The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org	# 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 49910279cb71..5b69219170a8 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -586,7 +586,7 @@ usb: usb@a6f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-- 
2.41.0

On Wed, Dec 13, 2023 at 06:31:31PM +0100, Johan Hovold wrote:
> The USB SS PHY interrupt needs to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states.
> 
> Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
> Cc: stable@vger.kernel.org	# 5.12
> Cc: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
> index 49910279cb71..5b69219170a8 100644
> --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
> @@ -586,7 +586,7 @@ usb: usb@a6f8800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  
>  			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> -					      <&intc GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
>  					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
>  					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
>  			interrupt-names = "hs_phy_irq", "ss_phy_irq",
> -- 
> 2.41.0
> 

-- 
மணிவண்ணன் சதாசிவம்

On 12/13/23 18:31, Johan Hovold wrote:
> The USB SS PHY interrupt needs to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states.
> 
> Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
> Cc: stable@vger.kernel.org	# 5.12
> Cc: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Matches the downstream kernel too (as it should!)

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad