This series adds support for Allwinner D1/T113s thermal sensor controller.
THIS controller is similar to the one on H6, but with only one sensor and
uses a different scale and offset values.

v6:
- Rebased onto 6.7.0-rc5

v5:
- Dropeed 'thermal-zones' node from sunxi-d1s-t113.dtsi

v4:
- Dropeed DT bindings example

v3:
- Fixed SoB tag again

v2:
- Fixed SoB tag
- Moved binding patch before driver changes

v1:
- Initial version

Maxim Kiselev (3):
  dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
  thermal: sun8i: Add D1/T113s THS controller support
  riscv: dts: allwinner: d1: Add thermal sensor

 .../thermal/allwinner,sun8i-a83t-ths.yaml       |  7 ++++++-
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi      | 17 +++++++++++++++++
 drivers/thermal/sun8i_thermal.c                 | 13 +++++++++++++
 3 files changed, 36 insertions(+), 1 deletion(-)

-- 
2.40.1

On 17/12/2023 22:06, Maksim Kiselev wrote:
> This series adds support for Allwinner D1/T113s thermal sensor controller.
> THIS controller is similar to the one on H6, but with only one sensor and
> uses a different scale and offset values.
> 
> v6:
> - Rebased onto 6.7.0-rc5

Applied, patch 1 & 2

Thanks


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog