From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

Ilitek touch IC driver answer to plain i2c read request, after it has
generated an interrupt request, with a report id message starting
with an identifier and a series of points.
If a request is sent unsolicited by an interrupt request the answer
do not contain this identifier.
Add a test to discard these messages, making the driver robust to
spurious interrupt requests.

Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
v3: added reviewed by
---
 drivers/input/touchscreen/ilitek_ts_i2c.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c
index 250133f0d68f..557362490244 100644
--- a/drivers/input/touchscreen/ilitek_ts_i2c.c
+++ b/drivers/input/touchscreen/ilitek_ts_i2c.c
@@ -37,6 +37,8 @@
 #define ILITEK_TP_CMD_GET_MCU_VER			0x61
 #define ILITEK_TP_CMD_GET_IC_MODE			0xC0
 
+#define ILITEK_TP_I2C_REPORT_ID				0x48
+
 #define REPORT_COUNT_ADDRESS				61
 #define ILITEK_SUPPORT_MAX_POINT			40
 
@@ -163,6 +165,11 @@ static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts)
 		goto err_sync_frame;
 	}
 
+	if (buf[0] != ILITEK_TP_I2C_REPORT_ID) {
+		dev_err(dev, "get touch info failed. Wrong id: 0x%02X\n", buf[0]);
+		goto err_sync_frame;
+	}
+
 	report_max_point = buf[REPORT_COUNT_ADDRESS];
 	if (report_max_point > ts->max_tp) {
 		dev_err(dev, "FW report max point:%d > panel info. max:%d\n",
-- 
2.25.1

On Fri, Dec 22, 2023 at 07:31:14PM +0100, Francesco Dolcini wrote:
> From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
> 
> Ilitek touch IC driver answer to plain i2c read request, after it has
> generated an interrupt request, with a report id message starting
> with an identifier and a series of points.
> If a request is sent unsolicited by an interrupt request the answer
> do not contain this identifier.
> Add a test to discard these messages, making the driver robust to
> spurious interrupt requests.
> 
> Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
> v3: added reviewed by
> ---
>  drivers/input/touchscreen/ilitek_ts_i2c.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c
> index 250133f0d68f..557362490244 100644
> --- a/drivers/input/touchscreen/ilitek_ts_i2c.c
> +++ b/drivers/input/touchscreen/ilitek_ts_i2c.c
> @@ -37,6 +37,8 @@
>  #define ILITEK_TP_CMD_GET_MCU_VER			0x61
>  #define ILITEK_TP_CMD_GET_IC_MODE			0xC0
>  
> +#define ILITEK_TP_I2C_REPORT_ID				0x48
> +
>  #define REPORT_COUNT_ADDRESS				61
>  #define ILITEK_SUPPORT_MAX_POINT			40
>  
> @@ -163,6 +165,11 @@ static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts)
>  		goto err_sync_frame;
>  	}
>  
> +	if (buf[0] != ILITEK_TP_I2C_REPORT_ID) {
> +		dev_err(dev, "get touch info failed. Wrong id: 0x%02X\n", buf[0]);
> +		goto err_sync_frame;

Please rebase and use direct return once you fix the previous patch.

Thanks.

-- 
Dmitry