[v2] Support more Amlogic SoC families in crypto driver

[PATCH v2 20/20] arch: arm64: dts: meson: axg: add crypto node

Posted by Alexey Romanov 1 year, 11 months ago

This patch adds a crypto node declaration. With the
Amlogic crypto driver we can use HW implementation
of SHA1/224/256 and AES algo.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 7e5ac9db93f8..39ecb894668e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -286,6 +286,12 @@ ethmac: ethernet@ff3f0000 {
 			status = "disabled";
 		};
 
+		crypto: crypto@ff63e000 {
+			compatible = "amlogic,axg-crypto";
+			reg = <0x0 0xff63e000 0x0 0x48>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pcie_phy: phy@ff644000 {
 			compatible = "amlogic,axg-pcie-phy";
 			reg = <0x0 0xff644000 0x0 0x1c>;
-- 
2.34.1

Re: [PATCH v2 20/20] arch: arm64: dts: meson: axg: add crypto node

Posted by Krzysztof Kozlowski 1 year, 11 months ago

On 23/01/2024 17:58, Alexey Romanov wrote:
> This patch adds a crypto node declaration. With the
> Amlogic crypto driver we can use HW implementation
> of SHA1/224/256 and AES algo.
> 
> Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 7e5ac9db93f8..39ecb894668e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -286,6 +286,12 @@ ethmac: ethernet@ff3f0000 {
>  			status = "disabled";
>  		};
>  
> +		crypto: crypto@ff63e000 {
> +			compatible = "amlogic,axg-crypto";

Test your code.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof