Some ARM SOCs have a separate display controller and GPU, each with
different drivers. For mediatek mt8173, the GPU driver is powervr,
and the display driver is mediatek. In the case of mediatek mt8183,
the GPU driver is panfrost, and the display driver is mediatek.
With rockchip rk3288/rk3399, the GPU driver is panfrost, while the
display driver is rockchip. For amlogic meson, the GPU driver is
panfrost, and the display driver is meson.

IGT tests run various tests with different xfails and can test both
GPU devices and KMS/display devices. Currently, in drm-ci for MediaTek,
Rockchip, and Amlogic Meson platforms, only the GPU driver is tested.
This leads to incomplete coverage since the display is never tested on
these platforms. This commit series adds support in drm-ci to run tests
for both GPU and display drivers for MediaTek, Rockchip, and Amlogic
Meson platforms.

This series depends on,
https://lore.kernel.org/dri-devel/e747581b-d5e0-4622-827b-48fb51fa9711@collabora.com/T/#t

Vignesh Raman (8):
  drm/ci: arm64.config: Enable CONFIG_DRM_ANALOGIX_ANX7625
  drm/ci: mediatek: Test both GPU and display drivers
  drm/ci: rockchip: Test both GPU and display drivers
  drm/ci: meson: Test both GPU and display drivers
  drm/ci: Do not set IGT_FORCE_DRIVER based on driver name
  MAINTAINERS: drm/ci: xfails: add entry for panfrost
  drm/ci: Rename xfails file
  drm/ci: Update xfails

 MAINTAINERS                                   |   1 +
 drivers/gpu/drm/ci/arm64.config               |   1 +
 drivers/gpu/drm/ci/igt_runner.sh              |  10 --
 drivers/gpu/drm/ci/test.yml                   | 107 ++++++++++++++----
 ....txt => mediatek-mt8173-display-fails.txt} |   0
 .../xfails/mediatek-mt8173-display-flakes.txt |  13 +++
 .../xfails/mediatek-mt8183-display-fails.txt  |   7 ++
 .../xfails/mediatek-mt8183-display-flakes.txt |   8 ++
 .../ci/xfails/meson-g12b-display-fails.txt    |  13 +++
 ...-fails.txt => panfrost-g12b-gpu-fails.txt} |   0
 ...ails.txt => panfrost-mt8183-gpu-fails.txt} |   0
 ...ails.txt => panfrost-rk3288-gpu-fails.txt} |   0
 ...kips.txt => panfrost-rk3288-gpu-skips.txt} |   0
 ...ails.txt => panfrost-rk3399-gpu-fails.txt} |   0
 ...kes.txt => panfrost-rk3399-gpu-flakes.txt} |   0
 ...kips.txt => panfrost-rk3399-gpu-skips.txt} |   0
 .../xfails/rockchip-rk3288-display-fails.txt  |  15 +++
 .../xfails/rockchip-rk3288-display-flakes.txt |  13 +++
 .../xfails/rockchip-rk3288-display-skips.txt  |   8 ++
 .../xfails/rockchip-rk3399-display-fails.txt  |  69 +++++++++++
 .../xfails/rockchip-rk3399-display-flakes.txt |  20 ++++
 .../xfails/rockchip-rk3399-display-skips.txt  |   6 +
 22 files changed, 261 insertions(+), 30 deletions(-)
 rename drivers/gpu/drm/ci/xfails/{mediatek-mt8173-fails.txt => mediatek-mt8173-display-fails.txt} (100%)
 create mode 100644 drivers/gpu/drm/ci/xfails/mediatek-mt8173-display-flakes.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/mediatek-mt8183-display-fails.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/mediatek-mt8183-display-flakes.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/meson-g12b-display-fails.txt
 rename drivers/gpu/drm/ci/xfails/{meson-g12b-fails.txt => panfrost-g12b-gpu-fails.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{mediatek-mt8183-fails.txt => panfrost-mt8183-gpu-fails.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{rockchip-rk3288-fails.txt => panfrost-rk3288-gpu-fails.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{rockchip-rk3288-skips.txt => panfrost-rk3288-gpu-skips.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{rockchip-rk3399-fails.txt => panfrost-rk3399-gpu-fails.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{rockchip-rk3399-flakes.txt => panfrost-rk3399-gpu-flakes.txt} (100%)
 rename drivers/gpu/drm/ci/xfails/{rockchip-rk3399-skips.txt => panfrost-rk3399-gpu-skips.txt} (100%)
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3288-display-fails.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3288-display-flakes.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3288-display-skips.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3399-display-fails.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3399-display-flakes.txt
 create mode 100644 drivers/gpu/drm/ci/xfails/rockchip-rk3399-display-skips.txt

