[PATCH 1/5] staging: rtl8192e: rename variable is40MHz

Gary Rookard posted 5 patches 1 year, 11 months ago
[PATCH 1/5] staging: rtl8192e: rename variable is40MHz
Posted by Gary Rookard 1 year, 11 months ago
Coding style issue, checkpatch avoid CamelCase,
rename it. is40MHz -> is_40mhz

Signed-off-by: Gary Rookard <garyrookard@fastmail.org>
---
 drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtl819x_HTProc.c b/drivers/staging/rtl8192e/rtl819x_HTProc.c
index 6d0912f90198..1b1cb9514028 100644
--- a/drivers/staging/rtl8192e/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_HTProc.c
@@ -87,36 +87,36 @@ static u16 ht_mcs_to_data_rate(struct rtllib_device *ieee, u8 mcs_rate)
 {
 	struct rt_hi_throughput *ht_info = ieee->ht_info;
 
-	u8	is40MHz = (ht_info->cur_bw_40mhz) ? 1 : 0;
+	u8	is_40mhz = (ht_info->cur_bw_40mhz) ? 1 : 0;
 	u8	isShortGI = (ht_info->cur_bw_40mhz) ?
 			    ((ht_info->cur_short_gi_40mhz) ? 1 : 0) :
 			    ((ht_info->cur_short_gi_20mhz) ? 1 : 0);
-	return MCS_DATA_RATE[is40MHz][isShortGI][(mcs_rate & 0x7f)];
+	return MCS_DATA_RATE[is_40mhz][isShortGI][(mcs_rate & 0x7f)];
 }
 
 u16  tx_count_to_data_rate(struct rtllib_device *ieee, u8 data_rate)
 {
 	u16	cck_of_dm_rate[12] = {0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18,
 				   0x24, 0x30, 0x48, 0x60, 0x6c};
-	u8	is40MHz = 0;
+	u8	is_40mhz = 0;
 	u8	isShortGI = 0;
 
 	if (data_rate < 12)
 		return cck_of_dm_rate[data_rate];
 	if (data_rate >= 0x10 && data_rate <= 0x1f) {
-		is40MHz = 0;
+		is_40mhz = 0;
 		isShortGI = 0;
 	} else if (data_rate >= 0x20  && data_rate <= 0x2f) {
-		is40MHz = 1;
+		is_40mhz = 1;
 		isShortGI = 0;
 	} else if (data_rate >= 0x30  && data_rate <= 0x3f) {
-		is40MHz = 0;
+		is_40mhz = 0;
 		isShortGI = 1;
 	} else if (data_rate >= 0x40  && data_rate <= 0x4f) {
-		is40MHz = 1;
+		is_40mhz = 1;
 		isShortGI = 1;
 	}
-	return MCS_DATA_RATE[is40MHz][isShortGI][data_rate & 0xf];
+	return MCS_DATA_RATE[is_40mhz][isShortGI][data_rate & 0xf];
 }
 
 bool is_ht_half_nmode_aps(struct rtllib_device *ieee)
-- 
2.43.0
Re: [PATCH 1/5] staging: rtl8192e: rename variable is40MHz
Posted by Dan Carpenter 1 year, 11 months ago
On Sun, Jan 07, 2024 at 10:22:29PM -0500, Gary Rookard wrote:
> Coding style issue, checkpatch avoid CamelCase,
> rename it. is40MHz -> is_40mhz
> 
> Signed-off-by: Gary Rookard <garyrookard@fastmail.org>
> ---
>  drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/staging/rtl8192e/rtl819x_HTProc.c b/drivers/staging/rtl8192e/rtl819x_HTProc.c
> index 6d0912f90198..1b1cb9514028 100644
> --- a/drivers/staging/rtl8192e/rtl819x_HTProc.c
> +++ b/drivers/staging/rtl8192e/rtl819x_HTProc.c
> @@ -87,36 +87,36 @@ static u16 ht_mcs_to_data_rate(struct rtllib_device *ieee, u8 mcs_rate)
>  {
>  	struct rt_hi_throughput *ht_info = ieee->ht_info;
>  
> -	u8	is40MHz = (ht_info->cur_bw_40mhz) ? 1 : 0;
> +	u8	is_40mhz = (ht_info->cur_bw_40mhz) ? 1 : 0;

This should be is_40MHz.  It's metric.  M means Mega.  m means milli.

regards,
dan carpenter
Re: [PATCH 1/5] staging: rtl8192e: rename variable is40MHz
Posted by Gary Rookard 1 year, 11 months ago
Dan Carpenter <dan.carpenter@linaro.org> writes:

> On Sun, Jan 07, 2024 at 10:22:29PM -0500, Gary Rookard wrote:
>> Coding style issue, checkpatch avoid CamelCase,
>> rename it. is40MHz -> is_40mhz
>> 
>> Signed-off-by: Gary Rookard <garyrookard@fastmail.org>
>> ---
>>  drivers/staging/rtl8192e/rtl819x_HTProc.c | 16 ++++++++--------
>>  1 file changed, 8 insertions(+), 8 deletions(-)
>> 
>> diff --git a/drivers/staging/rtl8192e/rtl819x_HTProc.c b/drivers/staging/rtl8192e/rtl819x_HTProc.c
>> index 6d0912f90198..1b1cb9514028 100644
>> --- a/drivers/staging/rtl8192e/rtl819x_HTProc.c
>> +++ b/drivers/staging/rtl8192e/rtl819x_HTProc.c
>> @@ -87,36 +87,36 @@ static u16 ht_mcs_to_data_rate(struct rtllib_device *ieee, u8 mcs_rate)
>>  {
>>  	struct rt_hi_throughput *ht_info = ieee->ht_info;
>>  
>> -	u8	is40MHz = (ht_info->cur_bw_40mhz) ? 1 : 0;
>> +	u8	is_40mhz = (ht_info->cur_bw_40mhz) ? 1 : 0;
>
> This should be is_40MHz.  It's metric.  M means Mega.  m means milli.
>
> regards,
> dan carpenter
--
Okay, stupid me didin't give it to much thought that way,
...wow there's more that way then just mine
Good catch!
Regards,
Gary

-- 
Sent with my mu4e on Void GNU/Linux.