PD major revision for the port partner is described in
GET_CONNECTOR_CAPABILITY and is only valid on UCSI 2.0 and newer. Update
the pd_revision on the partner if the UCSI version is 2.0 or newer.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---
$ cat /sys/class/typec/port2-partner/usb_power_delivery_revision
3.0

(no changes since v4)

Changes in v4:
  - Replace IS_MIN_VERSION macro and just compare version directly.

Changes in v2:
  - Formatting changes and update macro to use brackets.
  - Fix incorrect guard condition when checking connector capability.

 drivers/usb/typec/ucsi/ucsi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 7c5cecdd93d6..ae105383e69e 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -782,6 +782,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
 	}
 
 	desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
+	desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);
 
 	partner = typec_register_partner(con->port, &desc);
 	if (IS_ERR(partner)) {
@@ -856,6 +857,27 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 			con->num, u_role);
 }
 
+static int ucsi_check_connector_capability(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	if (!con->partner || con->ucsi->version < UCSI_VERSION_2_0)
+		return 0;
+
+	command = UCSI_GET_CONNECTOR_CAPABILITY | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->cap, sizeof(con->cap));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CONNECTOR_CAPABILITY failed (%d)\n", ret);
+		return ret;
+	}
+
+	typec_partner_set_pd_revision(con->partner,
+		UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags));
+
+	return ret;
+}
+
 static int ucsi_check_connection(struct ucsi_connector *con)
 {
 	u8 prev_flags = con->status.flags;
@@ -925,6 +947,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
+			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
 			    UCSI_CONSTAT_PWR_OPMODE_PD)
-- 
2.43.0.687.g38aa6559b0-goog

On Fri, Feb 09, 2024 at 02:37:32PM -0800, Abhishek Pandit-Subedi wrote:
> +	command = UCSI_GET_CONNECTOR_CAPABILITY | UCSI_CONNECTOR_NUMBER(con->num);
> +	ret = ucsi_send_command(con->ucsi, command, &con->cap, sizeof(con->cap));
> +	if (ret < 0) {
> +		dev_err(con->ucsi->dev, "GET_CONNECTOR_CAPABILITY failed (%d)\n", ret);
> +		return ret;
> +	}

Did you mean that above error is raised when the connector capability
isn't recognized?

Confused...

-- 
An old man doll... just what I always wanted! - Clara