AIM300 is a module with QCS8550 SoC, UFS and PMIC chip.
AIM300 Series is a highly optimized family of modules designed to support
AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board
to support verification, evaluation and development.
Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++
1 file changed, 371 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
new file mode 100644
index 000000000000..04ca4597f952
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s4g_1p25>;
+ vdd-l12-supply = <&vreg_s6g_1p86>;
+ vdd-l15-supply = <&vreg_s6g_1p86>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l3c_0p9: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s4e_0p95: smps4 {
+ regulator-name = "vreg_s4e_0p95";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5e_1p08: smps5 {
+ regulator-name = "vreg_s5e_1p08";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1e_0p88: ldo1 {
+ regulator-name = "vreg_l1e_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e_0p9: ldo2 {
+ regulator-name = "vreg_l2e_0p9";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4f_0p5: smps4 {
+ regulator-name = "vreg_s4f_0p5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_0p9: ldo1 {
+ regulator-name = "vreg_l1f_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_0p88: ldo3 {
+ regulator-name = "vreg_l3f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ vreg_s1g_1p25: smps1 {
+ regulator-name = "vreg_s1g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2g_0p85: smps2 {
+ regulator-name = "vreg_s2g_0p85";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3g_0p8: smps3 {
+ regulator-name = "vreg_s3g_0p8";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4g_1p25: smps4 {
+ regulator-name = "vreg_s4g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5g_0p85: smps5 {
+ regulator-name = "vreg_s5g_0p85";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6g_1p86: smps6 {
+ regulator-name = "vreg_s6g_1p86";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1g_1p2: ldo1 {
+ regulator-name = "vreg_l1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2g_1p2: ldo2 {
+ regulator-name = "vreg_l2g_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_1p2: ldo3 {
+ regulator-name = "vreg_l3g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+ vdd-hba-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
--
2.17.1On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>
> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip.
> AIM300 Series is a highly optimized family of modules designed to support
> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board
> to support verification, evaluation and development.
>
> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++
> 1 file changed, 371 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
> new file mode 100644
> index 000000000000..04ca4597f952
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
> @@ -0,0 +1,371 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qcs8550.dtsi"
> +#include "pm8010.dtsi"
> +#include "pm8550.dtsi"
> +#include "pm8550b.dtsi"
> +#define PMK8550VE_SID 5
> +#include "pm8550ve.dtsi"
> +#include "pm8550vs.dtsi"
> +#include "pmk8550.dtsi"
> +#include "pmr735d_a.dtsi"
> +#include "pmr735d_b.dtsi"
> +
> +/ {
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
Is VPH_PWR regulator present on the SoM or on the carrier board?
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-l5-l16-supply = <&vreg_bob1>;
> + vdd-l6-l7-supply = <&vreg_bob1>;
> + vdd-l8-l9-supply = <&vreg_bob1>;
> + vdd-l11-supply = <&vreg_s4g_1p25>;
> + vdd-l12-supply = <&vreg_s6g_1p86>;
> + vdd-l15-supply = <&vreg_s6g_1p86>;
> + vdd-l17-supply = <&vreg_bob2>;
> +
> + vreg_bob1: bob1 {
> + regulator-name = "vreg_bob1";
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob2: bob2 {
> + regulator-name = "vreg_bob2";
> + regulator-min-microvolt = <2720000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1b_1p8: ldo1 {
> + regulator-name = "vreg_l1b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-name = "vreg_l2b_3p0";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5b_3p1: ldo5 {
> + regulator-name = "vreg_l5b_3p1";
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p8: ldo6 {
> + regulator-name = "vreg_l6b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_1p8: ldo7 {
> + regulator-name = "vreg_l7b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_1p8: ldo8 {
> + regulator-name = "vreg_l8b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_2p9: ldo9 {
> + regulator-name = "vreg_l9b_2p9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b_1p2: ldo11 {
> + regulator-name = "vreg_l11b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_1p8: ldo12 {
> + regulator-name = "vreg_l12b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_3p0: ldo13 {
> + regulator-name = "vreg_l13b_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_3p2: ldo14 {
> + regulator-name = "vreg_l14b_3p2";
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_1p8: ldo15 {
> + regulator-name = "vreg_l15b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_2p8: ldo16 {
> + regulator-name = "vreg_l16b_2p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_2p5: ldo17 {
> + regulator-name = "vreg_l17b_2p5";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-l1-supply = <&vreg_s4g_1p25>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> + vreg_l3c_0p9: ldo3 {
> + regulator-name = "vreg_l3c_0p9";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> + vreg_l1d_0p88: ldo1 {
> + regulator-name = "vreg_l1d_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> +
> + vreg_s4e_0p95: smps4 {
> + regulator-name = "vreg_s4e_0p95";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <984000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5e_1p08: smps5 {
> + regulator-name = "vreg_s5e_1p08";
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1120000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1e_0p88: ldo1 {
> + regulator-name = "vreg_l1e_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2e_0p9: ldo2 {
> + regulator-name = "vreg_l2e_0p9";
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3e_1p2: ldo3 {
> + regulator-name = "vreg_l3e_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> + vdd-s4-supply = <&vph_pwr>;
> +
> + vreg_s4f_0p5: smps4 {
> + regulator-name = "vreg_s4f_0p5";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <600000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1f_0p9: ldo1 {
> + regulator-name = "vreg_l1f_0p9";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2f_0p88: ldo2 {
> + regulator-name = "vreg_l2f_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3f_0p88: ldo3 {
> + regulator-name = "vreg_l3f_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-5 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "g";
> + vdd-l1-supply = <&vreg_s4g_1p25>;
> + vdd-l2-supply = <&vreg_s4g_1p25>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> +
> + vreg_s1g_1p25: smps1 {
> + regulator-name = "vreg_s1g_1p25";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s2g_0p85: smps2 {
> + regulator-name = "vreg_s2g_0p85";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s3g_0p8: smps3 {
> + regulator-name = "vreg_s3g_0p8";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s4g_1p25: smps4 {
> + regulator-name = "vreg_s4g_1p25";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5g_0p85: smps5 {
> + regulator-name = "vreg_s5g_0p85";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s6g_1p86: smps6 {
> + regulator-name = "vreg_s6g_1p86";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1g_1p2: ldo1 {
> + regulator-name = "vreg_l1g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2g_1p2: ldo2 {
> + regulator-name = "vreg_l2g_1p2";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3g_1p2: ldo3 {
> + regulator-name = "vreg_l3g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vreg_l17b_2p5>;
> + vcc-max-microamp = <1300000>;
> + vccq-supply = <&vreg_l1g_1p2>;
> + vccq-max-microamp = <1200000>;
> + vdd-hba-supply = <&vreg_l3g_1p2>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l1d_0p88>;
> + vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> --
> 2.17.1
>
>
--
With best wishes
Dmitry
On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote:
> On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>>
>> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip.
>> AIM300 Series is a highly optimized family of modules designed to support
>> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board
>> to support verification, evaluation and development.
>>
>> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++
>> 1 file changed, 371 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>> new file mode 100644
>> index 000000000000..04ca4597f952
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>> @@ -0,0 +1,371 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qcs8550.dtsi"
>> +#include "pm8010.dtsi"
>> +#include "pm8550.dtsi"
>> +#include "pm8550b.dtsi"
>> +#define PMK8550VE_SID 5
>> +#include "pm8550ve.dtsi"
>> +#include "pm8550vs.dtsi"
>> +#include "pmk8550.dtsi"
>> +#include "pmr735d_a.dtsi"
>> +#include "pmr735d_b.dtsi"
>> +
>> +/ {
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-min-microvolt = <3700000>;
>> + regulator-max-microvolt = <3700000>;
>> +
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +};
>
> Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM.
>
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + compatible = "qcom,pm8550-rpmh-regulators";
>> + qcom,pmic-id = "b";
>> +
>> + vdd-bob1-supply = <&vph_pwr>;
>> + vdd-bob2-supply = <&vph_pwr>;
>> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
>> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>> + vdd-l5-l16-supply = <&vreg_bob1>;
>> + vdd-l6-l7-supply = <&vreg_bob1>;
>> + vdd-l8-l9-supply = <&vreg_bob1>;
>> + vdd-l11-supply = <&vreg_s4g_1p25>;
>> + vdd-l12-supply = <&vreg_s6g_1p86>;
>> + vdd-l15-supply = <&vreg_s6g_1p86>;
>> + vdd-l17-supply = <&vreg_bob2>;
>> +
>> + vreg_bob1: bob1 {
>> + regulator-name = "vreg_bob1";
>> + regulator-min-microvolt = <3296000>;
>> + regulator-max-microvolt = <3960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_bob2: bob2 {
>> + regulator-name = "vreg_bob2";
>> + regulator-min-microvolt = <2720000>;
>> + regulator-max-microvolt = <3960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1b_1p8: ldo1 {
>> + regulator-name = "vreg_l1b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2b_3p0: ldo2 {
>> + regulator-name = "vreg_l2b_3p0";
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5b_3p1: ldo5 {
>> + regulator-name = "vreg_l5b_3p1";
>> + regulator-min-microvolt = <3104000>;
>> + regulator-max-microvolt = <3104000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6b_1p8: ldo6 {
>> + regulator-name = "vreg_l6b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7b_1p8: ldo7 {
>> + regulator-name = "vreg_l7b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8b_1p8: ldo8 {
>> + regulator-name = "vreg_l8b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9b_2p9: ldo9 {
>> + regulator-name = "vreg_l9b_2p9";
>> + regulator-min-microvolt = <2960000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11b_1p2: ldo11 {
>> + regulator-name = "vreg_l11b_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1504000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12b_1p8: ldo12 {
>> + regulator-name = "vreg_l12b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13b_3p0: ldo13 {
>> + regulator-name = "vreg_l13b_3p0";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l14b_3p2: ldo14 {
>> + regulator-name = "vreg_l14b_3p2";
>> + regulator-min-microvolt = <3200000>;
>> + regulator-max-microvolt = <3200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15b_1p8: ldo15 {
>> + regulator-name = "vreg_l15b_1p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16b_2p8: ldo16 {
>> + regulator-name = "vreg_l16b_2p8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17b_2p5: ldo17 {
>> + regulator-name = "vreg_l17b_2p5";
>> + regulator-min-microvolt = <2504000>;
>> + regulator-max-microvolt = <2504000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-1 {
>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>> + qcom,pmic-id = "c";
>> +
>> + vdd-l1-supply = <&vreg_s4g_1p25>;
>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>> +
>> + vreg_l3c_0p9: ldo3 {
>> + regulator-name = "vreg_l3c_0p9";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <912000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-2 {
>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>> + qcom,pmic-id = "d";
>> +
>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>> +
>> + vreg_l1d_0p88: ldo1 {
>> + regulator-name = "vreg_l1d_0p88";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <920000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-3 {
>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>> + qcom,pmic-id = "e";
>> +
>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> +
>> + vreg_s4e_0p95: smps4 {
>> + regulator-name = "vreg_s4e_0p95";
>> + regulator-min-microvolt = <904000>;
>> + regulator-max-microvolt = <984000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s5e_1p08: smps5 {
>> + regulator-name = "vreg_s5e_1p08";
>> + regulator-min-microvolt = <1010000>;
>> + regulator-max-microvolt = <1120000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1e_0p88: ldo1 {
>> + regulator-name = "vreg_l1e_0p88";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <912000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2e_0p9: ldo2 {
>> + regulator-name = "vreg_l2e_0p9";
>> + regulator-min-microvolt = <870000>;
>> + regulator-max-microvolt = <970000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3e_1p2: ldo3 {
>> + regulator-name = "vreg_l3e_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-4 {
>> + compatible = "qcom,pm8550ve-rpmh-regulators";
>> + qcom,pmic-id = "f";
>> +
>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>> + vdd-s4-supply = <&vph_pwr>;
>> +
>> + vreg_s4f_0p5: smps4 {
>> + regulator-name = "vreg_s4f_0p5";
>> + regulator-min-microvolt = <500000>;
>> + regulator-max-microvolt = <600000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1f_0p9: ldo1 {
>> + regulator-name = "vreg_l1f_0p9";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <912000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2f_0p88: ldo2 {
>> + regulator-name = "vreg_l2f_0p88";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <912000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3f_0p88: ldo3 {
>> + regulator-name = "vreg_l3f_0p88";
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <912000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-5 {
>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>> + qcom,pmic-id = "g";
>> + vdd-l1-supply = <&vreg_s4g_1p25>;
>> + vdd-l2-supply = <&vreg_s4g_1p25>;
>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> +
>> + vreg_s1g_1p25: smps1 {
>> + regulator-name = "vreg_s1g_1p25";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s2g_0p85: smps2 {
>> + regulator-name = "vreg_s2g_0p85";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s3g_0p8: smps3 {
>> + regulator-name = "vreg_s3g_0p8";
>> + regulator-min-microvolt = <300000>;
>> + regulator-max-microvolt = <1004000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s4g_1p25: smps4 {
>> + regulator-name = "vreg_s4g_1p25";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s5g_0p85: smps5 {
>> + regulator-name = "vreg_s5g_0p85";
>> + regulator-min-microvolt = <500000>;
>> + regulator-max-microvolt = <1004000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s6g_1p86: smps6 {
>> + regulator-name = "vreg_s6g_1p86";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1g_1p2: ldo1 {
>> + regulator-name = "vreg_l1g_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2g_1p2: ldo2 {
>> + regulator-name = "vreg_l2g_1p2";
>> + regulator-min-microvolt = <1100000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3g_1p2: ldo3 {
>> + regulator-name = "vreg_l3g_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +};
>> +
>> +&ufs_mem_hc {
>> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
>> + vcc-supply = <&vreg_l17b_2p5>;
>> + vcc-max-microamp = <1300000>;
>> + vccq-supply = <&vreg_l1g_1p2>;
>> + vccq-max-microamp = <1200000>;
>> + vdd-hba-supply = <&vreg_l3g_1p2>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&ufs_mem_phy {
>> + vdda-phy-supply = <&vreg_l1d_0p88>;
>> + vdda-pll-supply = <&vreg_l3e_1p2>;
>> +
>> + status = "okay";
>> +};
>> --
>> 2.17.1
>>
>>
>
>
--
Thx and BRs,
Tengfei Fan
On Wed, 20 Dec 2023 at 03:23, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>
>
>
> On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote:
> > On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
> >>
> >> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip.
