Add start-redo-probe and no-channel-monitor property in mac config
to fix Mellanox cx7 nic card cannot't get mac address after nic card
re-plug.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 64075cc41d92..33c01d79e5e0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -89,6 +89,8 @@ &mac2 {
 	pinctrl-0 = <&pinctrl_rmii3_default>;
 	use-ncsi;
 	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
 };
 
 &mac3 {
@@ -97,6 +99,8 @@ &mac3 {
 	pinctrl-0 = <&pinctrl_rmii4_default>;
 	use-ncsi;
 	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
 };
 
 &fmc {
-- 
2.25.1

On 18/01/2024 07:00, Delphine CC Chiu wrote:
> Add start-redo-probe and no-channel-monitor property in mac config
> to fix Mellanox cx7 nic card cannot't get mac address after nic card
> re-plug.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> index 64075cc41d92..33c01d79e5e0 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -89,6 +89,8 @@ &mac2 {
>  	pinctrl-0 = <&pinctrl_rmii3_default>;
>  	use-ncsi;
>  	mlx,multi-host;
> +	ncsi-ctrl,start-redo-probe;
> +	ncsi-ctrl,no-channel-monitor;

There are no such properties.

NAK

Best regards,
Krzysztof