Instead of open coding bitshifting for various register fields,
use the bitfield macro FIELD_PREP(): this allows to enhance the
human readability, decrease likeliness of mistakes (and register
field overflowing) and also to simplify the code.
The latter is especially seen in mtk_dsi_rxtx_control(), where
it was possible to change a switch to a short for loop and to
also remove the need to check for maximum DSI lanes == 4 thanks
to the FIELD_PREP macro masking the value.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 95 ++++++++++++++++--------------
1 file changed, 50 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b618e2e31022..2ba6cd129150 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -70,16 +70,19 @@
#define DSI_PSCTRL 0x1c
#define DSI_PS_WC GENMASK(14, 0)
#define DSI_PS_SEL GENMASK(19, 16)
-#define PACKED_PS_16BIT_RGB565 (0 << 16)
-#define LOOSELY_PS_18BIT_RGB666 (1 << 16)
-#define PACKED_PS_18BIT_RGB666 (2 << 16)
-#define PACKED_PS_24BIT_RGB888 (3 << 16)
+#define PACKED_PS_16BIT_RGB565 0
+#define LOOSELY_PS_18BIT_RGB666 1
+#define PACKED_PS_18BIT_RGB666 2
+#define PACKED_PS_24BIT_RGB888 3
#define DSI_VSA_NL 0x20
#define DSI_VBP_NL 0x24
#define DSI_VFP_NL 0x28
#define DSI_VACT_NL 0x2C
+#define VACT_NL GENMASK(14, 0)
#define DSI_SIZE_CON 0x38
+#define DSI_HEIGHT GENMASK(30, 16)
+#define DSI_WIDTH GENMASK(14, 0)
#define DSI_HSA_WC 0x50
#define DSI_HBP_WC 0x54
#define DSI_HFP_WC 0x58
@@ -254,14 +257,23 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
timing->clk_hs_zero = timing->clk_hs_trail * 4;
timing->clk_hs_exit = 2 * timing->clk_hs_trail;
- timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
- timing->da_hs_zero << 16 | timing->da_hs_trail << 24;
- timcon1 = timing->ta_go | timing->ta_sure << 8 |
- timing->ta_get << 16 | timing->da_hs_exit << 24;
- timcon2 = 1 << 8 | timing->clk_hs_zero << 16 |
- timing->clk_hs_trail << 24;
- timcon3 = timing->clk_hs_prepare | timing->clk_hs_post << 8 |
- timing->clk_hs_exit << 16;
+ timcon0 = FIELD_PREP(LPX, timing->lpx) |
+ FIELD_PREP(HS_PREP, timing->da_hs_prepare) |
+ FIELD_PREP(HS_ZERO, timing->da_hs_zero) |
+ FIELD_PREP(HS_TRAIL, timing->da_hs_trail);
+
+ timcon1 = FIELD_PREP(TA_GO, timing->ta_go) |
+ FIELD_PREP(TA_SURE, timing->ta_sure) |
+ FIELD_PREP(TA_GET, timing->ta_get) |
+ FIELD_PREP(DA_HS_EXIT, timing->da_hs_exit);
+
+ timcon2 = FIELD_PREP(DA_HS_SYNC, 1) |
+ FIELD_PREP(CLK_ZERO, timing->clk_hs_zero) |
+ FIELD_PREP(CLK_TRAIL, timing->clk_hs_trail);
+
+ timcon3 = FIELD_PREP(CLK_HS_PREP, timing->clk_hs_prepare) |
+ FIELD_PREP(CLK_HS_POST, timing->clk_hs_post) |
+ FIELD_PREP(CLK_HS_EXIT, timing->clk_hs_exit);
writel(timcon0, dsi->regs + DSI_PHY_TIMECON0);
writel(timcon1, dsi->regs + DSI_PHY_TIMECON1);
@@ -354,69 +366,61 @@ static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi)
static void mtk_dsi_rxtx_control(struct mtk_dsi *dsi)
{
- u32 tmp_reg;
+ u32 regval, tmp_reg = 0;
+ u8 i;
- switch (dsi->lanes) {
- case 1:
- tmp_reg = 1 << 2;
- break;
- case 2:
- tmp_reg = 3 << 2;
- break;
- case 3:
- tmp_reg = 7 << 2;
- break;
- case 4:
- tmp_reg = 0xf << 2;
- break;
- default:
- tmp_reg = 0xf << 2;
- break;
- }
+ /* Number of DSI lanes (max 4 lanes), each bit enables one DSI lane. */
+ for (i = 0; i < dsi->lanes; i++)
+ tmp_reg |= BIT(i);
+
+ regval = FIELD_PREP(LANE_NUM, tmp_reg);
if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
- tmp_reg |= HSTX_CKLP_EN;
+ regval |= HSTX_CKLP_EN;
if (dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET)
- tmp_reg |= DIS_EOT;
+ regval |= DIS_EOT;
- writel(tmp_reg, dsi->regs + DSI_TXRX_CTRL);
+ writel(regval, dsi->regs + DSI_TXRX_CTRL);
}
static void mtk_dsi_ps_control(struct mtk_dsi *dsi, bool config_vact)
{
- struct videomode *vm = &dsi->vm;
- u32 dsi_buf_bpp, ps_wc;
- u32 ps_bpp_mode;
+ u32 dsi_buf_bpp, ps_val, ps_wc, vact_nl;
if (dsi->format == MIPI_DSI_FMT_RGB565)
dsi_buf_bpp = 2;
else
dsi_buf_bpp = 3;
- ps_wc = vm->hactive * dsi_buf_bpp;
- ps_bpp_mode = ps_wc;
+ /* Word count */
+ ps_wc = FIELD_PREP(DSI_PS_WC, dsi->vm.hactive * dsi_buf_bpp);
+ ps_val = ps_wc;
+ /* Pixel Stream type */
switch (dsi->format) {
+ default:
+ /* fallthrough */
case MIPI_DSI_FMT_RGB888:
- ps_bpp_mode |= PACKED_PS_24BIT_RGB888;
+ ps_val |= FIELD_PREP(DSI_PS_SEL, PACKED_PS_24BIT_RGB888);
break;
case MIPI_DSI_FMT_RGB666:
- ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
+ ps_val |= FIELD_PREP(DSI_PS_SEL, PACKED_PS_18BIT_RGB666);
break;
case MIPI_DSI_FMT_RGB666_PACKED:
- ps_bpp_mode |= LOOSELY_PS_18BIT_RGB666;
+ ps_val |= FIELD_PREP(DSI_PS_SEL, LOOSELY_PS_18BIT_RGB666);
break;
case MIPI_DSI_FMT_RGB565:
- ps_bpp_mode |= PACKED_PS_16BIT_RGB565;
+ ps_val |= FIELD_PREP(DSI_PS_SEL, PACKED_PS_16BIT_RGB565);
break;
}
if (config_vact) {
- writel(vm->vactive, dsi->regs + DSI_VACT_NL);
+ vact_nl = FIELD_PREP(VACT_NL, dsi->vm.vactive);
+ writel(vact_nl, dsi->regs + DSI_VACT_NL);
writel(ps_wc, dsi->regs + DSI_HSTX_CKL_WC);
}
- writel(ps_bpp_mode, dsi->regs + DSI_PSCTRL);
+ writel(ps_val, dsi->regs + DSI_PSCTRL);
}
static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
@@ -443,7 +447,8 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
writel(vm->vactive, dsi->regs + DSI_VACT_NL);
if (dsi->driver_data->has_size_ctl)
- writel(vm->vactive << 16 | vm->hactive,
+ writel(FIELD_PREP(DSI_HEIGHT, vm->vactive) |
+ FIELD_PREP(DSI_WIDTH, vm->hactive),
dsi->regs + DSI_SIZE_CON);
horizontal_sync_active_byte = (vm->hsync_len * dsi_tmp_buf_bpp - 10);
--
2.43.0