> >> AIM300 Series is a highly optimized family of modules designed to support
> >> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board
> >> to support verification, evaluation and development.
> >>
> >> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> >> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> >> ---
> >> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++
> >> 1 file changed, 371 insertions(+)
> >> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
> >> new file mode 100644
> >> index 000000000000..04ca4597f952
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
> >> @@ -0,0 +1,371 @@
> >> +// SPDX-License-Identifier: BSD-3-Clause
> >> +/*
> >> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> >> + */
> >> +
> >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> >> +#include "qcs8550.dtsi"
> >> +#include "pm8010.dtsi"
> >> +#include "pm8550.dtsi"
> >> +#include "pm8550b.dtsi"
> >> +#define PMK8550VE_SID 5
> >> +#include "pm8550ve.dtsi"
> >> +#include "pm8550vs.dtsi"
> >> +#include "pmk8550.dtsi"
> >> +#include "pmr735d_a.dtsi"
> >> +#include "pmr735d_b.dtsi"
> >> +
> >> +/ {
> >> + vph_pwr: vph-pwr-regulator {
> >> + compatible = "regulator-fixed";
> >> + regulator-name = "vph_pwr";
> >> + regulator-min-microvolt = <3700000>;
> >> + regulator-max-microvolt = <3700000>;
> >> +
> >> + regulator-always-on;
> >> + regulator-boot-on;
> >> + };
> >> +};
> >
> > Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM.
If not for gmail, I could have missed your reply.
Maybe it is a good idea to add an explicit comment here.
BTW: what regulators are present on the carrier board rather than on the SoM?
> >
> >> +
> >> +&apps_rsc {
> >> + regulators-0 {
> >> + compatible = "qcom,pm8550-rpmh-regulators";
> >> + qcom,pmic-id = "b";
> >> +
> >> + vdd-bob1-supply = <&vph_pwr>;
> >> + vdd-bob2-supply = <&vph_pwr>;
> >> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
> >> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> >> + vdd-l3-supply = <&vreg_s4g_1p25>;
> >> + vdd-l5-l16-supply = <&vreg_bob1>;
> >> + vdd-l6-l7-supply = <&vreg_bob1>;
> >> + vdd-l8-l9-supply = <&vreg_bob1>;
> >> + vdd-l11-supply = <&vreg_s4g_1p25>;
> >> + vdd-l12-supply = <&vreg_s6g_1p86>;
> >> + vdd-l15-supply = <&vreg_s6g_1p86>;
> >> + vdd-l17-supply = <&vreg_bob2>;
> >> +
> >> + vreg_bob1: bob1 {
> >> + regulator-name = "vreg_bob1";
> >> + regulator-min-microvolt = <3296000>;
> >> + regulator-max-microvolt = <3960000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_bob2: bob2 {
> >> + regulator-name = "vreg_bob2";
> >> + regulator-min-microvolt = <2720000>;
> >> + regulator-max-microvolt = <3960000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l1b_1p8: ldo1 {
> >> + regulator-name = "vreg_l1b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <1800000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l2b_3p0: ldo2 {
> >> + regulator-name = "vreg_l2b_3p0";
> >> + regulator-min-microvolt = <3008000>;
> >> + regulator-max-microvolt = <3008000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l5b_3p1: ldo5 {
> >> + regulator-name = "vreg_l5b_3p1";
> >> + regulator-min-microvolt = <3104000>;
> >> + regulator-max-microvolt = <3104000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l6b_1p8: ldo6 {
> >> + regulator-name = "vreg_l6b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <3008000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l7b_1p8: ldo7 {
> >> + regulator-name = "vreg_l7b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <3008000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l8b_1p8: ldo8 {
> >> + regulator-name = "vreg_l8b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <3008000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l9b_2p9: ldo9 {
> >> + regulator-name = "vreg_l9b_2p9";
> >> + regulator-min-microvolt = <2960000>;
> >> + regulator-max-microvolt = <3008000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l11b_1p2: ldo11 {
> >> + regulator-name = "vreg_l11b_1p2";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1504000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l12b_1p8: ldo12 {
> >> + regulator-name = "vreg_l12b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <1800000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l13b_3p0: ldo13 {
> >> + regulator-name = "vreg_l13b_3p0";
> >> + regulator-min-microvolt = <3000000>;
> >> + regulator-max-microvolt = <3000000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l14b_3p2: ldo14 {
> >> + regulator-name = "vreg_l14b_3p2";
> >> + regulator-min-microvolt = <3200000>;
> >> + regulator-max-microvolt = <3200000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l15b_1p8: ldo15 {
> >> + regulator-name = "vreg_l15b_1p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <1800000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l16b_2p8: ldo16 {
> >> + regulator-name = "vreg_l16b_2p8";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <3300000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l17b_2p5: ldo17 {
> >> + regulator-name = "vreg_l17b_2p5";
> >> + regulator-min-microvolt = <2504000>;
> >> + regulator-max-microvolt = <2504000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +
> >> + regulators-1 {
> >> + compatible = "qcom,pm8550vs-rpmh-regulators";
> >> + qcom,pmic-id = "c";
> >> +
> >> + vdd-l1-supply = <&vreg_s4g_1p25>;
> >> + vdd-l2-supply = <&vreg_s4e_0p95>;
> >> + vdd-l3-supply = <&vreg_s4e_0p95>;
> >> +
> >> + vreg_l3c_0p9: ldo3 {
> >> + regulator-name = "vreg_l3c_0p9";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <912000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +
> >> + regulators-2 {
> >> + compatible = "qcom,pm8550vs-rpmh-regulators";
> >> + qcom,pmic-id = "d";
> >> +
> >> + vdd-l1-supply = <&vreg_s4e_0p95>;
> >> + vdd-l2-supply = <&vreg_s4e_0p95>;
> >> + vdd-l3-supply = <&vreg_s4e_0p95>;
> >> +
> >> + vreg_l1d_0p88: ldo1 {
> >> + regulator-name = "vreg_l1d_0p88";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <920000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +
> >> + regulators-3 {
> >> + compatible = "qcom,pm8550vs-rpmh-regulators";
> >> + qcom,pmic-id = "e";
> >> +
> >> + vdd-l1-supply = <&vreg_s4e_0p95>;
> >> + vdd-l2-supply = <&vreg_s4e_0p95>;
> >> + vdd-l3-supply = <&vreg_s4g_1p25>;
> >> + vdd-s4-supply = <&vph_pwr>;
> >> + vdd-s5-supply = <&vph_pwr>;
> >> +
> >> + vreg_s4e_0p95: smps4 {
> >> + regulator-name = "vreg_s4e_0p95";
> >> + regulator-min-microvolt = <904000>;
> >> + regulator-max-microvolt = <984000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s5e_1p08: smps5 {
> >> + regulator-name = "vreg_s5e_1p08";
> >> + regulator-min-microvolt = <1010000>;
> >> + regulator-max-microvolt = <1120000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l1e_0p88: ldo1 {
> >> + regulator-name = "vreg_l1e_0p88";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <912000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l2e_0p9: ldo2 {
> >> + regulator-name = "vreg_l2e_0p9";
> >> + regulator-min-microvolt = <870000>;
> >> + regulator-max-microvolt = <970000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l3e_1p2: ldo3 {
> >> + regulator-name = "vreg_l3e_1p2";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1200000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +
> >> + regulators-4 {
> >> + compatible = "qcom,pm8550ve-rpmh-regulators";
> >> + qcom,pmic-id = "f";
> >> +
> >> + vdd-l1-supply = <&vreg_s4e_0p95>;
> >> + vdd-l2-supply = <&vreg_s4e_0p95>;
> >> + vdd-l3-supply = <&vreg_s4e_0p95>;
> >> + vdd-s4-supply = <&vph_pwr>;
> >> +
> >> + vreg_s4f_0p5: smps4 {
> >> + regulator-name = "vreg_s4f_0p5";
> >> + regulator-min-microvolt = <500000>;
> >> + regulator-max-microvolt = <600000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l1f_0p9: ldo1 {
> >> + regulator-name = "vreg_l1f_0p9";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <912000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l2f_0p88: ldo2 {
> >> + regulator-name = "vreg_l2f_0p88";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <912000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l3f_0p88: ldo3 {
> >> + regulator-name = "vreg_l3f_0p88";
> >> + regulator-min-microvolt = <880000>;
> >> + regulator-max-microvolt = <912000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +
> >> + regulators-5 {
> >> + compatible = "qcom,pm8550vs-rpmh-regulators";
> >> + qcom,pmic-id = "g";
> >> + vdd-l1-supply = <&vreg_s4g_1p25>;
> >> + vdd-l2-supply = <&vreg_s4g_1p25>;
> >> + vdd-l3-supply = <&vreg_s4g_1p25>;
> >> + vdd-s1-supply = <&vph_pwr>;
> >> + vdd-s2-supply = <&vph_pwr>;
> >> + vdd-s3-supply = <&vph_pwr>;
> >> + vdd-s4-supply = <&vph_pwr>;
> >> + vdd-s5-supply = <&vph_pwr>;
> >> + vdd-s6-supply = <&vph_pwr>;
> >> +
> >> + vreg_s1g_1p25: smps1 {
