Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-eg20t.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 4914bfbee2a9..e95793036f5d 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -337,7 +337,7 @@ static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
 	adap->pch_event_flag = 0;
 
 	if (ioread32(p + PCH_I2CSR) & PCH_GETACK) {
-		pch_dbg(adap, "Receive NACK for slave address setting\n");
+		pch_dbg(adap, "Receive NACK for client address setting\n");
 		return -ENXIO;
 	}
 
@@ -382,7 +382,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 	buf = msgs->buf;
 	addr = msgs->addr;
 
-	/* enable master tx */
+	/* enable host tx */
 	pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 
 	pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL),
@@ -406,7 +406,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 		addr_8_lsb = (addr & I2C_ADDR_MSK);
 		iowrite32(addr_8_lsb, p + PCH_I2CDR);
 	} else {
-		/* set 7 bit slave address and R/W bit as 0 */
+		/* set 7 bit client address and R/W bit as 0 */
 		iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR);
 		if (first)
 			pch_i2c_start(adap);
@@ -500,7 +500,7 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 	buf = msgs->buf;
 	addr = msgs->addr;
 
-	/* enable master reception */
+	/* enable host reception */
 	pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 
 	if (first) {
@@ -708,7 +708,7 @@ static u32 pch_i2c_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm pch_algorithm = {
-	.master_xfer = pch_i2c_xfer,
+	.xfer = pch_i2c_xfer,
 	.functionality = pch_i2c_func
 };
 
-- 
2.43.0

Hi Wolfram,

On Fri, Mar 22, 2024 at 02:25:11PM +0100, Wolfram Sang wrote:
> Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
> specifications and replace "master/slave" with more appropriate terms.
> They are also more specific because we distinguish now between a remote
> entity ("client") and a local one ("target").
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  drivers/i2c/busses/i2c-eg20t.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
> index 4914bfbee2a9..e95793036f5d 100644
> --- a/drivers/i2c/busses/i2c-eg20t.c
> +++ b/drivers/i2c/busses/i2c-eg20t.c
> @@ -337,7 +337,7 @@ static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
>  	adap->pch_event_flag = 0;
>  
>  	if (ioread32(p + PCH_I2CSR) & PCH_GETACK) {
> -		pch_dbg(adap, "Receive NACK for slave address setting\n");
> +		pch_dbg(adap, "Receive NACK for client address setting\n");
>  		return -ENXIO;
>  	}
>  
> @@ -382,7 +382,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
>  	buf = msgs->buf;
>  	addr = msgs->addr;
>  
> -	/* enable master tx */
> +	/* enable host tx */

maybe we should also specify that we are using both host and
client for master in the commit message.

In any case,

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

Thanks,
Andi