The actual size of the channels registers region is 4MB, according to the
documentation. This issue was not caught until now because the driver was
supposed to allow same regions being mapped multiple times for supporting
multiple buses. Thie driver is using platform_get_resource_byname() and
devm_ioremap() towards that purpose, which intentionally avoids
devm_request_mem_region() altogether.

Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index d488b3b3265e..260eda81b743 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3747,7 +3747,7 @@ sram@c3f0000 {
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;

-- 
2.34.1

On 21/02/2024 14:04, Abel Vesa wrote:
> The actual size of the channels registers region is 4MB, according to the
> documentation. This issue was not caught until now because the driver was
> supposed to allow same regions being mapped multiple times for supporting
> multiple buses. Thie driver is using platform_get_resource_byname() and
> devm_ioremap() towards that purpose, which intentionally avoids
> devm_request_mem_region() altogether.
> 
> Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index d488b3b3265e..260eda81b743 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -3747,7 +3747,7 @@ sram@c3f0000 {
>   		spmi_bus: spmi@c400000 {
>   			compatible = "qcom,spmi-pmic-arb";
>   			reg = <0 0x0c400000 0 0x3000>,
> -			      <0 0x0c500000 0 0x4000000>,
> +			      <0 0x0c500000 0 0x400000>,
>   			      <0 0x0c440000 0 0x80000>,
>   			      <0 0x0c4c0000 0 0x20000>,
>   			      <0 0x0c42d000 0 0x4000>;
> 

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD

On 21.02.2024 14:04, Abel Vesa wrote:
> The actual size of the channels registers region is 4MB, according to the
> documentation. This issue was not caught until now because the driver was
> supposed to allow same regions being mapped multiple times for supporting
> multiple buses. Thie driver is using platform_get_resource_byname() and
> devm_ioremap() towards that purpose, which intentionally avoids
> devm_request_mem_region() altogether.
> 
> Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad