Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 3bf7cf5d1700..91a046b3529c 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -45,6 +45,12 @@ pmic@PM7250B_SID {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm7250b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		pm7250b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;

-- 
2.44.0

On 22.03.2024 09:01, Luca Weiss wrote:
> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM7250B. This will provide the VBUS source to connected
> peripherals.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 3bf7cf5d1700..91a046b3529c 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -45,6 +45,12 @@ pmic@PM7250B_SID {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pm7250b_vbus: usb-vbus-regulator@1100 {
> +			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
> +			status = "disabled";
> +			reg = <0x1100>;

Could you fix the ordering here?

Konrad

On 22/03/2024 08:01, Luca Weiss wrote:
> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM7250B. This will provide the VBUS source to connected
> peripherals.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>   arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 3bf7cf5d1700..91a046b3529c 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -45,6 +45,12 @@ pmic@PM7250B_SID {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
>   
> +		pm7250b_vbus: usb-vbus-regulator@1100 {
> +			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
> +			status = "disabled";
> +			reg = <0x1100>;
> +		};
> +
>   		pm7250b_temp: temp-alarm@2400 {
>   			compatible = "qcom,spmi-temp-alarm";
>   			reg = <0x2400>;
> 

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>