Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to
enable detection.

Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
---
 drivers/net/phy/phy-c45.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 8e6fd4962c48..81ee2915bfc7 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -208,7 +208,8 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
 
 	adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP |
 		MDIO_AN_T1_ADV_L_PAUSE_ASYM;
-	adv_m_mask = MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
+	adv_m_mask = MDIO_AN_T1_ADV_M_1000BT1 | MDIO_AN_T1_ADV_M_100BT1 |
+		MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
 
 	switch (phydev->master_slave_set) {
 	case MASTER_SLAVE_CFG_MASTER_FORCE:
-- 
2.39.2

On Thu, Dec 21, 2023 at 08:28:50AM +0100, Dimitri Fedrau wrote:
> Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to
> enable detection.
> 
> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew