Hi everyone,

This short patch series adds a device-tree binding support to the TI's PHY
DP83640. The goal is to be able to enable or disable the following features
through the device tree:
   - Energy Detect Mode
   - PHY Control Frames
   - LED Configuration
   - Fiber Mode

Bastien Curutchet (2):
  dt-bindings: net: Add TI DP83640
  net: phy: Add some configuration from device-tree

 .../devicetree/bindings/net/ti,dp83640.yaml   | 113 +++++++++++++++
 drivers/net/phy/dp83640.c                     | 131 +++++++++++++++++-
 drivers/net/phy/dp83640_reg.h                 |  21 ++-
 include/dt-bindings/net/ti-dp83640.h          |  18 +++
 4 files changed, 281 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83640.yaml
 create mode 100644 include/dt-bindings/net/ti-dp83640.h

-- 
2.43.0