From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
pins provide expanded capabilities and are exclusive to the RZ/Five SoC.
Couple of port pins have different configuration and are not identical for
the complete port so introduce struct rzg2l_variable_pin_cfg to handle
such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().
Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
which support interrupt facility.
While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++-
1 file changed, 204 insertions(+), 9 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 8b8644d2c355..04bb21d564d4 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -57,6 +57,8 @@
#define PIN_CFG_IOLH_C BIT(13)
#define PIN_CFG_SOFT_PS BIT(14)
#define PIN_CFG_OEN BIT(15)
+#define PIN_CFG_VARIABLE BIT(16)
+#define PIN_CFG_NOGPIO_INT BIT(17)
#define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \
(PIN_CFG_IOLH_##group | \
@@ -76,17 +78,23 @@
PIN_CFG_FILNUM | \
PIN_CFG_FILCLKSEL)
-/*
- * n indicates number of pins in the port, a is the register index
- * and f is pin configuration capabilities supported.
- */
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
#define PIN_CFG_PIN_REG_MASK GENMASK(27, 20)
#define PIN_CFG_MASK GENMASK(19, 0)
-#define RZG2L_GPIO_PORT_PACK(n, a, f) ((((1ULL << (n)) - 1) << 28) | \
- FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
- FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+/*
+ * m indicates the bitmap of supported pins, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
+ FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
+ FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+
+/*
+ * n indicates number of pins in the port, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
/*
* BIT(63) indicates dedicated pin, p is the register index while
@@ -200,6 +208,18 @@ struct rzg2l_dedicated_configs {
u64 config;
};
+/**
+ * struct rzg2l_variable_pin_cfg - pin data cfg
+ * @cfg: port pin configuration
+ * @port: port number
+ * @pin: port pin
+ */
+struct rzg2l_variable_pin_cfg {
+ u32 cfg:20;
+ u8 port:5;
+ u8 pin:5;
+};
+
struct rzg2l_pinctrl_data {
const char * const *port_pins;
const u64 *port_pin_configs;
@@ -208,6 +228,8 @@ struct rzg2l_pinctrl_data {
unsigned int n_port_pins;
unsigned int n_dedicated_pins;
const struct rzg2l_hwcfg *hwcfg;
+ const struct rzg2l_variable_pin_cfg *variable_pin_cfg;
+ unsigned int n_variable_pin_cfg;
};
/**
@@ -243,6 +265,143 @@ struct rzg2l_pinctrl {
static const u16 available_ps[] = { 1800, 2500, 3300 };
+#ifdef CONFIG_RISCV
+static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl,
+ u64 pincfg,
+ unsigned int port,
+ u8 pin)
+{
+ unsigned int i;
+
+ for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) {
+ if (pctrl->data->variable_pin_cfg[i].port == port &&
+ pctrl->data->variable_pin_cfg[i].pin == pin)
+ return (pincfg & ~PIN_CFG_VARIABLE) | pctrl->data->variable_pin_cfg[i].cfg;
+ }
+
+ return 0;
+}
+
+static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = {
+ {
+ .port = 20,
+ .pin = 0,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 1,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 2,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 3,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 4,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 5,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 6,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 20,
+ .pin = 7,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 23,
+ .pin = 1,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT
+ },
+ {
+ .port = 23,
+ .pin = 2,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 23,
+ .pin = 3,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 23,
+ .pin = 4,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 23,
+ .pin = 5,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 0,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 1,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 2,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 3,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 4,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_NOGPIO_INT,
+ },
+ {
+ .port = 24,
+ .pin = 5,
+ .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_NOGPIO_INT,
+ },
+};
+#endif
+
static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
u8 pin, u8 off, u8 func)
{
@@ -1446,6 +1605,25 @@ static const u64 r9a07g043_gpio_configs[] = {
RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS),
+#ifdef CONFIG_RISCV
+ /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */
+ RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */
+ RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */
+ RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */
+ RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+ PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */
+ RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */
+ RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */
+ RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF |
+ PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+ PIN_CFG_NOGPIO_INT), /* P25 */
+ 0x0, /* P26 */
+ 0x0, /* P27 */
+ RZG2L_GPIO_PORT_PACK(6, 0x0f, RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT), /* P28 */
+#endif
};
static const u64 r9a08g045_gpio_configs[] = {
@@ -1606,12 +1784,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = {
PIN_CFG_IO_VMC_SD1)) },
};
-static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data)
+static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl)
{
+ const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq];
+ const struct rzg2l_pinctrl_data *data = pctrl->data;
+ u64 *pin_data = pin_desc->drv_data;
unsigned int gpioint;
unsigned int i;
u32 port, bit;
+ if (*pin_data & PIN_CFG_NOGPIO_INT)
+ return -EINVAL;
+
port = virq / 8;
bit = virq % 8;
@@ -1721,7 +1905,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
unsigned long flags;
int gpioint, irq;
- gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data);
+ gpioint = rzg2l_gpio_get_gpioint(child, pctrl);
if (gpioint < 0)
return gpioint;
@@ -1907,6 +2091,13 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
if (i && !(i % RZG2L_PINS_PER_PORT))
j++;
pin_data[i] = pctrl->data->port_pin_configs[j];
+#ifdef CONFIG_RISCV
+ if (pin_data[i] & PIN_CFG_VARIABLE)
+ pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl,
+ pin_data[i],
+ j,
+ i % RZG2L_PINS_PER_PORT);
+#endif
pins[i].drv_data = &pin_data[i];
}
@@ -2058,6 +2249,10 @@ static struct rzg2l_pinctrl_data r9a07g043_data = {
