The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/clk/qcom/Kconfig           |   8 +
 drivers/clk/qcom/Makefile          |   1 +
 drivers/clk/qcom/tcsrcc-x1e80100.c | 295 +++++++++++++++++++++++++++++++++++++
 3 files changed, 304 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ad1acd9b7426..6ed9c89d9070 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
 	  SM8450 devices.
 	  Say Y if you want to support video devices and functionality such as
 	  video encode/decode.
+
+config X1E_TCSRCC_80100
+	tristate "X1E80100 TCSR Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select QCOM_GDSC
+	help
+	  Support for the TCSR clock controller on X1E80100 devices.
+	  Say Y if you want to use peripheral devices such as SD/UFS.
 endif
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 17edd73f9839..4931a1470137 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -140,3 +140,4 @@ obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
 obj-$(CONFIG_KRAITCC) += krait-cc.o
+obj-$(CONFIG_X1E_TCSRCC_80100) += tcsrcc-x1e80100.o
diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
new file mode 100644
index 000000000000..2ec142c3d1f9
--- /dev/null
+++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "reset.h"
+
+enum {
+	DT_BI_TCXO_PAD,
+};
+
+static struct clk_branch tcsr_edp_clkref_en = {
+	.halt_reg = 0x15130,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15130,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "tcsr_edp_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
+	.halt_reg = 0x15100,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15100,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_pcie_2l_4_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_pcie_2l_5_clkref_en = {
+	.halt_reg = 0x15104,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15104,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_pcie_2l_5_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_pcie_8l_clkref_en = {
+	.halt_reg = 0x15108,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15108,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_pcie_8l_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb3_mp0_clkref_en = {
+	.halt_reg = 0x1510c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1510c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb3_mp0_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb3_mp1_clkref_en = {
+	.halt_reg = 0x15110,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15110,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb3_mp1_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb2_1_clkref_en = {
+	.halt_reg = 0x15114,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15114,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb2_1_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_ufs_phy_clkref_en = {
+	.halt_reg = 0x15118,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15118,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_ufs_phy_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb4_1_clkref_en = {
+	.halt_reg = 0x15120,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15120,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb4_1_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb4_2_clkref_en = {
+	.halt_reg = 0x15124,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15124,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb4_2_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb2_2_clkref_en = {
+	.halt_reg = 0x15128,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15128,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_usb2_2_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_pcie_4l_clkref_en = {
+	.halt_reg = 0x1512c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1512c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "tcsr_pcie_4l_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_regmap *tcsr_cc_x1e80100_clocks[] = {
+	[TCSR_EDP_CLKREF_EN] = &tcsr_edp_clkref_en.clkr,
+	[TCSR_PCIE_2L_4_CLKREF_EN] = &tcsr_pcie_2l_4_clkref_en.clkr,
+	[TCSR_PCIE_2L_5_CLKREF_EN] = &tcsr_pcie_2l_5_clkref_en.clkr,
+	[TCSR_PCIE_8L_CLKREF_EN] = &tcsr_pcie_8l_clkref_en.clkr,
+	[TCSR_USB3_MP0_CLKREF_EN] = &tcsr_usb3_mp0_clkref_en.clkr,
+	[TCSR_USB3_MP1_CLKREF_EN] = &tcsr_usb3_mp1_clkref_en.clkr,
+	[TCSR_USB2_1_CLKREF_EN] = &tcsr_usb2_1_clkref_en.clkr,
+	[TCSR_UFS_PHY_CLKREF_EN] = &tcsr_ufs_phy_clkref_en.clkr,
+	[TCSR_USB4_1_CLKREF_EN] = &tcsr_usb4_1_clkref_en.clkr,
+	[TCSR_USB4_2_CLKREF_EN] = &tcsr_usb4_2_clkref_en.clkr,
+	[TCSR_USB2_2_CLKREF_EN] = &tcsr_usb2_2_clkref_en.clkr,
+	[TCSR_PCIE_4L_CLKREF_EN] = &tcsr_pcie_4l_clkref_en.clkr,
+};
+
+static const struct regmap_config tcsr_cc_x1e80100_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x2f000,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc tcsr_cc_x1e80100_desc = {
+	.config = &tcsr_cc_x1e80100_regmap_config,
+	.clks = tcsr_cc_x1e80100_clocks,
+	.num_clks = ARRAY_SIZE(tcsr_cc_x1e80100_clocks),
+};
+
+static const struct of_device_id tcsr_cc_x1e80100_match_table[] = {
+	{ .compatible = "qcom,x1e80100-tcsr" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tcsr_cc_x1e80100_match_table);
+
+static int tcsr_cc_x1e80100_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &tcsr_cc_x1e80100_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return qcom_cc_really_probe(pdev, &tcsr_cc_x1e80100_desc, regmap);
+}
+
+static struct platform_driver tcsr_cc_x1e80100_driver = {
+	.probe = tcsr_cc_x1e80100_probe,
+	.driver = {
+		.name = "tcsr_cc-x1e80100",
+		.of_match_table = tcsr_cc_x1e80100_match_table,
+	},
+};
+
+static int __init tcsr_cc_x1e80100_init(void)
+{
+	return platform_driver_register(&tcsr_cc_x1e80100_driver);
+}
+subsys_initcall(tcsr_cc_x1e80100_init);
+
+static void __exit tcsr_cc_x1e80100_exit(void)
+{
+	platform_driver_unregister(&tcsr_cc_x1e80100_driver);
+}
+module_exit(tcsr_cc_x1e80100_exit);
+
+MODULE_DESCRIPTION("QTI TCSRCC X1E80100 Driver");
+MODULE_LICENSE("GPL");

