ILI2901 requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 100ms,
so the post_gpio_reset_on_delay_ms is set to 100.

xiazhengqiao (2):
  dt-bindings: HID: i2c-hid: elan: Introduce bindings for Ilitek ili2901
  HID: i2c-hid: elan: Add ili2901 timing

 .../devicetree/bindings/input/elan,ekth6915.yaml          | 1 +
 drivers/hid/i2c-hid/i2c-hid-of-elan.c                     | 8 ++++++++
 2 files changed, 9 insertions(+)

-- 
2.17.1