> >> + regulator-name = "vreg_s1g_1p25";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1300000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s2g_0p85: smps2 {
> >> + regulator-name = "vreg_s2g_0p85";
> >> + regulator-min-microvolt = <800000>;
> >> + regulator-max-microvolt = <1000000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s3g_0p8: smps3 {
> >> + regulator-name = "vreg_s3g_0p8";
> >> + regulator-min-microvolt = <300000>;
> >> + regulator-max-microvolt = <1004000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s4g_1p25: smps4 {
> >> + regulator-name = "vreg_s4g_1p25";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1300000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s5g_0p85: smps5 {
> >> + regulator-name = "vreg_s5g_0p85";
> >> + regulator-min-microvolt = <500000>;
> >> + regulator-max-microvolt = <1004000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_s6g_1p86: smps6 {
> >> + regulator-name = "vreg_s6g_1p86";
> >> + regulator-min-microvolt = <1800000>;
> >> + regulator-max-microvolt = <2000000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l1g_1p2: ldo1 {
> >> + regulator-name = "vreg_l1g_1p2";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1200000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l2g_1p2: ldo2 {
> >> + regulator-name = "vreg_l2g_1p2";
> >> + regulator-min-microvolt = <1100000>;
> >> + regulator-max-microvolt = <1200000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> +
> >> + vreg_l3g_1p2: ldo3 {
> >> + regulator-name = "vreg_l3g_1p2";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1200000>;
> >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >> + };
> >> + };
> >> +};
> >> +
> >> +&ufs_mem_hc {
> >> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> >> + vcc-supply = <&vreg_l17b_2p5>;
> >> + vcc-max-microamp = <1300000>;
> >> + vccq-supply = <&vreg_l1g_1p2>;
> >> + vccq-max-microamp = <1200000>;
> >> + vdd-hba-supply = <&vreg_l3g_1p2>;
> >> +
> >> + status = "okay";
> >> +};
> >> +
> >> +&ufs_mem_phy {
> >> + vdda-phy-supply = <&vreg_l1d_0p88>;
> >> + vdda-pll-supply = <&vreg_l3e_1p2>;
> >> +
> >> + status = "okay";
> >> +};
> >> --
> >> 2.17.1
> >>
> >>
> >
> >
>
> --
> Thx and BRs,
> Tengfei Fan
--
With best wishes
Dmitry
On 12/20/2023 3:00 PM, Dmitry Baryshkov wrote:
> On Wed, 20 Dec 2023 at 03:23, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>>
>>
>>
>> On 12/19/2023 6:25 PM, Dmitry Baryshkov wrote:
>>> On Tue, 19 Dec 2023 at 02:52, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>>>>
>>>> AIM300 is a module with QCS8550 SoC, UFS and PMIC chip.
>>>> AIM300 Series is a highly optimized family of modules designed to support
>>>> AIoT applications. The Module is mounted onto Qualcomm AIoT carrier board
>>>> to support verification, evaluation and development.
>>>>
>>>> Co-developed-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 371 +++++++++++++++++++
>>>> 1 file changed, 371 insertions(+)
>>>> create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>>>> new file mode 100644
>>>> index 000000000000..04ca4597f952
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
>>>> @@ -0,0 +1,371 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>>> +#include "qcs8550.dtsi"
>>>> +#include "pm8010.dtsi"
>>>> +#include "pm8550.dtsi"
>>>> +#include "pm8550b.dtsi"
>>>> +#define PMK8550VE_SID 5
>>>> +#include "pm8550ve.dtsi"
>>>> +#include "pm8550vs.dtsi"
>>>> +#include "pmk8550.dtsi"
>>>> +#include "pmr735d_a.dtsi"
>>>> +#include "pmr735d_b.dtsi"
>>>> +
>>>> +/ {
>>>> + vph_pwr: vph-pwr-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vph_pwr";
>>>> + regulator-min-microvolt = <3700000>;
>>>> + regulator-max-microvolt = <3700000>;
>>>> +
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +};
>>>
>>> Is VPH_PWR regulator present on the SoM or on the carrier board?VPH_PWR regulator present on the SoM.
>
> If not for gmail, I could have missed your reply.
>
> Maybe it is a good idea to add an explicit comment here.
________________________________________
|AIM300 SoM |
| _____ |
| | | |
| |--->| UFS | |
| | |_____| |
| | |
| _________________ | _________ |
3.8v | | | | | | |
-------->| Regulatorss |----->| QCS8550 | |
| |_________________| | |_________| |
| | |
| | _____ |
| | | | |
| |--->| ... | |
| |_____| |
| |
|________________________________________|
VPH_PWR is obtained by vonverting 12v voltage into 3.8 voltage with a
3.8v buck. VPH_PWR is power supply for regulators in AIM300 SOM.
