There's no need to clear the config->supported_interfaces bitmap before
reporting the supported interfaces as all bits in the bitmap will already
be initialized to zero when the phylink_config structure is allocated.
There's no code that would change the bitmap beforehand. Remove it.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/mt7530.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index e7e7e89d8eca..361a9cda48eb 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2558,8 +2558,6 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
 static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
 				     struct phylink_config *config)
 {
-	phy_interface_zero(config->supported_interfaces);
-
 	switch (port) {
 	/* Internal PHY */
 	case 0 ... 3:
-- 
2.40.1

On Sat, Jan 13, 2024 at 01:25:29PM +0300, Arınç ÜNAL wrote:
> There's no need to clear the config->supported_interfaces bitmap before
> reporting the supported interfaces as all bits in the bitmap will already
> be initialized to zero when the phylink_config structure is allocated.
> There's no code that would change the bitmap beforehand. Remove it.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Acked-by: Daniel Golle <daniel@makrotopia.org>
> ---

Yes, the "config" pointer points to &dp->phylink_config, and "dp" is
allocated by dsa_port_touch() with kzalloc(), so all its fields are
filled with zeroes.

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>