In order to start moving the serial console quirks out of console_setup(),
let's add parsing for the quirks to the serial core layer. We can use
add_preferred_console_match() to handle the quirks.

At this point we can't drop the quirks from console_setup() because it
would confuse add_preferred_console(). And try_enable_default_console()
would get called before try_enable_preferred_console().

Note that eventually we may want to set up driver specific console quirk
handling for the serial port device drivers to use. But we need to figure
out which driver(s) need to call the quirk. So for now, we just handle the
sparc quirk directly.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/tty/serial/serial_base_bus.c | 67 ++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c
--- a/drivers/tty/serial/serial_base_bus.c
+++ b/drivers/tty/serial/serial_base_bus.c
@@ -207,6 +207,43 @@ void serial_base_port_device_remove(struct serial_port_device *port_dev)
 
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 
+#ifdef __sparc__
+
+/* Handle Sparc ttya and ttyb options as done in console_setup() */
+static int serial_base_add_sparc_console(struct uart_driver *drv,
+					 struct uart_port *port)
+{
+	const char *name = NULL;
+	int ret;
+
+	switch (port->line) {
+	case 0:
+		name = "ttya";
+		break;
+	case 1:
+		name = "ttyb";
+		break;
+	default:
+		return 0;
+	}
+
+	ret = add_preferred_console_match(name, drv->dev_name, port->line);
+	if (ret && ret != -ENOENT)
+		return ret;
+
+	return 0;
+}
+
+#else
+
+static inline int serial_base_add_sparc_console(struct uart_driver *drv,
+						struct uart_port *port)
+{
+	return 0;
+}
+
+#endif
+
 static int serial_base_add_one_prefcon(const char *match, const char *dev_name,
 				       int port_id)
 {
@@ -240,12 +277,42 @@ int serial_base_add_preferred_console(struct uart_driver *drv,
 				      struct uart_port *port)
 {
 	const char *port_match __free(kfree);
+	const char *char_match __free(kfree) = NULL;
+	const char *nmbr_match __free(kfree) = NULL;
+	int ret;
 
 	port_match = kasprintf(GFP_KERNEL, "%s:%i.%i", dev_name(port->dev),
 			       port->ctrl_id, port->port_id);
 	if (!port_match)
 		return -ENOMEM;
 
+	char_match = kasprintf(GFP_KERNEL, "%s%i", drv->dev_name, port->line);
+	if (!char_match)
+		return -ENOMEM;
+
+	/* Handle ttyS specific options */
+	if (!strncmp(drv->dev_name, "ttyS", 4)) {
+		/* No name, just a number */
+		nmbr_match = kasprintf(GFP_KERNEL, "%i", port->line);
+		if (!nmbr_match)
+			return -ENODEV;
+
+		ret = serial_base_add_one_prefcon(nmbr_match, drv->dev_name,
+						  port->line);
+		if (ret)
+			return ret;
+
+		/* Sparc ttya and ttyb */
+		ret = serial_base_add_sparc_console(drv, port);
+		if (ret)
+			return ret;
+	}
+
+	/* Handle the traditional character device name style console=ttyS0 */
+	ret = serial_base_add_one_prefcon(char_match, drv->dev_name, port->line);
+	if (ret)
+		return ret;
+
 	/* Translate a hardware addressing style console=DEVNAME:0.0 */
 	return serial_base_add_one_prefcon(port_match, drv->dev_name, port->line);
 }
-- 
2.43.0

On Tue, Dec 05, 2023 at 09:32:35AM +0200, Tony Lindgren wrote:
> In order to start moving the serial console quirks out of console_setup(),
> let's add parsing for the quirks to the serial core layer. We can use
> add_preferred_console_match() to handle the quirks.
> 
> At this point we can't drop the quirks from console_setup() because it
> would confuse add_preferred_console(). And try_enable_default_console()
> would get called before try_enable_preferred_console().
> 
> Note that eventually we may want to set up driver specific console quirk
> handling for the serial port device drivers to use. But we need to figure
> out which driver(s) need to call the quirk. So for now, we just handle the
> sparc quirk directly.

...

> +static int serial_base_add_sparc_console(struct uart_driver *drv,
> +					 struct uart_port *port)
> +{
> +	const char *name = NULL;
> +	int ret;
> +
> +	switch (port->line) {
> +	case 0:
> +		name = "ttya";
> +		break;
> +	case 1:
> +		name = "ttyb";
> +		break;
> +	default:
> +		return 0;
> +	}

> +	ret = add_preferred_console_match(name, drv->dev_name, port->line);
> +	if (ret && ret != -ENOENT)
> +		return ret;
> +
> +	return 0;

	return serial_base_add_one_prefcon(...);

?

> +}

...

> +	if (!strncmp(drv->dev_name, "ttyS", 4)) {

str_has_prefix()

> +	}

-- 
With Best Regards,
Andy Shevchenko