VPH_PWR regulator is defined in AIM300 SOM dtsi file.
>
> BTW: what regulators are present on the carrier board rather than on the SoM?
The regulators in pm8550, pm8550ve and pm8550vs are present on the SoM.
The regulators in pm8010 and pmr73d are present on the carrier board.
In the next version patch series, pm8010 and pmr73d will be moved from
SOM dtsi to carrier board dts file.
>
>>>
>>>> +
>>>> +&apps_rsc {
>>>> + regulators-0 {
>>>> + compatible = "qcom,pm8550-rpmh-regulators";
>>>> + qcom,pmic-id = "b";
>>>> +
>>>> + vdd-bob1-supply = <&vph_pwr>;
>>>> + vdd-bob2-supply = <&vph_pwr>;
>>>> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
>>>> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
>>>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>>>> + vdd-l5-l16-supply = <&vreg_bob1>;
>>>> + vdd-l6-l7-supply = <&vreg_bob1>;
>>>> + vdd-l8-l9-supply = <&vreg_bob1>;
>>>> + vdd-l11-supply = <&vreg_s4g_1p25>;
>>>> + vdd-l12-supply = <&vreg_s6g_1p86>;
>>>> + vdd-l15-supply = <&vreg_s6g_1p86>;
>>>> + vdd-l17-supply = <&vreg_bob2>;
>>>> +
>>>> + vreg_bob1: bob1 {
>>>> + regulator-name = "vreg_bob1";
>>>> + regulator-min-microvolt = <3296000>;
>>>> + regulator-max-microvolt = <3960000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_bob2: bob2 {
>>>> + regulator-name = "vreg_bob2";
>>>> + regulator-min-microvolt = <2720000>;
>>>> + regulator-max-microvolt = <3960000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l1b_1p8: ldo1 {
>>>> + regulator-name = "vreg_l1b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l2b_3p0: ldo2 {
>>>> + regulator-name = "vreg_l2b_3p0";
>>>> + regulator-min-microvolt = <3008000>;
>>>> + regulator-max-microvolt = <3008000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l5b_3p1: ldo5 {
>>>> + regulator-name = "vreg_l5b_3p1";
>>>> + regulator-min-microvolt = <3104000>;
>>>> + regulator-max-microvolt = <3104000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l6b_1p8: ldo6 {
>>>> + regulator-name = "vreg_l6b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3008000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l7b_1p8: ldo7 {
>>>> + regulator-name = "vreg_l7b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3008000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l8b_1p8: ldo8 {
>>>> + regulator-name = "vreg_l8b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3008000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l9b_2p9: ldo9 {
>>>> + regulator-name = "vreg_l9b_2p9";
>>>> + regulator-min-microvolt = <2960000>;
>>>> + regulator-max-microvolt = <3008000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l11b_1p2: ldo11 {
>>>> + regulator-name = "vreg_l11b_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1504000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l12b_1p8: ldo12 {
>>>> + regulator-name = "vreg_l12b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l13b_3p0: ldo13 {
>>>> + regulator-name = "vreg_l13b_3p0";
>>>> + regulator-min-microvolt = <3000000>;
>>>> + regulator-max-microvolt = <3000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l14b_3p2: ldo14 {
>>>> + regulator-name = "vreg_l14b_3p2";
>>>> + regulator-min-microvolt = <3200000>;
>>>> + regulator-max-microvolt = <3200000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l15b_1p8: ldo15 {
>>>> + regulator-name = "vreg_l15b_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l16b_2p8: ldo16 {
>>>> + regulator-name = "vreg_l16b_2p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l17b_2p5: ldo17 {
>>>> + regulator-name = "vreg_l17b_2p5";
>>>> + regulator-min-microvolt = <2504000>;
>>>> + regulator-max-microvolt = <2504000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +
>>>> + regulators-1 {
>>>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>>>> + qcom,pmic-id = "c";
>>>> +
>>>> + vdd-l1-supply = <&vreg_s4g_1p25>;
>>>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>>>> +
>>>> + vreg_l3c_0p9: ldo3 {
>>>> + regulator-name = "vreg_l3c_0p9";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <912000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +
>>>> + regulators-2 {
>>>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>>>> + qcom,pmic-id = "d";
>>>> +
>>>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>>>> +
>>>> + vreg_l1d_0p88: ldo1 {
>>>> + regulator-name = "vreg_l1d_0p88";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <920000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +
>>>> + regulators-3 {
>>>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>>>> + qcom,pmic-id = "e";
>>>> +
>>>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>>>> + vdd-s4-supply = <&vph_pwr>;
>>>> + vdd-s5-supply = <&vph_pwr>;
>>>> +
>>>> + vreg_s4e_0p95: smps4 {
>>>> + regulator-name = "vreg_s4e_0p95";
>>>> + regulator-min-microvolt = <904000>;
>>>> + regulator-max-microvolt = <984000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s5e_1p08: smps5 {
>>>> + regulator-name = "vreg_s5e_1p08";
>>>> + regulator-min-microvolt = <1010000>;
>>>> + regulator-max-microvolt = <1120000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l1e_0p88: ldo1 {
>>>> + regulator-name = "vreg_l1e_0p88";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <912000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l2e_0p9: ldo2 {
>>>> + regulator-name = "vreg_l2e_0p9";
>>>> + regulator-min-microvolt = <870000>;
>>>> + regulator-max-microvolt = <970000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l3e_1p2: ldo3 {
>>>> + regulator-name = "vreg_l3e_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +
>>>> + regulators-4 {
>>>> + compatible = "qcom,pm8550ve-rpmh-regulators";
>>>> + qcom,pmic-id = "f";
>>>> +
>>>> + vdd-l1-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l2-supply = <&vreg_s4e_0p95>;
>>>> + vdd-l3-supply = <&vreg_s4e_0p95>;
>>>> + vdd-s4-supply = <&vph_pwr>;
>>>> +
>>>> + vreg_s4f_0p5: smps4 {
>>>> + regulator-name = "vreg_s4f_0p5";
>>>> + regulator-min-microvolt = <500000>;
>>>> + regulator-max-microvolt = <600000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l1f_0p9: ldo1 {
>>>> + regulator-name = "vreg_l1f_0p9";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <912000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l2f_0p88: ldo2 {
>>>> + regulator-name = "vreg_l2f_0p88";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <912000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l3f_0p88: ldo3 {
>>>> + regulator-name = "vreg_l3f_0p88";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <912000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +
>>>> + regulators-5 {
>>>> + compatible = "qcom,pm8550vs-rpmh-regulators";
>>>> + qcom,pmic-id = "g";
>>>> + vdd-l1-supply = <&vreg_s4g_1p25>;
>>>> + vdd-l2-supply = <&vreg_s4g_1p25>;
>>>> + vdd-l3-supply = <&vreg_s4g_1p25>;
>>>> + vdd-s1-supply = <&vph_pwr>;
>>>> + vdd-s2-supply = <&vph_pwr>;
>>>> + vdd-s3-supply = <&vph_pwr>;
>>>> + vdd-s4-supply = <&vph_pwr>;
>>>> + vdd-s5-supply = <&vph_pwr>;
>>>> + vdd-s6-supply = <&vph_pwr>;
>>>> +
>>>> + vreg_s1g_1p25: smps1 {
>>>> + regulator-name = "vreg_s1g_1p25";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1300000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s2g_0p85: smps2 {
>>>> + regulator-name = "vreg_s2g_0p85";
>>>> + regulator-min-microvolt = <800000>;
>>>> + regulator-max-microvolt = <1000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s3g_0p8: smps3 {
>>>> + regulator-name = "vreg_s3g_0p8";
>>>> + regulator-min-microvolt = <300000>;
>>>> + regulator-max-microvolt = <1004000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s4g_1p25: smps4 {
>>>> + regulator-name = "vreg_s4g_1p25";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1300000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s5g_0p85: smps5 {
>>>> + regulator-name = "vreg_s5g_0p85";
>>>> + regulator-min-microvolt = <500000>;
>>>> + regulator-max-microvolt = <1004000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_s6g_1p86: smps6 {
>>>> + regulator-name = "vreg_s6g_1p86";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l1g_1p2: ldo1 {
>>>> + regulator-name = "vreg_l1g_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l2g_1p2: ldo2 {
>>>> + regulator-name = "vreg_l2g_1p2";
>>>> + regulator-min-microvolt = <1100000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> +
>>>> + vreg_l3g_1p2: ldo3 {
>>>> + regulator-name = "vreg_l3g_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&ufs_mem_hc {
>>>> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
>>>> + vcc-supply = <&vreg_l17b_2p5>;
>>>> + vcc-max-microamp = <1300000>;
>>>> + vccq-supply = <&vreg_l1g_1p2>;
>>>> + vccq-max-microamp = <1200000>;
>>>> + vdd-hba-supply = <&vreg_l3g_1p2>;
>>>> +
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&ufs_mem_phy {
>>>> + vdda-phy-supply = <&vreg_l1d_0p88>;
>>>> + vdda-pll-supply = <&vreg_l3e_1p2>;
>>>> +
>>>> + status = "okay";
>>>> +};
>>>> --
>>>> 2.17.1
>>>>
>>>>
>>>
>>>
>>
>> --
>> Thx and BRs,
>> Tengfei Fan
>
>
>
--
Thx and BRs,
Tengfei Fan
© 2016 - 2025 Red Hat, Inc.