-- 
2.40.1

Hi,

On Wed, 20 Dec 2023 at 12:11, Vignesh Raman <vignesh.raman@collabora.com> wrote:
> Some ARM SOCs have a separate display controller and GPU, each with
> different drivers. For mediatek mt8173, the GPU driver is powervr,
> and the display driver is mediatek. In the case of mediatek mt8183,
> the GPU driver is panfrost, and the display driver is mediatek.
> With rockchip rk3288/rk3399, the GPU driver is panfrost, while the
> display driver is rockchip. For amlogic meson, the GPU driver is
> panfrost, and the display driver is meson.
>
> IGT tests run various tests with different xfails and can test both
> GPU devices and KMS/display devices. Currently, in drm-ci for MediaTek,
> Rockchip, and Amlogic Meson platforms, only the GPU driver is tested.
> This leads to incomplete coverage since the display is never tested on
> these platforms. This commit series adds support in drm-ci to run tests
> for both GPU and display drivers for MediaTek, Rockchip, and Amlogic
> Meson platforms.

Thanks a lot for these. The patches need to be squashed to be
bisectable though. For example, patch #2 changes the MTK job names and
adds more jobs, but the corresponding xfail updates only come in #7
and #8. This means we have a span of a few patches where we don't have
useful test results.

A better sequencing would be something like:
  1. add ANX7625 config
  2. refactor _existing_ MTK display jobs to use YAML includes, change
the existing job name, and rename the existing xfail set, remove
IGT_FORCE_DRIVER from the script since it's now set by the job
  3. add MTK Panfrost+PVR GPU jobs with new xfails, add xfail entry to
MAINTAINERS
  4+5: same as 2+3 but for Amlogic
  6+7: same as 2+3 but for Rockchip

Then the separate rename/update xfail commits just disappear, as does
the removal of IGT_FORCE_DRIVER, because it's just done incrementally
as part of the commits which change the related functionality. It's
extremely important that every change can work standalone, instead of
introducing intermediate breakage which is only fixed in later commits
in the series.

Cheers,
Daniel

Hi Daniel,

On 09/01/24 19:08, Daniel Stone wrote:
> Hi,
> 
> On Wed, 20 Dec 2023 at 12:11, Vignesh Raman <vignesh.raman@collabora.com> wrote:
>> Some ARM SOCs have a separate display controller and GPU, each with
>> different drivers. For mediatek mt8173, the GPU driver is powervr,
>> and the display driver is mediatek. In the case of mediatek mt8183,
>> the GPU driver is panfrost, and the display driver is mediatek.
>> With rockchip rk3288/rk3399, the GPU driver is panfrost, while the
>> display driver is rockchip. For amlogic meson, the GPU driver is
>> panfrost, and the display driver is meson.
>>
>> IGT tests run various tests with different xfails and can test both
>> GPU devices and KMS/display devices. Currently, in drm-ci for MediaTek,
>> Rockchip, and Amlogic Meson platforms, only the GPU driver is tested.
>> This leads to incomplete coverage since the display is never tested on
>> these platforms. This commit series adds support in drm-ci to run tests
>> for both GPU and display drivers for MediaTek, Rockchip, and Amlogic
>> Meson platforms.
> 
> Thanks a lot for these. The patches need to be squashed to be
> bisectable though. For example, patch #2 changes the MTK job names and
> adds more jobs, but the corresponding xfail updates only come in #7
> and #8. This means we have a span of a few patches where we don't have
> useful test results.
> 
> A better sequencing would be something like:
>    1. add ANX7625 config
>    2. refactor _existing_ MTK display jobs to use YAML includes, change
> the existing job name, and rename the existing xfail set, remove
> IGT_FORCE_DRIVER from the script since it's now set by the job
>    3. add MTK Panfrost+PVR GPU jobs with new xfails, add xfail entry to
> MAINTAINERS
>    4+5: same as 2+3 but for Amlogic
>    6+7: same as 2+3 but for Rockchip
> 
> Then the separate rename/update xfail commits just disappear, as does
> the removal of IGT_FORCE_DRIVER, because it's just done incrementally
> as part of the commits which change the related functionality. It's
> extremely important that every change can work standalone, instead of
> introducing intermediate breakage which is only fixed in later commits
> in the series.

