mv88q2xxx_config_init calls genphy_c45_read_pma which is done by
mv88q2xxx_read_status, it calls also mv88q2xxx_config_aneg which is
also called by the PHY state machine. Let the PHY state machine handle
the phydriver ops in their intendend way.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
---
drivers/net/phy/marvell-88q2xxx.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 58140dfd75cb..64b96ca83a0f 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -369,20 +369,13 @@ static int mv88q2xxx_config_aneg(struct phy_device *phydev)
static int mv88q2xxx_config_init(struct phy_device *phydev)
{
- int ret;
-
/* The 88Q2XXX PHYs do have the extended ability register available, but
* register MDIO_PMA_EXTABLE where they should signalize it does not
* work according to specification. Therefore, we force it here.
*/
phydev->pma_extable = MDIO_PMA_EXTABLE_BT1;
- /* Read the current PHY configuration */
- ret = genphy_c45_read_pma(phydev);
- if (ret)
- return ret;
-
- return mv88q2xxx_config_aneg(phydev);
+ return 0;
}
static int mv88q2xxx_get_sqi(struct phy_device *phydev)
--
2.39.2