Hi AngeloGioacchino, kernel test robot noticed the following build errors: [auto build test ERROR on drm-misc/drm-misc-next] [also build test ERROR on drm/drm-next drm-exynos/exynos-drm-next drm-intel/for-linux-next-fixes drm-tip/drm-tip linus/master v6.7-rc6 next-20231222] [cannot apply to drm-intel/for-linux-next] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/drm-mediatek-dsi-Use-GENMASK-for-register-mask-definitions/20231222-164513 base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next patch link: https://lore.kernel.org/r/20231220135722.192080-4-angelogioacchino.delregno%40collabora.com patch subject: [PATCH v2 3/4] drm/mediatek: dsi: Use bitfield macros where useful config: arm-allmodconfig (https://download.01.org/0day-ci/archive/20231223/202312231512.ioiD48LA-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231223/202312231512.ioiD48LA-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202312231512.ioiD48LA-lkp@intel.com/ All errors (new ones prefixed by >>): drivers/gpu/drm/mediatek/mtk_dsi.c: In function 'mtk_dsi_phy_timconfig': >> drivers/gpu/drm/mediatek/mtk_dsi.c:260:19: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration] 260 | timcon0 = FIELD_PREP(LPX, timing->lpx) | | ^~~~~~~~~~ cc1: some warnings being treated as errors vim +/FIELD_PREP +260 drivers/gpu/drm/mediatek/mtk_dsi.c 236 237 static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi) 238 { 239 u32 timcon0, timcon1, timcon2, timcon3; 240 u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, 1000000); 241 struct mtk_phy_timing *timing = &dsi->phy_timing; 242 243 timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1; 244 timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000; 245 timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 - 246 timing->da_hs_prepare; 247 timing->da_hs_trail = timing->da_hs_prepare + 1; 248 249 timing->ta_go = 4 * timing->lpx - 2; 250 timing->ta_sure = timing->lpx + 2; 251 timing->ta_get = 4 * timing->lpx; 252 timing->da_hs_exit = 2 * timing->lpx + 1; 253 254 timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000); 255 timing->clk_hs_post = timing->clk_hs_prepare + 8; 256 timing->clk_hs_trail = timing->clk_hs_prepare; 257 timing->clk_hs_zero = timing->clk_hs_trail * 4; 258 timing->clk_hs_exit = 2 * timing->clk_hs_trail; 259 > 260 timcon0 = FIELD_PREP(LPX, timing->lpx) | 261 FIELD_PREP(HS_PREP, timing->da_hs_prepare) | 262 FIELD_PREP(HS_ZERO, timing->da_hs_zero) | 263 FIELD_PREP(HS_TRAIL, timing->da_hs_trail); 264 265 timcon1 = FIELD_PREP(TA_GO, timing->ta_go) | 266 FIELD_PREP(TA_SURE, timing->ta_sure) | 267 FIELD_PREP(TA_GET, timing->ta_get) | 268 FIELD_PREP(DA_HS_EXIT, timing->da_hs_exit); 269 270 timcon2 = FIELD_PREP(DA_HS_SYNC, 1) | 271 FIELD_PREP(CLK_ZERO, timing->clk_hs_zero) | 272 FIELD_PREP(CLK_TRAIL, timing->clk_hs_trail); 273 274 timcon3 = FIELD_PREP(CLK_HS_PREP, timing->clk_hs_prepare) | 275 FIELD_PREP(CLK_HS_POST, timing->clk_hs_post) | 276 FIELD_PREP(CLK_HS_EXIT, timing->clk_hs_exit); 277 278 writel(timcon0, dsi->regs + DSI_PHY_TIMECON0); 279 writel(timcon1, dsi->regs + DSI_PHY_TIMECON1); 280 writel(timcon2, dsi->regs + DSI_PHY_TIMECON2); 281 writel(timcon3, dsi->regs + DSI_PHY_TIMECON3); 282 } 283 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
© 2016 - 2024 Red Hat, Inc.