Thank you for reviewing the patches. I agree, will follow this sequence 
and send a v2 version.

Regards,
Vignesh

Hi Vignesh,

On Wed, 10 Jan 2024 at 10:47, Vignesh Raman <vignesh.raman@collabora.com> wrote:
> On 09/01/24 19:08, Daniel Stone wrote:
> > A better sequencing would be something like:
> >    1. add ANX7625 config
> >    2. refactor _existing_ MTK display jobs to use YAML includes, change
> > the existing job name, and rename the existing xfail set, remove
> > IGT_FORCE_DRIVER from the script since it's now set by the job
> >    3. add MTK Panfrost+PVR GPU jobs with new xfails, add xfail entry to
> > MAINTAINERS
> >    4+5: same as 2+3 but for Amlogic
> >    6+7: same as 2+3 but for Rockchip
> >
> > Then the separate rename/update xfail commits just disappear, as does
> > the removal of IGT_FORCE_DRIVER, because it's just done incrementally
> > as part of the commits which change the related functionality. It's
> > extremely important that every change can work standalone, instead of
> > introducing intermediate breakage which is only fixed in later commits
> > in the series.
>
> Thank you for reviewing the patches. I agree, will follow this sequence
> and send a v2 version.

Alongside Rob's patch to add msm-specific tests to the runlist, we'd
need to add the Panfrost-specific tests. Whilst we're here, we might
as well add the vc4/v3d/etnaviv/lima tests so they can use it in
future.

Panfrost should also skip kms_.* tests - since it's not a KMS driver,
it can't run the KMS tests, so there's no point in trying.

Cheers,
Daniel

Hi Daniel,

On 11/01/24 23:41, Daniel Stone wrote:
> Hi Vignesh,
> 
> On Wed, 10 Jan 2024 at 10:47, Vignesh Raman <vignesh.raman@collabora.com> wrote:
>> On 09/01/24 19:08, Daniel Stone wrote:
>>> A better sequencing would be something like:
>>>     1. add ANX7625 config
>>>     2. refactor _existing_ MTK display jobs to use YAML includes, change
>>> the existing job name, and rename the existing xfail set, remove
>>> IGT_FORCE_DRIVER from the script since it's now set by the job
>>>     3. add MTK Panfrost+PVR GPU jobs with new xfails, add xfail entry to
>>> MAINTAINERS
>>>     4+5: same as 2+3 but for Amlogic
>>>     6+7: same as 2+3 but for Rockchip
>>>
>>> Then the separate rename/update xfail commits just disappear, as does
>>> the removal of IGT_FORCE_DRIVER, because it's just done incrementally
>>> as part of the commits which change the related functionality. It's
>>> extremely important that every change can work standalone, instead of
>>> introducing intermediate breakage which is only fixed in later commits
>>> in the series.
>>
>> Thank you for reviewing the patches. I agree, will follow this sequence
>> and send a v2 version.
> 
> Alongside Rob's patch to add msm-specific tests to the runlist, we'd
> need to add the Panfrost-specific tests. Whilst we're here, we might
> as well add the vc4/v3d/etnaviv/lima tests so they can use it in
> future.
> 
> Panfrost should also skip kms_.* tests - since it's not a KMS driver,
> it can't run the KMS tests, so there's no point in trying.

I will add these tests and update skips file. Sorry missed this before 
sending v2. I'm rechecking the xfails for the v2 series and will send
v3 with these changes. Thanks.

Regards,
Vignesh