SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.

Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
---
 drivers/spi/spi-bcm-qspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index ef08fcac2f6d..0407b91183ca 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/spi-mem.h>
+#include <linux/mtd/spi-nor.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
 #include "spi-bcm-qspi.h"
@@ -1221,7 +1221,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 
 	/* non-aligned and very short transfers are handled by MSPI */
 	if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) ||
-	    len < 4)
+	    len < 4 || op->cmd.opcode == SPINOR_OP_RDSFDP)
 		mspi_read = true;
 
 	if (!has_bspi(qspi) || mspi_read)
-- 
2.17.1

On Tue, 09 Jan 2024 16:00:32 -0500, Kamal Dasu wrote:
> SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
> call. This fixes SFDP parameter page read failures seen with parts that
> now use SFDP protocol to read the basic flash parameter table.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
      commit: f9540ac18bb4afd13d3a09275693793cb18d4afb

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

On 1/9/24 13:00, Kamal Dasu wrote:
> SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
> call. This fixes SFDP parameter page read failures seen with parts that
> now use SFDP protocol to read the basic flash parameter table.
> 
> Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
> Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian