In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 761a6757dc26..26dbda713e51 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2198,6 +2198,7 @@ gpu: gpu@2c00000 {
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
+ #cooling-cells = <2>;
status = "disabled";
@@ -5101,8 +5102,15 @@ gpu-top-thermal {
thermal-sensors = <&tsens0 15>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_top_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu1_alert0: trip-point0 {
+ gpu_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -5281,8 +5289,15 @@ gpu-bottom-thermal {
thermal-sensors = <&tsens1 11>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_bottom_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
- gpu2_alert0: trip-point0 {
+ gpu_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
--
2.43.0