The panel_flag property was used in ChromeOS's downstream kernel. It was
used to signal whether the downstream device was a fixed panel or
a connector for an external display.

This property was dropped in favor of standard OF graph descrptions of
downstream display panels and bridges.

Drop the property from the device tree file.

Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index bf97b60ae4d1..09e658bc30e6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -147,7 +147,6 @@ anx_bridge: anx7625@58 {
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
 		vdd10-supply = <&pp1200_mipibrdg>;
-- 
2.43.0.rc2.451.g8631bc7472-goog

Il 30/11/23 08:40, Chen-Yu Tsai ha scritto:
> The panel_flag property was used in ChromeOS's downstream kernel. It was
> used to signal whether the downstream device was a fixed panel or
> a connector for an external display.
> 
> This property was dropped in favor of standard OF graph descrptions of
> downstream display panels and bridges.
> 
> Drop the property from the device tree file.
> 
> Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>