The firmware ready value is 1, and get firmware ready status
function should explicitly test for that value. The firmware
ready value read will be 2 after driver load, and on unbind
till firmware rewrites the firmware ready back to 0, the value
seen by driver will be 2, which should be regarded as not ready.

Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
---
V3:
  - Removed unnecessary parenthesis around boolean return.

V2: https://lore.kernel.org/all/20231207074936.2597889-1-srasheed@marvell.com/
  - Fixed redundant logic

V1: https://lore.kernel.org/all/20231206063549.2590305-1-srasheed@marvell.com/

 drivers/net/ethernet/marvell/octeon_ep/octep_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 552970c7dec0..b8ae269f6f97 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1258,7 +1258,8 @@ static bool get_fw_ready_status(struct pci_dev *pdev)
 
 		pci_read_config_byte(pdev, (pos + 8), &status);
 		dev_info(&pdev->dev, "Firmware ready status = %u\n", status);
-		return status;
+#define FW_STATUS_READY 1ULL
+		return status == FW_STATUS_READY;
 	}
 	return false;
 }
-- 
2.25.1

Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Thu, 7 Dec 2023 21:56:46 -0800 you wrote:
> The firmware ready value is 1, and get firmware ready status
> function should explicitly test for that value. The firmware
> ready value read will be 2 after driver load, and on unbind
> till firmware rewrites the firmware ready back to 0, the value
> seen by driver will be 2, which should be regarded as not ready.
> 
> Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
> Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
> 
> [...]

Here is the summary with links:
  - [net,v3] octeon_ep: explicitly test for firmware ready value
    https://git.kernel.org/netdev/net/c/284f71762241

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

On Thu, Dec 07, 2023 at 09:56:46PM -0800, Shinas Rasheed wrote:
> The firmware ready value is 1, and get firmware ready status
> function should explicitly test for that value. The firmware
> ready value read will be 2 after driver load, and on unbind
> till firmware rewrites the firmware ready back to 0, the value
> seen by driver will be 2, which should be regarded as not ready.
> 
> Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
> Signed-off-by: Shinas Rasheed <srasheed@marvell.com>

Reviewed-by: Simon Horman <horms@kernel.org>