The SAW2 device is not a regulator. It is a frontend to the PMIC, which
handles voltage control, automatic voltage scaling and low-power states,
Rename SAW2 nodes to 'power-manager', the name which is suggested by
qcom,saw2.yaml
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 0621853c24dd..4b35b1fd4b58 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -586,7 +586,7 @@ acc0: clock-controller@2088000 {
#clock-cells = <0>;
};
- saw0: regulator@2089000 {
+ saw0: power-manager@2089000 {
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
@@ -601,7 +601,7 @@ acc1: clock-controller@2098000 {
#clock-cells = <0>;
};
- saw1: regulator@2099000 {
+ saw1: power-manager@2099000 {
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
--
2.39.2