drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++---------------- 1 file changed, 45 insertions(+), 45 deletions(-)
A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++----------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -95,34 +95,6 @@ config DRM_PANEL_LVDS
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
-config DRM_PANEL_SIMPLE
- tristate "support for simple panels (other than eDP ones)"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- help
- DRM panel driver for dumb non-eDP panels that need at most a regulator
- and a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
-config DRM_PANEL_EDP
- tristate "support for simple Embedded DisplayPort panels"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_DP_AUX_BUS
- select DRM_KMS_HELPER
- help
- DRM panel driver for dumb eDP panels that need at most a regulator and
- a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
config DRM_PANEL_EBBG_FT8719
tristate "EBBG FT8719 panel driver"
depends on OF
@@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
-config DRM_PANEL_SAMSUNG_LD9040
- tristate "Samsung LD9040 RGB/SPI panel"
- depends on OF && SPI
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
with the Magnachip D53E6EA8966 panel IC. This panel receives
video data via DSI but commands via 9-bit SPI using DBI.
+config DRM_PANEL_MANTIX_MLAF057WE51
+ tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Mantix
+ MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+ has a resolution of 720x1440 pixels, a built in backlight and touch
+ controller.
+
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
-config DRM_PANEL_MANTIX_MLAF057WE51
- tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for the Mantix
- MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
- has a resolution of 720x1440 pixels, a built in backlight and touch
- controller.
-
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
@@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430
DB7430 DPI display controller used in such devices as the
LMS397KF04 480x800 DPI panel.
+config DRM_PANEL_SAMSUNG_LD9040
+ tristate "Samsung LD9040 RGB/SPI panel"
+ depends on OF && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
@@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.
+config DRM_PANEL_EDP
+ tristate "support for simple Embedded DisplayPort panels"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_DP_AUX_BUS
+ select DRM_KMS_HELPER
+ help
+ DRM panel driver for dumb eDP panels that need at most a regulator and
+ a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SIMPLE
+ tristate "support for simple panels (other than eDP ones)"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ help
+ DRM panel driver for dumb non-eDP panels that need at most a regulator
+ and a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OFHi Randy, Thanks for the patch! On 07/12/23 11:52, Randy Dunlap wrote: > A few of the DRM_PANEL entries have become out of alphabetical order, > so move them around a bit to restore alpha order. > > Signed-off-by: Randy Dunlap <rdunlap@infradead.org> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Jessica Zhang <quic_jesszhan@quicinc.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thomas Zimmermann <tzimmermann@suse.de> > Cc: David Airlie <airlied@gmail.com> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: dri-devel@lists.freedesktop.org > --- > drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++---------------- > 1 file changed, 45 insertions(+), 45 deletions(-) > > diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -95,34 +95,6 @@ config DRM_PANEL_LVDS > handling of power supplies or control signals. It implements automatic > backlight handling if the panel is attached to a backlight controller. > > -config DRM_PANEL_SIMPLE > - tristate "support for simple panels (other than eDP ones)" > - depends on OF > - depends on BACKLIGHT_CLASS_DEVICE > - depends on PM > - select VIDEOMODE_HELPERS > - help > - DRM panel driver for dumb non-eDP panels that need at most a regulator > - and a GPIO to be powered up. Optionally a backlight can be attached so > - that it can be automatically turned off when the panel