Move bus-width property to *main.dtsi, above the OTAP/ITAP
delay values. While there is no error with where it is
currently at, it is easier to read the MMC node if the
bus-width property is located above the OTAP/ITAP delay
values consistently across MMC nodes.
Add missing bus-width for MMC2 in k3-am62-main.
Signed-off-by: Judith Mendez <jm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 --
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
6 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 410b390ce5d5..55420eb1c620 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -559,9 +559,9 @@ sdhci0: mmc@fa10000 {
clock-names = "clk_ahb", "clk_xin";
assigned-clocks = <&k3_clks 57 6>;
assigned-clock-parents = <&k3_clks 57 8>;
+ bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
@@ -579,6 +579,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -591,7 +592,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- bus-width = <4>;
status = "disabled";
};
@@ -602,6 +602,7 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index bb6a5837bcb3..a34e0df2ab86 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -842,7 +842,6 @@ &sdhci2 {
vmmc-supply = <&wlan_en>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
- bus-width = <4>;
non-removable;
ti,fails-without-test-cd;
cap-power-off-card;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index ddb76cd66f88..253c1857eedf 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,6 +561,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -573,7 +574,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- bus-width = <4>;
no-1-8-v;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index bea05be7cb48..bc9c9ff993e6 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -626,6 +626,7 @@ sdhci0: mmc@fa10000 {
power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
ti,clkbuf-sel = <0x7>;
@@ -647,6 +648,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
+ bus-width = <4>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index f308076d608a..83f2b00726b5 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -494,7 +494,6 @@ eeprom@0 {
/* eMMC */
&sdhci0 {
status = "okay";
- bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
disable-wp;
@@ -506,7 +505,6 @@ &sdhci1 {
status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
- bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index b286eaa02ada..67cd41bf806e 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -469,7 +469,6 @@ &sdhci1 {
status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
- bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
};
--
2.43.0
Hi Judith, Am 13.02.24 um 01:24 schrieb Judith Mendez: > Move bus-width property to *main.dtsi, above the OTAP/ITAP > delay values. While there is no error with where it is > currently at, it is easier to read the MMC node if the > bus-width property is located above the OTAP/ITAP delay > values consistently across MMC nodes. > > Add missing bus-width for MMC2 in k3-am62-main. > > Signed-off-by: Judith Mendez <jm@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++-- > arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - > arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- > arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++ > arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 -- > arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 - I think you missed to update all non TI boards. Regards, Wadim > 6 files changed, 6 insertions(+), 7 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > index 410b390ce5d5..55420eb1c620 100644 > --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > @@ -559,9 +559,9 @@ sdhci0: mmc@fa10000 { > clock-names = "clk_ahb", "clk_xin"; > assigned-clocks = <&k3_clks 57 6>; > assigned-clock-parents = <&k3_clks 57 8>; > + bus-width = <8>; > mmc-ddr-1_8v; > mmc-hs200-1_8v; > - bus-width = <8>; > ti,clkbuf-sel = <0x7>; > ti,otap-del-sel-legacy = <0x0>; > ti,otap-del-sel-mmc-hs = <0x0>; > @@ -579,6 +579,7 @@ sdhci1: mmc@fa00000 { > power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; > clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; > clock-names = "clk_ahb", "clk_xin"; > + bus-width = <4>; > ti,clkbuf-sel = <0x7>; > ti,otap-del-sel-legacy = <0x8>; > ti,otap-del-sel-sd-hs = <0x0>; > @@ -591,7 +592,6 @@ sdhci1: mmc@fa00000 { > ti,itap-del-sel-sd-hs = <0x1>; > ti,itap-del-sel-sdr12 = <0xa>; > ti,itap-del-sel-sdr25 = <0x1>; > - bus-width = <4>; > status = "disabled"; > }; > > @@ -602,6 +602,7 @@ sdhci2: mmc@fa20000 { > power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; > clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; > clock-names = "clk_ahb", "clk_xin"; > + bus-width = <4>; > ti,clkbuf-sel = <0x7>; > ti,otap-del-sel-legacy = <0x8>; > ti,otap-del-sel-sd-hs = <0x0>; > diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > index bb6a5837bcb3..a34e0df2ab86 100644 > --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > @@ -842,7 +842,6 @@ &sdhci2 { > vmmc-supply = <&wlan_en>; > pinctrl-names = "default"; > pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>; > - bus-width = <4>; > non-removable; > ti,fails-without-test-cd; > cap-power-off-card; > diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi > index ddb76cd66f88..253c1857eedf 100644 > --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi > @@ -561,6 +561,7 @@ sdhci1: mmc@fa00000 { > power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; > clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; > clock-names = "clk_ahb", "clk_xin"; > + bus-width = <4>; > ti,clkbuf-sel = <0x7>; > ti,otap-del-sel-legacy = <0x0>; > ti,otap-del-sel-sd-hs = <0x0>; > @@ -573,7 +574,6 @@ sdhci1: mmc@fa00000 { > ti,itap-del-sel-sd-hs = <0x0>; > ti,itap-del-sel-sdr12 = <0x0>; > ti,itap-del-sel-sdr25 = <0x0>; > - bus-width = <4>; > no-1-8-v; > status = "disabled"; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > index bea05be7cb48..bc9c9ff993e6 100644 > --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > @@ -626,6 +626,7 @@ sdhci0: mmc@fa10000 { > power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; > clocks = <&k3_clks 57 0>, <&k3_clks 57 1>; > clock-names = "clk_ahb", "clk_xin"; > + bus-width = <8>; > mmc-ddr-1_8v; > mmc-hs200-1_8v; > ti,clkbuf-sel = <0x7>; > @@ -647,6 +648,7 @@ sdhci1: mmc@fa00000 { > power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; > clocks = <&k3_clks 58 3>, <&k3_clks 58 4>; > clock-names = "clk_ahb", "clk_xin"; > + bus-width = <4>; > ti,clkbuf-sel = <0x7>; > ti,otap-del-sel-legacy = <0x0>; > ti,otap-del-sel-sd-hs = <0x0>; > diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts > index f308076d608a..83f2b00726b5 100644 > --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts > +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts > @@ -494,7 +494,6 @@ eeprom@0 { > /* eMMC */ > &sdhci0 { > status = "okay"; > - bus-width = <8>; > non-removable; > ti,driver-strength-ohm = <50>; > disable-wp; > @@ -506,7 +505,6 @@ &sdhci1 { > status = "okay"; > vmmc-supply = <&vdd_mmc1>; > pinctrl-names = "default"; > - bus-width = <4>; > pinctrl-0 = <&main_mmc1_pins_default>; > disable-wp; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts > index b286eaa02ada..67cd41bf806e 100644 > --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts > +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts > @@ -469,7 +469,6 @@ &sdhci1 { > status = "okay"; > vmmc-supply = <&vdd_mmc1>; > pinctrl-names = "default"; > - bus-width = <4>; > pinctrl-0 = <&main_mmc1_pins_default>; > disable-wp; > };
On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote: > Hi Judith, > > Am 13.02.24 um 01:24 schrieb Judith Mendez: > > Move bus-width property to *main.dtsi, above the OTAP/ITAP > > delay values. While there is no error with where it is > > currently at, it is easier to read the MMC node if the > > bus-width property is located above the OTAP/ITAP delay > > values consistently across MMC nodes. > > > > Add missing bus-width for MMC2 in k3-am62-main. > > > > Signed-off-by: Judith Mendez <jm@ti.com> > > --- > > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++-- > > arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - > > arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- > > arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++ > > arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 -- > > arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 - > > I think you missed to update all non TI boards. Not sure which boards are you referring to. I would not change the verdin-am62 boards, the bus-width there is consistent with the schematics, it's just correct and in the right place IMO. Francesco
Am 13.02.24 um 09:19 schrieb Francesco Dolcini: > On Tue, Feb 13, 2024 at 06:07:28AM +0100, Wadim Egorov wrote: >> Hi Judith, >> >> Am 13.02.24 um 01:24 schrieb Judith Mendez: >>> Move bus-width property to *main.dtsi, above the OTAP/ITAP >>> delay values. While there is no error with where it is >>> currently at, it is easier to read the MMC node if the >>> bus-width property is located above the OTAP/ITAP delay >>> values consistently across MMC nodes. >>> >>> Add missing bus-width for MMC2 in k3-am62-main. >>> >>> Signed-off-by: Judith Mendez <jm@ti.com> >>> --- >>> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++-- >>> arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - >>> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- >>> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 ++ >>> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 -- >>> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 - >> I think you missed to update all non TI boards. > Not sure which boards are you referring to. > > I would not change the verdin-am62 boards, the bus-width there is > consistent with the schematics, it's just correct and in the right place > IMO. Ah, yes. Agree. > > Francesco >
© 2016 - 2024 Red Hat, Inc.