Hello!

This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.

Also, while implementing CQE support for the driver, I faced with a problem
which I will describe below.
According to the IP block documentation CQE works only with "AMDA-2 only"
mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
platform data.

So my question is: is it correct to enable v4 mode for all platform data
if 'SDHCI_CAN_64BIT_V4' bit is set in hw?

Because I`m afraid that enabling v4 mode for some platforms could break
them down. On the other hand, if host controller says that it can do v4
(caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
quirk. Anyway - RFC.


v2:
 - Added dwcmshc specific cqe_disable hook to prevent losing
   in-flight cmd when an ioctl is issued and cqe_disable is called;

 - Added processing 128Mb boundary for the host memory data buffer size
   and the data buffer. For implementing this processing an extra
   callback is added to the struct 'sdhci_ops'.

 - Fixed typo.

v3:
 - Fix warning reported by kernel test robot:
        | Reported-by: kernel test robot <lkp@intel.com>
        | Closes: https://lore.kernel.org/oe-kbuild-all/202309270807.VoVn81m6-lkp@intel.com/
        | Closes: https://lore.kernel.org/oe-kbuild-all/202309300806.dcR19kcE-lkp@intel.com/

v4:
 - Data reset moved to custom driver tuning hook.
 - Removed unnecessary dwcmshc_sdhci_cqe_disable() func
 - Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
   cqhci_set_tran_desc() instead.
 - Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
 - Fix typo: int_clok_disable --> int_clock_disable

v5:
 - Fix warning reported by kernel test robot:
	| Reported-by: kernel test robot <lkp@intel.com>
	| Closes: https://lore.kernel.org/oe-kbuild-all/202312301130.itEZhhI5-lkp@intel.com/

v6:
 - Rebase to master branch
 - Fix typo;
 - Fix double blank line;
 - Add cqhci_suspend() and cqhci_resume() functions
   to support mmc suspend-to-ram (s2r);
 - Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
   condition as not all IPs have that register;
 - Remove sdhci V4 mode from the list of prerequisites to init cqhci.

v7:
 - Add disabling MMC_CAP2_CQE and MMC_CAP2_CQE_DCMD caps
   in case of CQE init fails to prevent problems in suspend/resume
   functions.

Sergey Khimich (2):
  mmc: cqhci: Add cqhci set_tran_desc() callback
  mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support

 drivers/mmc/host/Kconfig            |   1 +
 drivers/mmc/host/cqhci-core.c       |  11 +-
 drivers/mmc/host/cqhci.h            |   4 +
 drivers/mmc/host/sdhci-of-dwcmshc.c | 191 +++++++++++++++++++++++++++-
 4 files changed, 202 insertions(+), 5 deletions(-)

-- 
2.30.2

On Tue, 19 Mar 2024 at 12:59, Sergey Khimich <serghox@gmail.com> wrote:
>
> Hello!
>
> This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
> For enabling CQE support just set 'supports-cqe' in your DevTree file
> for appropriate mmc node.
>
> Also, while implementing CQE support for the driver, I faced with a problem
> which I will describe below.
> According to the IP block documentation CQE works only with "AMDA-2 only"
> mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
> function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
> platform data.
>
> So my question is: is it correct to enable v4 mode for all platform data
> if 'SDHCI_CAN_64BIT_V4' bit is set in hw?
>
> Because I`m afraid that enabling v4 mode for some platforms could break
> them down. On the other hand, if host controller says that it can do v4
> (caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
> quirk. Anyway - RFC.
>
>
> v2:
>  - Added dwcmshc specific cqe_disable hook to prevent losing
>    in-flight cmd when an ioctl is issued and cqe_disable is called;
>
>  - Added processing 128Mb boundary for the host memory data buffer size
>    and the data buffer. For implementing this processing an extra
>    callback is added to the struct 'sdhci_ops'.
>
>  - Fixed typo.
>
> v3:
>  - Fix warning reported by kernel test robot:
>         | Reported-by: kernel test robot <lkp@intel.com>
>         | Closes: https://lore.kernel.org/oe-kbuild-all/202309270807.VoVn81m6-lkp@intel.com/
>         | Closes: https://lore.kernel.org/oe-kbuild-all/202309300806.dcR19kcE-lkp@intel.com/
>
> v4:
>  - Data reset moved to custom driver tuning hook.
>  - Removed unnecessary dwcmshc_sdhci_cqe_disable() func
>  - Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
>    cqhci_set_tran_desc() instead.
>  - Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
>  - Fix typo: int_clok_disable --> int_clock_disable
>
> v5:
>  - Fix warning reported by kernel test robot:
>         | Reported-by: kernel test robot <lkp@intel.com>
>         | Closes: https://lore.kernel.org/oe-kbuild-all/202312301130.itEZhhI5-lkp@intel.com/
>
> v6:
>  - Rebase to master branch
>  - Fix typo;
>  - Fix double blank line;
>  - Add cqhci_suspend() and cqhci_resume() functions
>    to support mmc suspend-to-ram (s2r);
>  - Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
>    condition as not all IPs have that register;
>  - Remove sdhci V4 mode from the list of prerequisites to init cqhci.
>
> v7:
>  - Add disabling MMC_CAP2_CQE and MMC_CAP2_CQE_DCMD caps
>    in case of CQE init fails to prevent problems in suspend/resume
>    functions.
>
> Sergey Khimich (2):
>   mmc: cqhci: Add cqhci set_tran_desc() callback
>   mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support
>
>  drivers/mmc/host/Kconfig            |   1 +
>  drivers/mmc/host/cqhci-core.c       |  11 +-
>  drivers/mmc/host/cqhci.h            |   4 +
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 191 +++++++++++++++++++++++++++-
>  4 files changed, 202 insertions(+), 5 deletions(-)
>

Applied for next and by fixing a minor conflict when applying, thanks!

Kind regards
Uffe