From: Yang Xiwen <forbidden405@outlook.com>
The user documented(Hi3516) is not found in current kernel anymore. And
it seems this SoC has been EOL for a long time. While at it, Remove this
binding entirely due to recent driver changes.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
---
.../devicetree/bindings/net/hisilicon-femac.txt | 41 ----------------------
1 file changed, 41 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt
deleted file mode 100644
index 5f96976f3cea..000000000000
--- a/Documentation/devicetree/bindings/net/hisilicon-femac.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Hisilicon Fast Ethernet MAC controller
-
-Required properties:
-- compatible: should contain one of the following version strings:
- * "hisilicon,hisi-femac-v1"
- * "hisilicon,hisi-femac-v2"
- and the soc string "hisilicon,hi3516cv300-femac".
-- reg: specifies base physical address(s) and size of the device registers.
- The first region is the MAC core register base and size.
- The second region is the global MAC control register.
-- interrupts: should contain the MAC interrupt.
-- clocks: A phandle to the MAC main clock.
-- resets: should contain the phandle to the MAC reset signal(required) and
- the PHY reset signal(optional).
-- reset-names: should contain the reset signal name "mac"(required)
- and "phy"(optional).
-- phy-mode: see ethernet.txt [1].
-- phy-handle: see ethernet.txt [1].
-- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
- The 1st cell is reset pre-delay in micro seconds.
- The 2nd cell is reset pulse in micro seconds.
- The 3rd cell is reset post-delay in micro seconds.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt[1].
-
-[1] Documentation/devicetree/bindings/net/ethernet.txt
-
-Example:
- hisi_femac: ethernet@10090000 {
- compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2";
- reg = <0x10090000 0x1000>,<0x10091300 0x200>;
- interrupts = <12>;
- clocks = <&crg HI3518EV200_ETH_CLK>;
- resets = <&crg 0xec 0>,<&crg 0xec 3>;
- reset-names = "mac","phy";
- mac-address = [00 00 00 00 00 00];
- phy-mode = "mii";
- phy-handle = <&phy0>;
- hisilicon,phy-reset-delays-us = <10000 20000 20000>;
- };
--
2.43.0