goes into a > - low power state. > - > -config DRM_PANEL_EDP > - tristate "support for simple Embedded DisplayPort panels" > - depends on OF > - depends on BACKLIGHT_CLASS_DEVICE > - depends on PM > - select VIDEOMODE_HELPERS > - select DRM_DISPLAY_DP_HELPER > - select DRM_DISPLAY_HELPER > - select DRM_DP_AUX_BUS > - select DRM_KMS_HELPER > - help > - DRM panel driver for dumb eDP panels that need at most a regulator and > - a GPIO to be powered up. Optionally a backlight can be attached so > - that it can be automatically turned off when the panel goes into a > - low power state. > - > config DRM_PANEL_EBBG_FT8719 > tristate "EBBG FT8719 panel driver" > depends on OF > @@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 > 24 bit RGB per pixel. It provides a MIPI DSI interface to > the host and has a built-in LED backlight. > > -config DRM_PANEL_SAMSUNG_LD9040 > - tristate "Samsung LD9040 RGB/SPI panel" > - depends on OF && SPI > - depends on BACKLIGHT_CLASS_DEVICE > - select VIDEOMODE_HELPERS > - > config DRM_PANEL_LG_LB035Q02 > tristate "LG LB035Q024573 RGB panel" > depends on GPIOLIB && OF && SPI > @@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 > with the Magnachip D53E6EA8966 panel IC. This panel receives > video data via DSI but commands via 9-bit SPI using DBI. > > +config DRM_PANEL_MANTIX_MLAF057WE51 > + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for the Mantix > + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It > + has a resolution of 720x1440 pixels, a built in backlight and touch > + controller. > + > config DRM_PANEL_NEC_NL8048HL11 > tristate "NEC NL8048HL11 RGB panel" > depends on GPIOLIB && OF && SPI > @@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016 > Say Y here if you want to enable support for the panels built > around the Novatek NT39016 display controller. > > -config DRM_PANEL_MANTIX_MLAF057WE51 > - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" > - depends on OF > - depends on DRM_MIPI_DSI > - depends on BACKLIGHT_CLASS_DEVICE > - help > - Say Y here if you want to enable support for the Mantix > - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It > - has a resolution of 720x1440 pixels, a built in backlight and touch > - controller. > - > config DRM_PANEL_OLIMEX_LCD_OLINUXINO > tristate "Olimex LCD-OLinuXino panel" > depends on OF > @@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430 > DB7430 DPI display controller used in such devices as the > LMS397KF04 480x800 DPI panel. > > +config DRM_PANEL_SAMSUNG_LD9040 > + tristate "Samsung LD9040 RGB/SPI panel" > + depends on OF && SPI > + depends on BACKLIGHT_CLASS_DEVICE > + select VIDEOMODE_HELPERS > + > config DRM_PANEL_SAMSUNG_S6D16D0 > tristate "Samsung S6D16D0 DSI video mode panel" > depends on OF > @@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015 > with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to > the host, a built-in LED backlight and touch controller. > > +config DRM_PANEL_EDP > + tristate "support for simple Embedded DisplayPort panels" > + depends on OF > + depends on BACKLIGHT_CLASS_DEVICE > + depends on PM > + select VIDEOMODE_HELPERS > + select DRM_DISPLAY_DP_HELPER > + select DRM_DISPLAY_HELPER > + select DRM_DP_AUX_BUS > + select DRM_KMS_HELPER > + help > + DRM panel driver for dumb eDP panels that need at most a regulator and > + a GPIO to be powered up. Optionally a backlight can be attached so > + that it can be automatically turned off when the panel goes into a > + low power state. > + I don't think you intended to put PANEL_EDP this down the file! But just in case if you did, why? Regards Aradhya > +config DRM_PANEL_SIMPLE > + tristate "support for simple panels (other than eDP ones)" > + depends on OF > + depends on BACKLIGHT_CLASS_DEVICE > + depends on PM > + select VIDEOMODE_HELPERS > + help > + DRM panel driver for dumb non-eDP panels that need at most a regulator > + and a GPIO to be powered up. Optionally a backlight can be attached so > + that it can be automatically turned off when the panel goes into a > + low power state. > + > config DRM_PANEL_TDO_TL070WSH30 > tristate "TDO TL070WSH30 DSI panel" > depends on OF
