[PATCH v1 0/7] MPFS clock fixes required for correct CAN clock modeling

Conor Dooley posted 7 patches 2 years ago
Only 0 patches received!
There is a newer version of this series
.../bindings/net/can/microchip,mpfs-can.yaml  |   7 +-
arch/riscv/boot/dts/microchip/mpfs.dtsi       |   4 +-
drivers/clk/microchip/clk-mpfs.c              | 154 ++++++++++--------
.../dt-bindings/clock/microchip,mpfs-clock.h  |   5 +
4 files changed, 99 insertions(+), 71 deletions(-)
[PATCH v1 0/7] MPFS clock fixes required for correct CAN clock modeling
Posted by Conor Dooley 2 years ago
From: Conor Dooley <conor.dooley@microchip.com>

While reviewing a CAN clock driver internally for MPFS [1], I realised
that the modeling of the MSSPLL such that one one of its outputs could
be used was not correct. The CAN controllers on MPFS take 2 input
clocks - one that is the bus clock, acquired from the main MSSPLL and
a second clock for the AHB interface to the result of the SoC.
Currently the binding for the CAN controllers and the represetnation
of the MSSPLL only allows for one of these clocks.
Modify the binding and devicetree to expect two clocks and rework the
main clock controller driver for MPFS such that it is capable of
providing multiple outputs from the MSSPLL.

Cheers,
Conor.

1 - Hopefully that'll show up on the lists soon, once we are happy with
  it ourselves.

CC: Conor Dooley <conor.dooley@microchip.com>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC: Paul Walmsley <paul.walmsley@sifive.com>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Albert Ou <aou@eecs.berkeley.edu>
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-riscv@lists.infradead.org
CC: linux-can@vger.kernel.org
CC: netdev@vger.kernel.org
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-clk@vger.kernel.org

Conor Dooley (7):
  dt-bindings: clock: mpfs: add more MSSPLL output definitions
  dt-bindings: can: mpfs: add missing required clock
  clk: microchip: mpfs: split MSSPLL in two
  clk: microchip: mpfs: setup for using other mss pll outputs
  clk: microchip: mpfs: add missing MSSPLL outputs
  clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  riscv: dts: microchip: add missing CAN bus clocks

 .../bindings/net/can/microchip,mpfs-can.yaml  |   7 +-
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |   4 +-
 drivers/clk/microchip/clk-mpfs.c              | 154 ++++++++++--------
 .../dt-bindings/clock/microchip,mpfs-clock.h  |   5 +
 4 files changed, 99 insertions(+), 71 deletions(-)

-- 
2.39.2
Re: [PATCH v1 0/7] MPFS clock fixes required for correct CAN clock modeling
Posted by Conor Dooley 2 years ago
On Fri, Dec 08, 2023 at 05:07:39PM +0000, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> While reviewing a CAN clock driver internally for MPFS [1], I realised
> that the modeling of the MSSPLL such that one one of its outputs could
> be used was not correct. The CAN controllers on MPFS take 2 input
> clocks - one that is the bus clock, acquired from the main MSSPLL and
> a second clock for the AHB interface to the result of the SoC.
> Currently the binding for the CAN controllers and the represetnation
> of the MSSPLL only allows for one of these clocks.
> Modify the binding and devicetree to expect two clocks and rework the
> main clock controller driver for MPFS such that it is capable of
> providing multiple outputs from the MSSPLL.
> 
> Cheers,
> Conor.

Whoops, that was meant to get a dry run arg... Please ignore!