.n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
.hwcfg = &rzg2l_hwcfg,
+#ifdef CONFIG_RISCV
+ .variable_pin_cfg = r9a07g043f_variable_pin_cfg,
+ .n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg),
+#endif
};
static struct rzg2l_pinctrl_data r9a07g044_data = {
--
2.34.1Hi Prabhakar,
kernel test robot noticed the following build errors:
[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: powerpc-randconfig-r081-20240113 (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401140457.dWlCUkuN-lkp@intel.com/
All errors (new ones prefixed by >>):
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: error: anonymous bit-field has negative width (-1)
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:47: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
^
include/linux/bitfield.h:137:3: note: expanded from macro 'FIELD_PREP_CONST'
BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
^
include/linux/build_bug.h:16:53: note: expanded from macro 'BUILD_BUG_ON_ZERO'
#define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
vim +1579 drivers/pinctrl/renesas/pinctrl-rzg2l.c
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1535
943be6806bed3f Lad Prabhakar 2024-01-12 1536 static const u64 r9a07g044_gpio_configs[] = {
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1537 RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1538 RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1539 RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1540 RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1541 RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1542 RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1543 RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1544 RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1545 RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1546 RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1547 RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1548 RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1549 RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1550 RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1551 RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1552 RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1553 RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
fcfb63148c241a Biju Das 2021-09-22 1554 RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1555 RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1556 RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1557 RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1558 RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1559 RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1560 RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1561 RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1562 RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1563 RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1564 RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1565 RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1566 RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1567 RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1568 RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1569 RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1570 RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1571 RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1572 RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1573 RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1574 RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1575 RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1576 RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1577 RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1578 RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 @1579 RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1580 RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1581 RZG2L_GPIO_PORT_PACK(4, 0x3c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1582 RZG2L_GPIO_PORT_PACK(4, 0x3d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1583 RZG2L_GPIO_PORT_PACK(4, 0x3e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1584 RZG2L_GPIO_PORT_PACK(4, 0x3f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1585 RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1586 };
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1587
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Hi Prabhakar,
kernel test robot noticed the following build errors:
[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401132220.aTrR8ckA-lkp@intel.com/
All errors (new ones prefixed by >>):
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:730:31: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
730 | u8 pinmap = FIELD_GET(PIN_CFG_PIN_MAP_MASK, cfg);
| ^~~~~~~~~~~~~~~~~~~~
In file included from include/linux/bitfield.h:10:
drivers/pinctrl/renesas/pinctrl-rzg2l.c: At top level:
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[0]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[1]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[2]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[3]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[4]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[5]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[6]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[7]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[8]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[9]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[10]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[11]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[12]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[13]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[14]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[15]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[16]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[17]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[18]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[19]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
vim +89 drivers/pinctrl/renesas/pinctrl-rzg2l.c
84
85 /*
86 * m indicates the bitmap of supported pins, a is the register index
87 * and f is pin configuration capabilities supported.
88 */
> 89 #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
90 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
91 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
92
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
© 2016 - 2025 Red Hat, Inc.