From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Use preferred i2c_get_match_data() instead of device_get_match_data()
and i2c_client_get_device_id() to get the driver match data.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/tty/serial/sc16is7xx.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 8cbf54d0a16c..97a97a4bd71a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1798,17 +1798,14 @@ MODULE_ALIAS("spi:sc16is7xx");
 #ifdef CONFIG_SERIAL_SC16IS7XX_I2C
 static int sc16is7xx_i2c_probe(struct i2c_client *i2c)
 {
-	const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
 	const struct sc16is7xx_devtype *devtype;
 	struct regmap *regmaps[2];
 	unsigned int i;
 
-	if (i2c->dev.of_node) {
-		devtype = device_get_match_data(&i2c->dev);
-		if (!devtype)
-			return -ENODEV;
-	} else {
-		devtype = (struct sc16is7xx_devtype *)id->driver_data;
+	devtype = (struct sc16is7xx_devtype *)i2c_get_match_data(i2c);
+	if (!devtype) {
+		dev_err(&i2c->dev, "Failed to match device\n");
+		return -ENODEV;
 	}
 
 	for (i = 0; i < devtype->nr_uart; i++) {
-- 
2.39.2

On Tue, Dec 19, 2023 at 12:18:51PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> 
> Use preferred i2c_get_match_data() instead of device_get_match_data()
> and i2c_client_get_device_id() to get the driver match data.

As per SPI patch.

-- 
With Best Regards,
Andy Shevchenko