Replace msleep(1) with usleep_range as suggested by timers-howto guide.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index a7d28848ee93..2b2f0fadaf84 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -916,9 +916,9 @@ static void at803x_link_change_notify(struct phy_device *phydev)
 		at803x_context_save(phydev, &context);
 
 		phy_device_reset(phydev, 1);
-		msleep(1);
+		usleep_range(1000, 2000);
 		phy_device_reset(phydev, 0);
-		msleep(1);
+		usleep_range(1000, 2000);
 
 		at803x_context_restore(phydev, &context);
 
@@ -1733,7 +1733,7 @@ static int qca83xx_resume(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	msleep(1);
+	usleep_range(1000, 2000);
 
 	return 0;
 }
-- 
2.40.1

On Mon, Dec 18, 2023 at 12:25:08AM +0100, Christian Marangi wrote:
> Replace msleep(1) with usleep_range as suggested by timers-howto guide.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew