomic,
};
static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = {
--
2.43.0