Rename 'snps,host-vbus-glitches-quirk' to 'snps,host-vbus-glitches'.

Just describe the problem in the binding. So needn't 'quirk'.

Update description.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 8f5d250070c78..6685e6579e64c 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -273,11 +273,12 @@ properties:
       with an external supply.
     type: boolean
 
-  snps,host-vbus-glitches-quirk:
+  snps,host-vbus-glitches:
     description:
       When set, power off all Root Hub ports immediately after
       setting host mode to avoid vbus (negative) glitch happen in later
-      xhci reset. And the vbus will back to 5V automatically when reset done.
+      xhci reset. And the vbus will return to 5V automatically when reset
+      done.
     type: boolean
 
   snps,is-utmi-l1-suspend:

-- 
2.34.1