.../devicetree/bindings/ata/ahci-mtk.txt | 51 ---------- .../bindings/ata/mediatek,mtk-ahci.yaml | 98 +++++++++++++++++++ 2 files changed, 98 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt create mode 100644 Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
From: Rafał Miłecki <rafal@milecki.pl>
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../devicetree/bindings/ata/ahci-mtk.txt | 51 ----------
.../bindings/ata/mediatek,mtk-ahci.yaml | 98 +++++++++++++++++++
2 files changed, 98 insertions(+), 51 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
create mode 100644 Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696b161b..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
- When using "mediatek,mtk-ahci" compatible strings, you
- need SoC specific ones in addition, one of:
- - "mediatek,mt7622-ahci"
- - reg : Physical base addresses and length of register sets.
- - interrupts : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks : A list of phandle and clock specifier pairs, one for each
- entry in clock-names.
- - clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys : A phandle and PHY specifier pair for the PHY port.
- - phy-names : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains : A phandle and power domain specifier pair to the power
- domain which is responsible for collapsing and restoring
- power to the peripheral.
- - resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
- - reset-names : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
- SATA function.
-
-Example:
-
- sata: sata@1a200000 {
- compatible = "mediatek,mt7622-ahci",
- "mediatek,mtk-ahci";
- reg = <0 0x1a200000 0 0x1100>;
- interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hostc";
- clocks = <&pciesys CLK_SATA_AHB_EN>,
- <&pciesys CLK_SATA_AXI_EN>,
- <&pciesys CLK_SATA_ASIC_EN>,
- <&pciesys CLK_SATA_RBC_EN>,
- <&pciesys CLK_SATA_PM_EN>;
- clock-names = "ahb", "axi", "asic", "rbc", "pm";
- phys = <&u3port1 PHY_TYPE_SATA>;
- phy-names = "sata-phy";
- ports-implemented = <0x1>;
- power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
- resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
- <&pciesys MT7622_SATA_PHY_SW_RST>,
- <&pciesys MT7622_SATA_PHY_REG_RST>;
- reset-names = "axi", "sw", "reg";
- mediatek,phy-mode = <&pciesys>;
- };
diff --git a/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
new file mode 100644
index 000000000000..a34bd2e9c352
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Serial ATA controller
+
+maintainers:
+ - Ryder Lee <ryder.lee@mediatek.com>
+
+allOf:
+ - $ref: ahci-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt7622-ahci
+ - const: mediatek,mtk-ahci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: hostc
+
+ clocks:
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: axi
+ - const: asic
+ - const: rbc
+ - const: pm
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 3
+
+ reset-names:
+ items:
+ - const: axi
+ - const: sw
+ - const: reg
+
+ mediatek,phy-mode:
+ description: System controller phandle, used to enable SATA function
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt7622-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mt7622-power.h>
+ #include <dt-bindings/reset/mt7622-reset.h>
+
+ sata@1a200000 {
+ compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci";
+ reg = <0x1a200000 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&u3port1 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ };
--
2.35.3
On Tue, Feb 13, 2024 at 08:47:47AM +0100, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../devicetree/bindings/ata/ahci-mtk.txt | 51 ---------- > .../bindings/ata/mediatek,mtk-ahci.yaml | 98 +++++++++++++++++++ > 2 files changed, 98 insertions(+), 51 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt > create mode 100644 Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml > Applied: https://git.kernel.org/pub/scm/linux/kernel/git/libata/linux.git/log/?h=for-6.9
Il 13/02/24 08:47, Rafał Miłecki ha scritto: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Tue, Feb 13, 2024 at 08:47:47AM +0100, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Hello Rob, For device tree patches for Documentation/devicetree/bindings/ata/ Usually, if we see your Acked-by, we queue the patch via the libata tree. (If it is part of a series, usually you take it via your tree.) We have a R-b from Krzysztof, but no Ack from you. Kind regards, Niklas
On 19/02/2024 09:39, Niklas Cassel wrote: > On Tue, Feb 13, 2024 at 08:47:47AM +0100, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> This helps validating DTS files. >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> --- > > Hello Rob, > > For device tree patches for > Documentation/devicetree/bindings/ata/ > > Usually, if we see your Acked-by, we queue the patch via the libata tree. > (If it is part of a series, usually you take it via your tree.) > > We have a R-b from Krzysztof, but no Ack from you. You don't need Ack from Rob. Rb or Ack from one of three DT maintainers is enough. Therefore mine is enough. https://www.kernel.org/doc/html/latest/process/maintainers.html#open-firmware-and-flattened-device-tree-bindings Best regards, Krzysztof
On 13/02/2024 08:47, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../devicetree/bindings/ata/ahci-mtk.txt | 51 ---------- > .../bindings/ata/mediatek,mtk-ahci.yaml | 98 +++++++++++++++++++ > 2 files changed, 98 insertions(+), 51 deletions(-) Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.