Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + 1 file changed, 1 insertion(+)
The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are
used to configure the link speed, lane count and mode of operation of
the respective PCIe instance. Add compatible for allowing the PCIe
driver to obtain a regmap for the PCIE_CTRL register within the System
Controller device-tree node in order to configure the PCIe instance
accordingly.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
This patch is based on linux-next tagged next-20240131.
Documentation/devicetree/bindings/mfd/syscon.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 084b5c2a2a3c..da571a24e21f 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -73,6 +73,7 @@ properties:
- rockchip,rv1126-qos
- starfive,jh7100-sysmain
- ti,am654-dss-oldi-io-ctrl
+ - ti,k3-pcie-ctrl
- const: syscon
--
2.34.1On 1/31/24 5:23 AM, Siddharth Vadapalli wrote: > The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are > used to configure the link speed, lane count and mode of operation of > the respective PCIe instance. Add compatible for allowing the PCIe > driver to obtain a regmap for the PCIE_CTRL register within the System > Controller device-tree node in order to configure the PCIe instance > accordingly. > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> > --- > > This patch is based on linux-next tagged next-20240131. > > Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml > index 084b5c2a2a3c..da571a24e21f 100644 > --- a/Documentation/devicetree/bindings/mfd/syscon.yaml > +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml > @@ -73,6 +73,7 @@ properties: > - rockchip,rv1126-qos > - starfive,jh7100-sysmain > - ti,am654-dss-oldi-io-ctrl > + - ti,k3-pcie-ctrl This might not be the same for all K3 devices, you should use the name of the first device which uses this, so: ti,j721e-pcie-ctrl Andrew > > - const: syscon >
Hello Andrew, On 31/01/24 21:43, Andrew Davis wrote: > On 1/31/24 5:23 AM, Siddharth Vadapalli wrote: >> The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are >> used to configure the link speed, lane count and mode of operation of >> the respective PCIe instance. Add compatible for allowing the PCIe >> driver to obtain a regmap for the PCIE_CTRL register within the System >> Controller device-tree node in order to configure the PCIe instance >> accordingly. >> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >> --- >> >> This patch is based on linux-next tagged next-20240131. >> >> Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml >> b/Documentation/devicetree/bindings/mfd/syscon.yaml >> index 084b5c2a2a3c..da571a24e21f 100644 >> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml >> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml >> @@ -73,6 +73,7 @@ properties: >> - rockchip,rv1126-qos >> - starfive,jh7100-sysmain >> - ti,am654-dss-oldi-io-ctrl >> + - ti,k3-pcie-ctrl > > This might not be the same for all K3 devices, you should use > the name of the first device which uses this, so: > > ti,j721e-pcie-ctrl It is the same for all K3 devices so far. However, since the convention appears to be the first device that it is applicable to as you pointed out, I will post the v2 patch for this accordingly. -- Regards, Siddharth.
On 01/02/2024 05:48, Siddharth Vadapalli wrote: > Hello Andrew, > > On 31/01/24 21:43, Andrew Davis wrote: >> On 1/31/24 5:23 AM, Siddharth Vadapalli wrote: >>> The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are >>> used to configure the link speed, lane count and mode of operation of >>> the respective PCIe instance. Add compatible for allowing the PCIe >>> driver to obtain a regmap for the PCIE_CTRL register within the System >>> Controller device-tree node in order to configure the PCIe instance >>> accordingly. >>> >>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>> --- >>> >>> This patch is based on linux-next tagged next-20240131. >>> >>> Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml >>> b/Documentation/devicetree/bindings/mfd/syscon.yaml >>> index 084b5c2a2a3c..da571a24e21f 100644 >>> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml >>> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml >>> @@ -73,6 +73,7 @@ properties: >>> - rockchip,rv1126-qos >>> - starfive,jh7100-sysmain >>> - ti,am654-dss-oldi-io-ctrl >>> + - ti,k3-pcie-ctrl >> >> This might not be the same for all K3 devices, you should use >> the name of the first device which uses this, so: >> >> ti,j721e-pcie-ctrl > > It is the same for all K3 devices so far. However, since the convention appears > to be the first device that it is applicable to as you pointed out, I will post > the v2 patch for this accordingly. This was repeated so many times... so one more. Compatibles are specific to SoC, not to family. https://elixir.bootlin.com/linux/v6.1-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42 Best regards, Krzysztof
Hello Krzysztof, On 01/02/24 13:01, Krzysztof Kozlowski wrote: > On 01/02/2024 05:48, Siddharth Vadapalli wrote: >> Hello Andrew, >> >> On 31/01/24 21:43, Andrew Davis wrote: >>> On 1/31/24 5:23 AM, Siddharth Vadapalli wrote: >>>> The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are >>>> used to configure the link speed, lane count and mode of operation of >>>> the respective PCIe instance. Add compatible for allowing the PCIe >>>> driver to obtain a regmap for the PCIE_CTRL register within the System >>>> Controller device-tree node in order to configure the PCIe instance >>>> accordingly. >>>> >>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>>> --- >>>> >>>> This patch is based on linux-next tagged next-20240131. >>>> >>>> Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + >>>> 1 file changed, 1 insertion(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml >>>> b/Documentation/devicetree/bindings/mfd/syscon.yaml >>>> index 084b5c2a2a3c..da571a24e21f 100644 >>>> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml >>>> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml >>>> @@ -73,6 +73,7 @@ properties: >>>> - rockchip,rv1126-qos >>>> - starfive,jh7100-sysmain >>>> - ti,am654-dss-oldi-io-ctrl >>>> + - ti,k3-pcie-ctrl >>> >>> This might not be the same for all K3 devices, you should use >>> the name of the first device which uses this, so: >>> >>> ti,j721e-pcie-ctrl >> >> It is the same for all K3 devices so far. However, since the convention appears >> to be the first device that it is applicable to as you pointed out, I will post >> the v2 patch for this accordingly. > > This was repeated so many times... so one more. Compatibles are specific > to SoC, not to family. > > https://elixir.bootlin.com/linux/v6.1-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42 Thank you for reviewing the patch and sharing your feedback. I will make sure not to repeat this in my future patches. -- Regards, Siddharth.
© 2016 - 2025 Red Hat, Inc.