On 12/7/23 01:52, Aradhya Bhatia wrote: > Hi Randy, > > Thanks for the patch! > > On 07/12/23 11:52, Randy Dunlap wrote: >> A few of the DRM_PANEL entries have become out of alphabetical order, >> so move them around a bit to restore alpha order. >> >> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> >> Cc: Neil Armstrong <neil.armstrong@linaro.org> >> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> >> Cc: Sam Ravnborg <sam@ravnborg.org> >> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> >> Cc: Maxime Ripard <mripard@kernel.org> >> Cc: Thomas Zimmermann <tzimmermann@suse.de> >> Cc: David Airlie <airlied@gmail.com> >> Cc: Daniel Vetter <daniel@ffwll.ch> >> Cc: dri-devel@lists.freedesktop.org >> --- >> drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++---------------- >> 1 file changed, 45 insertions(+), 45 deletions(-) >> >> diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -95,34 +95,6 @@ config DRM_PANEL_LVDS >> handling of power supplies or control signals. It implements automatic >> backlight handling if the panel is attached to a backlight controller. >> >> -config DRM_PANEL_SIMPLE >> - tristate "support for simple panels (other than eDP ones)" >> - depends on OF >> - depends on BACKLIGHT_CLASS_DEVICE >> - depends on PM >> - select VIDEOMODE_HELPERS >> - help >> - DRM panel driver for dumb non-eDP panels that need at most a regulator >> - and a GPIO to be powered up. Optionally a backlight can be attached so >> - that it can be automatically turned off when the panel goes into a >> - low power state. >> - >> -config DRM_PANEL_EDP >> - tristate "support for simple Embedded DisplayPort panels" >> - depends on OF >> - depends on BACKLIGHT_CLASS_DEVICE >> - depends on PM >> - select VIDEOMODE_HELPERS >> - select DRM_DISPLAY_DP_HELPER >> - select DRM_DISPLAY_HELPER >> - select DRM_DP_AUX_BUS >> - select DRM_KMS_HELPER >> - help >> - DRM panel driver for dumb eDP panels that need at most a regulator and >> - a GPIO to be powered up. Optionally a backlight can be attached so >> - that it can be automatically turned off when the panel goes into a >> - low power state. >> - >> config DRM_PANEL_EBBG_FT8719 >> tristate "EBBG FT8719 panel driver" >> depends on OF >> @@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 >> 24 bit RGB per pixel. It provides a MIPI DSI interface to >> the host and has a built-in LED backlight. >> >> -config DRM_PANEL_SAMSUNG_LD9040 >> - tristate "Samsung LD9040 RGB/SPI panel" >> - depends on OF && SPI >> - depends on BACKLIGHT_CLASS_DEVICE >> - select VIDEOMODE_HELPERS >> - >> config DRM_PANEL_LG_LB035Q02 >> tristate "LG LB035Q024573 RGB panel" >> depends on GPIOLIB && OF && SPI >> @@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 >> with the Magnachip D53E6EA8966 panel IC. This panel receives >> video data via DSI but commands via 9-bit SPI using DBI. >> >> +config DRM_PANEL_MANTIX_MLAF057WE51 >> + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + help >> + Say Y here if you want to enable support for the Mantix >> + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It >> + has a resolution of 720x1440 pixels, a built in backlight and touch >> + controller. >> + >> config DRM_PANEL_NEC_NL8048HL11 >> tristate "NEC NL8048HL11 RGB panel" >> depends on GPIOLIB && OF && SPI >> @@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016 >> Say Y here if you want to enable support for the panels built >> around the Novatek NT39016 display controller. >> >> -config DRM_PANEL_MANTIX_MLAF057WE51 >> - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" >> - depends on OF >> - depends on DRM_MIPI_DSI >> - depends on BACKLIGHT_CLASS_DEVICE >> - help >> - Say Y here if you want to enable support for the Mantix >> - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It >> - has a resolution of 720x1440 pixels, a built in backlight and touch >> - controller. >> - >> config DRM_PANEL_OLIMEX_LCD_OLINUXINO >> tristate "Olimex LCD-OLinuXino panel" >> depends on OF >> @@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430 >> DB7430 DPI display controller used in such devices as the >> LMS397KF04 480x800 DPI panel. >> >> +config DRM_PANEL_SAMSUNG_LD9040 >> + tristate "Samsung LD9040 RGB/SPI