arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++ arch/arm/boot/dts/st/stm32mp135.dtsi | 11 ++++++ arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 ++++++++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 7 ++-- 4 files changed, 127 insertions(+), 3 deletions(-)
This serie aims to enable display support for the stm32mp135f-dk board
Those are only patches of the device-tree since the driver support has
already been added [1].
It respectivelly:
- adds support for the display controller on stm32mp135
- adds pinctrl for the display controller
- enables panel, backlight and display controller on
stm32mp135f-dk
Finally it fixes the flags on the panel default mode in the
'panel-simple' driver, allowing to override the default mode by one
described in the device tree, and push further the blanking limit on the
panel.
[1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
Raphael Gallais-Pou (5):
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: enable display support on stm32mp135f-dk board
drm/panel: simple: fix flags on RK043FN48H
drm/panel: simple: push blanking limit on RK32FN48H
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++
arch/arm/boot/dts/st/stm32mp135.dtsi | 11 ++++++
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 ++++++++++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 7 ++--
4 files changed, 127 insertions(+), 3 deletions(-)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240124-ltdc_mp13-2f86a782424c
Best regards,
--
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Hi Raphael
On 2/5/24 10:06, Raphael Gallais-Pou wrote:
> This serie aims to enable display support for the stm32mp135f-dk board
>
> Those are only patches of the device-tree since the driver support has
> already been added [1].
>
> It respectivelly:
> - adds support for the display controller on stm32mp135
> - adds pinctrl for the display controller
> - enables panel, backlight and display controller on
> stm32mp135f-dk
>
> Finally it fixes the flags on the panel default mode in the
> 'panel-simple' driver, allowing to override the default mode by one
> described in the device tree, and push further the blanking limit on the
> panel.
>
> [1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")
>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
> Raphael Gallais-Pou (5):
> ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
> ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
> ARM: dts: stm32: enable display support on stm32mp135f-dk board
> drm/panel: simple: fix flags on RK043FN48H
> drm/panel: simple: push blanking limit on RK32FN48H
>
> arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/st/stm32mp135.dtsi | 11 ++++++
> arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 ++++++++++++++++++++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 7 ++--
> 4 files changed, 127 insertions(+), 3 deletions(-)
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20240124-ltdc_mp13-2f86a782424c
>
> Best regards,
I got the following errors during YAML verification:
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: /soc/i2c@40012000/pinctrl@21:
failed to match any schema with compatible: ['microchip,mcp23017']
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-backlight: 'default-brightness-level' does not match any of the
regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18',
'jeida-24', 'vesa-24']
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: data-mapping: False schema does not allow ['bgr666']
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of
the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
panel-rgb: 'data-mapping' does not match any of the regexes:
'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
Do I miss something ?
Alex
Hi Alex
On 2/14/24 14:40, Alexandre TORGUE wrote:
> Hi Raphael
>
> On 2/5/24 10:06, Raphael Gallais-Pou wrote:
>> This serie aims to enable display support for the stm32mp135f-dk board
>>
>> Those are only patches of the device-tree since the driver support has
>> already been added [1].
>>
>> It respectivelly:
>> - adds support for the display controller on stm32mp135
>> - adds pinctrl for the display controller
>> - enables panel, backlight and display controller on
>> stm32mp135f-dk
>>
>> Finally it fixes the flags on the panel default mode in the
>> 'panel-simple' driver, allowing to override the default mode by one
>> described in the device tree, and push further the blanking limit on the
>> panel.
>>
>> [1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>> ---
>> Raphael Gallais-Pou (5):
>> ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
>> ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
>> ARM: dts: stm32: enable display support on stm32mp135f-dk board
>> drm/panel: simple: fix flags on RK043FN48H
>> drm/panel: simple: push blanking limit on RK32FN48H
>>
>> arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++
>> arch/arm/boot/dts/st/stm32mp135.dtsi | 11 ++++++
>> arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 ++++++++++++++++++++++++++++
>> drivers/gpu/drm/panel/panel-simple.c | 7 ++--
>> 4 files changed, 127 insertions(+), 3 deletions(-)
>> ---
>> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
>> change-id: 20240124-ltdc_mp13-2f86a782424c
>>
>> Best regards,
>
> I got the following errors during YAML verification:
>
> arch/arm/boot/dts/st/stm32mp135f-dk.dtb: /soc/i2c@40012000/pinctrl@21: failed
> to match any schema with compatible: ['microchip,mcp23017']
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-backlight: 'default-brightness-level' does not match any of the regexes:
> 'pinctrl-[0-9]+'
> from schema $id:
> http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18', 'jeida-24',
> 'vesa-24']
> from schema $id:
> http://devicetree.org/schemas/display/panel/panel-simple.yaml#
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
> from schema $id:
> http://devicetree.org/schemas/display/panel/panel-simple.yaml#
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-rgb: data-mapping: False schema does not allow ['bgr666']
> from schema $id:
> http://devicetree.org/schemas/display/panel/panel-simple.yaml#
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of the
> regexes: 'pinctrl-[0-9]+'
> from schema $id:
> http://devicetree.org/schemas/display/panel/panel-simple.yaml#
> /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb:
> panel-rgb: 'data-mapping' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
>
> Do I miss something ?
I think I messed using a wrong make option :
make DTBS_CHECK=y W=1 -j$(nproc) st/stm32mp135f-dk.dtb
instead of
make CHECK_DTBS=y W=1 -j$(nproc) st/stm32mp135f-dk.dtb
I'll send a fix promptly.
Thanks,
Raphaël
>
> Alex
>
>
Hi,
On Mon, 05 Feb 2024 10:06:50 +0100, Raphael Gallais-Pou wrote:
> This serie aims to enable display support for the stm32mp135f-dk board
>
> Those are only patches of the device-tree since the driver support has
> already been added [1].
>
> It respectivelly:
> - adds support for the display controller on stm32mp135
> - adds pinctrl for the display controller
> - enables panel, backlight and display controller on
> stm32mp135f-dk
>
> [...]
Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
[4/5] drm/panel: simple: fix flags on RK043FN48H
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=536090b695c429e9d672f72341a5b6fb147d389d
--
Neil
© 2016 - 2025 Red Hat, Inc.