The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.

The other device difference is the trackpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes since v4:
- Fix pinmux node names
- Split anx7625 reset and power-en pins into separate pinmux nodes
- Change "touchpad" to "trackpad" in commit log

Changes since v3:
none

Changes since v2:
- Picked up Conor's ack

Changes since v1:
- Removed trackpad_pins reference (moved to i2c2 in corsola dtsi)
- Fixed copyright year
- Renamed touchpad to trackpad
---
 arch/arm64/boot/dts/mediatek/Makefile         |   2 +
 .../mt8186-corsola-steelix-sku131072.dts      |  18 ++
 .../mt8186-corsola-steelix-sku131073.dts      |  18 ++
 .../dts/mediatek/mt8186-corsola-steelix.dtsi  | 199 ++++++++++++++++++
 4 files changed, 237 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 22812b175736..0daa1ad27c22 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 000000000000..eae17bca8585
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131072", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 000000000000..a55375b95d0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131073", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 000000000000..e74e886a00cb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		goodix,no-reset-during-suspend;
+	};
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <22000>;
+
+	/* second source component */
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+};
-- 
2.43.0.429.g432eaa2c6b-goog

Il 26/01/24 09:37, Chen-Yu Tsai ha scritto:
> The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
> is a convertible device based on a common design of the same name. The
> device comes in different variants. Of them, whether a world facing
> camera is integrated is the only differentiating factor between the
> two device trees added. The different SKU IDs describe this alone.
> 
> The other device difference is the trackpad component used. This is
> simply handled by having both possible components described in the
> device tree, and letting the implementation figure out which one is
> actually available. The system bootloader / firmware does not
> differentiate this in that they share the same SKU IDs.
> 
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>