1. Patchew
  2. linux
  3. [PATCH 0/4] power: supply: core: align charge_behaviour format with docs
  4. View patch

[PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE

Thomas Weißschuh posted 4 patches 2 years ago
There is a newer version of this series
[PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE
Posted by Thomas Weißschuh 2 years ago 
The sysfs is documented to report both the current and all available
behaviours. For this POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE needs
to be implemented.

Note that this changes the format of the sysfs file
(to the documented format):

Before: "auto"
After:  "[auto] inhibit-charge"

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
---
 drivers/power/supply/mm8013.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/power/supply/mm8013.c b/drivers/power/supply/mm8013.c
index caa272b03564..695df8bd6cb0 100644
--- a/drivers/power/supply/mm8013.c
+++ b/drivers/power/supply/mm8013.c
@@ -72,6 +72,7 @@ static int mm8013_checkdevice(struct mm8013_chip *chip)
 static enum power_supply_property mm8013_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
+	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
@@ -113,6 +114,10 @@ static int mm8013_get_property(struct power_supply *psy,
 		else
 			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE:
+		val->intval = BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO)
+			    | BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE);
+		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		ret = regmap_read(chip->regmap, REG_FULL_CHARGE_CAPACITY, &regval);
 		if (ret < 0)

-- 
2.43.0
Re: [PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE
Posted by Konrad Dybcio 2 years ago 
On 4.02.2024 18:26, Thomas Weißschuh wrote:
> The sysfs is documented to report both the current and all available
> behaviours. For this POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE needs
> to be implemented.
> 
> Note that this changes the format of the sysfs file
> (to the documented format):
> 
> Before: "auto"
> After:  "[auto] inhibit-charge"
> 
> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
> ---

LGTM, thanks

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Re: [PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE
Posted by Hans de Goede 2 years ago 
Hi,

On 2/4/24 18:26, Thomas Weißschuh wrote:
> The sysfs is documented to report both the current and all available
> behaviours. For this POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE needs
> to be implemented.
> 
> Note that this changes the format of the sysfs file
> (to the documented format):
> 
> Before: "auto"
> After:  "[auto] inhibit-charge"
> 
> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>

Changing userspace API like this is never ideal, but given how
new the mm8013 driver is and that this brings things inline
with the docs I think that this should be fine:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans




> ---
>  drivers/power/supply/mm8013.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/power/supply/mm8013.c b/drivers/power/supply/mm8013.c
> index caa272b03564..695df8bd6cb0 100644
> --- a/drivers/power/supply/mm8013.c
> +++ b/drivers/power/supply/mm8013.c
> @@ -72,6 +72,7 @@ static int mm8013_checkdevice(struct mm8013_chip *chip)
>  static enum power_supply_property mm8013_battery_props[] = {
>  	POWER_SUPPLY_PROP_CAPACITY,
>  	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
> +	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE,
>  	POWER_SUPPLY_PROP_CHARGE_FULL,
>  	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
>  	POWER_SUPPLY_PROP_CHARGE_NOW,
> @@ -113,6 +114,10 @@ static int mm8013_get_property(struct power_supply *psy,
>  		else
>  			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO;
>  		break;
> +	case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE:
> +		val->intval = BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO)
> +			    | BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE);
> +		break;
>  	case POWER_SUPPLY_PROP_CHARGE_FULL:
>  		ret = regmap_read(chip->regmap, REG_FULL_CHARGE_CAPACITY, &regval);
>  		if (ret < 0)
>
Re: [PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE
Posted by Thomas Weißschuh 2 years ago 
On 2024-02-05 11:00:01+0100, Hans de Goede wrote:
> Hi,
> 
> On 2/4/24 18:26, Thomas Weißschuh wrote:
> > The sysfs is documented to report both the current and all available
> > behaviours. For this POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE needs
> > to be implemented.
> > 
> > Note that this changes the format of the sysfs file
> > (to the documented format):
> > 
> > Before: "auto"
> > After:  "[auto] inhibit-charge"
> > 
> > Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
> 
> Changing userspace API like this is never ideal, but given how
> new the mm8013 driver is and that this brings things inline
> with the docs I think that this should be fine:

I agree that it's unfortunate.

However looking at the datasheet [0] it seems to me the driver is
not correctly using the API.

Page 23 documents the flag CHG_INH as follows:

  CHG_INH : Charge Inhibit      When the current is more than or equal to charge
                                threshold current,
                                charge inhibit temperature (upper/lower limit) ：1
                                charge permission temperature or the current is
                                less than charge threshold current ：0

This is only diagnostic information and not a control-knob, which the API
was meant for.
So POWER_SUPPLY_STATUS_NOT_CHARGING seems like the better match.

> [..]

Thomas


[0] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdf
Re: [PATCH 3/4] power: supply: mm8013: implement POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE
Posted by Konrad Dybcio 1 year, 12 months ago 
On 5.02.2024 12:21, Thomas Weißschuh wrote:
> On 2024-02-05 11:00:01+0100, Hans de Goede wrote:
>> Hi,
>>
>> On 2/4/24 18:26, Thomas Weißschuh wrote:
>>> The sysfs is documented to report both the current and all available
>>> behaviours. For this POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR_AVAILABLE needs
>>> to be implemented.
>>>
>>> Note that this changes the format of the sysfs file
>>> (to the documented format):
>>>
>>> Before: "auto"
>>> After:  "[auto] inhibit-charge"
>>>
>>> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
>>
>> Changing userspace API like this is never ideal, but given how
>> new the mm8013 driver is and that this brings things inline
>> with the docs I think that this should be fine:
> 
> I agree that it's unfortunate.
> 
> However looking at the datasheet [0] it seems to me the driver is
> not correctly using the API.
> 
> Page 23 documents the flag CHG_INH as follows:
> 
>   CHG_INH : Charge Inhibit      When the current is more than or equal to charge
>                                 threshold current,
>                                 charge inhibit temperature (upper/lower limit) ：1
>                                 charge permission temperature or the current is
>                                 less than charge threshold current ：0
> 
> This is only diagnostic information and not a control-knob, which the API
> was meant for.
> So POWER_SUPPLY_STATUS_NOT_CHARGING seems like the better match.

Oh, that's definitely something I glossed over, thanks for taking a look!

I'll send a patch untangling this shortly.

Konrad

> 
>> [..]
> 
> Thomas
> 
> 
> [0] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdf

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.