panel" >> + depends on OF && SPI >> + depends on BACKLIGHT_CLASS_DEVICE >> + select VIDEOMODE_HELPERS >> + >> config DRM_PANEL_SAMSUNG_S6D16D0 >> tristate "Samsung S6D16D0 DSI video mode panel" >> depends on OF >> @@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015 >> with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to >> the host, a built-in LED backlight and touch controller. >> >> +config DRM_PANEL_EDP >> + tristate "support for simple Embedded DisplayPort panels" >> + depends on OF >> + depends on BACKLIGHT_CLASS_DEVICE >> + depends on PM >> + select VIDEOMODE_HELPERS >> + select DRM_DISPLAY_DP_HELPER >> + select DRM_DISPLAY_HELPER >> + select DRM_DP_AUX_BUS >> + select DRM_KMS_HELPER >> + help >> + DRM panel driver for dumb eDP panels that need at most a regulator and >> + a GPIO to be powered up. Optionally a backlight can be attached so >> + that it can be automatically turned off when the panel goes into a >> + low power state. >> + > > I don't think you intended to put PANEL_EDP this down the file! But just > in case if you did, why? I was alphabetizing on "support for simple" on the entry above and the one below. Even without "support for", they would read as "Simple ... panels". > Regards > Aradhya > >> +config DRM_PANEL_SIMPLE >> + tristate "support for simple panels (other than eDP ones)" >> + depends on OF >> + depends on BACKLIGHT_CLASS_DEVICE >> + depends on PM >> + select VIDEOMODE_HELPERS >> + help >> + DRM panel driver for dumb non-eDP panels that need at most a regulator >> + and a GPIO to be powered up. Optionally a backlight can be attached so >> + that it can be automatically turned off when the panel goes into a >> + low power state. >> + >> config DRM_PANEL_TDO_TL070WSH30 >> tristate "TDO TL070WSH30 DSI panel" >> depends on OF -- ~Randy
On 07/12/23 22:28, Randy Dunlap wrote: > > > On 12/7/23 01:52, Aradhya Bhatia wrote: >> Hi Randy, >> >> Thanks for the patch! >> >> On 07/12/23 11:52, Randy Dunlap wrote: >>> A few of the DRM_PANEL entries have become out of alphabetical order, >>> so move them around a bit to restore alpha order. >>> >>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> >>> Cc: Neil Armstrong <neil.armstrong@linaro.org> >>> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> >>> Cc: Sam Ravnborg <sam@ravnborg.org> >>> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> >>> Cc: Maxime Ripard <mripard@kernel.org> >>> Cc: Thomas Zimmermann <tzimmermann@suse.de> >>> Cc: David Airlie <airlied@gmail.com> >>> Cc: Daniel Vetter <daniel@ffwll.ch> >>> Cc: dri-devel@lists.freedesktop.org >>> --- >>> drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++---------------- >>> 1 file changed, 45 insertions(+), 45 deletions(-) >>> >>> diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >>> --- a/drivers/gpu/drm/panel/Kconfig >>> +++ b/drivers/gpu/drm/panel/Kconfig >>> @@ -95,34 +95,6 @@ config DRM_PANEL_LVDS >>> handling of power supplies or control signals. It implements automatic >>> backlight handling if the panel is attached to a backlight controller. >>> >>> -config DRM_PANEL_SIMPLE >>> - tristate "support for simple panels (other than eDP ones)" >>> - depends on OF >>> - depends on BACKLIGHT_CLASS_DEVICE >>> - depends on PM >>> - select VIDEOMODE_HELPERS >>> - help >>> - DRM panel driver for dumb non-eDP panels that need at most a regulator >>> - and a GPIO to be powered up. Optionally a backlight can be attached so >>> - that it can be automatically turned off when the panel goes into a >>> - low power state. >>> - >>> -config DRM_PANEL_EDP >>> - tristate "support for simple Embedded DisplayPort panels" >>> - depends on OF >>> - depends on BACKLIGHT_CLASS_DEVICE >>> - depends on PM >>> - select VIDEOMODE_HELPERS >>> - select DRM_DISPLAY_DP_HELPER >>> - select DRM_DISPLAY_HELPER >>> - select DRM_DP_AUX_BUS >>> - select DRM_KMS_HELPER >>> - help >>> - DRM panel driver for dumb eDP panels that need at most a regulator and >>> - a GPIO to be powered up. Optionally a backlight can be attached so >>> - that it can be automatically turned off when the panel goes into a >>> - low power state. >>> - >>> config DRM_PANEL_EBBG_FT8719 >>> tristate "EBBG FT8719 panel driver" >>> depends on OF >>> @@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 >>> 24 bit RGB per pixel. It provides a MIPI DSI interface to >>> the host and has a built-in LED backlight. >>> >>> -config DRM_PANEL_SAMSUNG_LD9040 >>> - tristate "Samsung LD9040 RGB/SPI panel" >>> - depends on OF && SPI >>> - depends on BACKLIGHT_CLASS_DEVICE >>> - select VIDEOMODE_HELPERS >>> - >>> config DRM_PANEL_LG_LB035Q02 >>> tristate "LG LB035Q024573 RGB panel" >>> depends on GPIOLIB && OF && SPI >>> @@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 >>> with the Magnachip D53E6EA8966 panel IC. This panel receives >>> video data via DSI but commands via 9-bit SPI using DBI. >>> >>> +config DRM_PANEL_MANTIX_MLAF057WE51 >>> + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" >>> + depends on OF >>> + depends on DRM_MIPI_DSI >>> + depends on BACKLIGHT_CLASS_DEVICE >>> + help >>> + Say Y here if you want to enable support for the Mantix >>> + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It >>> + has a resolution of 720x1440 pixels, a built in backlight and touch >>> + controller. >>> + >>> config DRM_PANEL_NEC_NL8048HL11 >>> tristate "NEC NL8048HL11 RGB panel" >>> depends on GPIOLIB && OF && SPI >>> @@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016 >>> Say Y here if you want to enable support for the panels built >>> around the Novatek NT39016 display controller. >>> >>> -config DRM_PANEL_MANTIX_MLAF057WE51 >>> - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" >>> - depends on OF >>> - depends on DRM_MIPI_DSI >>> - depends on BACKLIGHT_CLASS_DEVICE >>> - help >>> - Say Y here if you want to enable support for the Mantix >>> - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It >>> - has a resolution of 720x1440 pixels, a built in backlight and touch >>> - controller. >>> - >>> config DRM_PANEL_OLIMEX_LCD_OLINUXINO >>> tristate "Olimex LCD-OLinuXino panel" >>> depends on OF >>> @@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430 >>> DB7430 DPI display controller used in such devices as the >>> LMS397KF04 480x800 DPI panel. >>> >>> +config DRM_PANEL_SAMSUNG_LD9040 >>> + tristate "Samsung LD9040 RGB/SPI panel" >>> + depends on OF && SPI >>> + depends on BACKLIGHT_CLASS_DEVICE >>> + select VIDEOMODE_HELPERS >>> + >>> config DRM_PANEL_SAMSUNG_S6D16D0 >>> tristate "Samsung S6D16D0 DSI video mode panel" >>> depends on OF >>> @@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015 >>> with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to >>> the host, a built-in LED backlight and touch controller. >>> >>> +config DRM_PANEL_EDP >>> + tristate "support for simple Embedded DisplayPort panels" >>> + depends on OF >>> + depends on BACKLIGHT_CLASS_DEVICE >>> + depends on PM >>> + select VIDEOMODE_HELPERS >>> + select DRM_DISPLAY_DP_HELPER >>> + select DRM_DISPLAY_HELPER >>> + select DRM_DP_AUX_BUS >>> + select DRM_KMS_HELPER >>> + help >>> + DRM panel driver for dumb eDP panels that need at most a regulator and >>> + a GPIO to be powered up. Optionally a backlight can be attached so >>> + that it can be automatically turned off when the panel goes into a >>> + low power state. >>> + >> >> I don't think you intended to put PANEL_EDP this down the file! But just >> in case if you did, why? > > I was alphabetizing on "support for simple" on the entry above and the > one below. Even without "support for", they would read as > "Simple ... panels". That's fair. I suppose anybody seeing the menuconfig would see the mini description. Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> > >> Regards >> Aradhya >> >>> +config DRM_PANEL_SIMPLE >>> + tristate "support for simple panels (other than eDP ones)" >>> + depends on OF >>> + depends on BACKLIGHT_CLASS_DEVICE >>> + depends on PM >>> + select VIDEOMODE_HELPERS >>> + help >>> + DRM panel driver for dumb non-eDP panels that need at most a regulator >>> + and a GPIO to be powered up. Optionally a backlight can be attached so >>> + that it can be automatically turned off when the panel goes into a >>> + low power state. >>> + >>> config DRM_PANEL_TDO_TL070WSH30 >>> tristate "TDO TL070WSH30 DSI panel" >>> depends on OF >
© 2016 - 2025 Red Hat, Inc.