Added support for interrupt to the LED controller driver, which
indicates the finished of the auto-breath pattern.

Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
 Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
index 54d6d1f08e24..7ab35b7a3fe6 100644
--- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -44,6 +44,9 @@ properties:
   enable-gpios:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 patternProperties:
   "^led@[0-9a-f]+$":
     type: object
@@ -137,6 +140,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -149,6 +153,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
             enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
             led@0 {
                 reg = <0x0>;
-- 
2.40.0

On Thu, Dec 07, 2023 at 03:59:38PM +0300, Martin Kurbanov wrote:
> Added support for interrupt to the LED controller driver, which
> indicates the finished of the auto-breath pattern.
> 
> Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

> ---
>  Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
> index 54d6d1f08e24..7ab35b7a3fe6 100644
> --- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
> +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
> @@ -44,6 +44,9 @@ properties:
>    enable-gpios:
>      maxItems: 1
>  
> +  interrupts:
> +    maxItems: 1
> +
>  patternProperties:
>    "^led@[0-9a-f]+$":
>      type: object
> @@ -137,6 +140,7 @@ additionalProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
>      #include <dt-bindings/leds/common.h>
>  
>      i2c {
> @@ -149,6 +153,8 @@ examples:
>              #address-cells = <1>;
>              #size-cells = <0>;
>              enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
> +            interrupt-parent = <&gpio_intc>;
> +            interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
>  
>              led@0 {
>                  reg = <0x0>;
> -- 
> 2.40.0
>