This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues,
such as the TX timeout error, has been resolved.
With this setting, the driver will send the vendor command
to FW at startup, to enable power save feature.
User can disable this feature using the following vendor
command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
---
 drivers/bluetooth/btnxpuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
 
 /* Default configurations */
 #define DEFAULT_H2C_WAKEUP_MODE	WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE		PS_MODE_DISABLE
+#define DEFAULT_PS_MODE		PS_MODE_ENABLE
 #define FW_INIT_BAUDRATE	HCI_NXP_PRI_BAUDRATE
 
 static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
-- 
2.34.1

Dear Neeraj,


Thank you for your patch. Some nits below.

Am 11.01.24 um 09:06 schrieb Neeraj Sanjay Kale:
> This sets the default power save mode setting to enabled.

This contradicts the commit message summary, which says “Disable”.

> The power save feature is now stable and stress test issues,
> such as the TX timeout error, has been resolved.

have been

Please reference one commit, that fixed this.

> With this setting, the driver will send the vendor command
> to FW at startup, to enable power save feature.
> User can disable this feature using the following vendor
> command:
> hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)

It would help me, if you used the full 75 characters per line for commit 
messages, and would not break the line after every sentence. If a 
paragraph makes sense, please separate it by a  blank line.

> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
> ---
>   drivers/bluetooth/btnxpuart.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
> index 7f88b6f52f26..42e929f0d141 100644
> --- a/drivers/bluetooth/btnxpuart.c
> +++ b/drivers/bluetooth/btnxpuart.c
> @@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
>   
>   /* Default configurations */
>   #define DEFAULT_H2C_WAKEUP_MODE	WAKEUP_METHOD_BREAK
> -#define DEFAULT_PS_MODE		PS_MODE_DISABLE
> +#define DEFAULT_PS_MODE		PS_MODE_ENABLE
>   #define FW_INIT_BAUDRATE	HCI_NXP_PRI_BAUDRATE
>   
>   static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,

Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>


Kind regards,

Paul