Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
of using the default value of 390KHz from MDIO default divider.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..08ddfeece043 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -264,6 +264,8 @@ mdio: mdio@90000 {
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 
+			clock-frequency = <6250000>;
+
 			status = "disabled";
 		};
 
-- 
2.43.0

On Wed, 31 Jan 2024 03:27:29 +0100, Christian Marangi wrote:
> Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
> of using the default value of 390KHz from MDIO default divider.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
      commit: cb77d0ad460e2c97a00c02ed78afdf45476e5e5f

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

On 31.01.2024 03:27, Christian Marangi wrote:
> Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
> of using the default value of 390KHz from MDIO default divider.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad