From: Heiko Stuebner <heiko.stuebner@cherry.de>

While the external clock input will most likely be enabled, it's not
guaranteed and clk_get_rate in some suppliers will even just return
valid results when the clock is running.

So use devm_clk_get_optional_enabled to retrieve and enable the clock
in one go.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 drivers/net/phy/micrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 08e3915001c3..ec6a39dc9053 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -2001,7 +2001,7 @@ static int kszphy_probe(struct phy_device *phydev)
 
 	kszphy_parse_led_mode(phydev);
 
-	clk = devm_clk_get(&phydev->mdio.dev, "rmii-ref");
+	clk = devm_clk_get_optional_enabled(&phydev->mdio.dev, "rmii-ref");
 	/* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
 	if (!IS_ERR_OR_NULL(clk)) {
 		unsigned long rate = clk_get_rate(clk);
-- 
2.39.2

On Fri, Dec 01, 2023 at 04:01:30PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@cherry.de>
> 
> While the external clock input will most likely be enabled, it's not
> guaranteed and clk_get_rate in some suppliers will even just return
> valid results when the clock is running.
> 
> So use devm_clk_get_optional_enabled to retrieve and enable the clock
> in one go.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

On 12/1/23 07:01, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@cherry.de>
> 
> While the external clock input will most likely be enabled, it's not
> guaranteed and clk_get_rate in some suppliers will even just return
> valid results when the clock is running.
> 
> So use devm_clk_get_optional_enabled to retrieve and enable the clock
> in one go.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian