1. Patchew
  2. linux
  3. [PATCH v4 0/2] media: i2c: Add support for GC08A3 sensor
  4. View patch

[PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor

Zhi Mao posted 2 patches 9 months, 1 week ago
There is a newer version of this series
[PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
Posted by Zhi Mao 9 months, 1 week ago 
Add YAML device tree binding for GC08A3 CMOS image sensor,
and the relevant MAINTAINERS entries.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 .../bindings/media/i2c/galaxycore,gc08a3.yaml | 112 ++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
new file mode 100644
index 000000000000..8c09e8c121e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+  The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: galaxycore,gc08a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dovdd-supply: true
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@31 {
+            compatible = "galaxycore,gc08a3";
+            reg = <0x31>;
+
+            clocks = <&gc08a3_clk>;
+
+            reset-gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&gc08a3_avdd>;
+            dovdd-supply = <&gc08a3_dovdd>;
+            dvdd-supply = <&gc08a3_dvdd>;
+
+            port {
+                sensor_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <336000000 207000000>;
+                    remote-endpoint = <&seninf_csi_port_0_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.25.1
Re: [PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
Posted by AngeloGioacchino Del Regno 9 months ago 
Il 04/02/24 07:15, Zhi Mao ha scritto:
> Add YAML device tree binding for GC08A3 CMOS image sensor,
> and the relevant MAINTAINERS entries.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Re: [PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
Posted by Laurent Pinchart 9 months, 1 week ago 
Hi Zhi,

Thank you for the patch.

On Sun, Feb 04, 2024 at 02:15:37PM +0800, Zhi Mao wrote:
> Add YAML device tree binding for GC08A3 CMOS image sensor,
> and the relevant MAINTAINERS entries.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../bindings/media/i2c/galaxycore,gc08a3.yaml | 112 ++++++++++++++++++
>  1 file changed, 112 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
> new file mode 100644
> index 000000000000..8c09e8c121e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2023 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
> +
> +maintainers:
> +  - Zhi Mao <zhi.mao@mediatek.com>
> +
> +description:
> +  The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
> +  interface and CCI (I2C compatible) control bus. The output format
> +  is raw Bayer.
> +
> +properties:
> +  compatible:
> +    const: galaxycore,gc08a3
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  dovdd-supply: true
> +
> +  avdd-supply: true
> +
> +  dvdd-supply: true
> +
> +  reset-gpios:
> +    description: Reference to the GPIO connected to the RESETB pin.
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +    description:
> +      Output port node, single endpoint describing the CSI-2 transmitter.
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            oneOf:
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +                  - const: 3
> +                  - const: 4
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +
> +          link-frequencies: true
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - reset-gpios
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        sensor@31 {
> +            compatible = "galaxycore,gc08a3";
> +            reg = <0x31>;
> +
> +            clocks = <&gc08a3_clk>;
> +
> +            reset-gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
> +
> +            avdd-supply = <&gc08a3_avdd>;
> +            dovdd-supply = <&gc08a3_dovdd>;
> +            dvdd-supply = <&gc08a3_dvdd>;
> +
> +            port {
> +                sensor_out: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <336000000 207000000>;
> +                    remote-endpoint = <&seninf_csi_port_0_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.