-- 
2.34.1

On Wed, Nov 22, 2023 at 7:42 AM Abel Vesa <abel.vesa@linaro.org> wrote:
>
> The TCSR clock controller found on X1E80100 provides refclks
> for PCIE, USB and UFS. Add clock driver for it.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/clk/qcom/Kconfig           |   8 +
>  drivers/clk/qcom/Makefile          |   1 +
>  drivers/clk/qcom/tcsrcc-x1e80100.c | 295 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 304 insertions(+)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index ad1acd9b7426..6ed9c89d9070 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
>           SM8450 devices.
>           Say Y if you want to support video devices and functionality such as
>           video encode/decode.
> +
> +config X1E_TCSRCC_80100
> +       tristate "X1E80100 TCSR Clock Controller"
> +       depends on ARM64 || COMPILE_TEST
> +       select QCOM_GDSC
> +       help
> +         Support for the TCSR clock controller on X1E80100 devices.
> +         Say Y if you want to use peripheral devices such as SD/UFS.
>  endif
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 17edd73f9839..4931a1470137 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -140,3 +140,4 @@ obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
>  obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
>  obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
>  obj-$(CONFIG_KRAITCC) += krait-cc.o
> +obj-$(CONFIG_X1E_TCSRCC_80100) += tcsrcc-x1e80100.o
> diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
> new file mode 100644
> index 000000000000..2ec142c3d1f9
> --- /dev/null
> +++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>

You probably don't need this header and the implicit includes it makes
are dropped now in linux-next. Please check what you actually need and
make them explicit.

Rob

Quoting Abel Vesa (2023-11-22 05:42:13)
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index ad1acd9b7426..6ed9c89d9070 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
>           SM8450 devices.
>           Say Y if you want to support video devices and functionality such as
>           video encode/decode.
> +
> +config X1E_TCSRCC_80100

Is the config symbol intentionally namespaced for X1E prefix to group
one SoC? Why not X1E80100_TCSRCC then?

> +       tristate "X1E80100 TCSR Clock Controller"
> +       depends on ARM64 || COMPILE_TEST
> +       select QCOM_GDSC
> +       help
> +         Support for the TCSR clock controller on X1E80100 devices.
> +         Say Y if you want to use peripheral devices such as SD/UFS.
>  endif
> diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
> new file mode 100644
> index 000000000000..2ec142c3d1f9
> --- /dev/null
> +++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "clk-regmap-divider.h"
> +#include "clk-regmap-mux.h"
> +#include "common.h"
> +#include "reset.h"
> +
> +enum {
> +       DT_BI_TCXO_PAD,
> +};
> +
> +static struct clk_branch tcsr_edp_clkref_en = {
> +       .halt_reg = 0x15130,
> +       .halt_check = BRANCH_HALT_DELAY,
> +       .clkr = {
> +               .enable_reg = 0x15130,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(const struct clk_init_data) {
> +                       .name = "tcsr_edp_clkref_en",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
> +       .halt_reg = 0x15100,
> +       .halt_check = BRANCH_HALT_DELAY,

Why are these all branch halt delay but still have a halt_reg?

> +       .clkr = {
> +               .enable_reg = 0x15100,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){

const?

> +                       .name = "tcsr_pcie_2l_4_clkref_en",
> +                       .parent_data = &(const struct clk_parent_data){
> +                               .index = DT_BI_TCXO_PAD,
> +                       },

On 11/22/23 14:42, Abel Vesa wrote:
> The TCSR clock controller found on X1E80100 provides refclks
> for PCIE, USB and UFS. Add clock driver for it.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
[...]


> +static int tcsr_cc_x1e80100_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = qcom_cc_map(pdev, &tcsr_cc_x1e80100_desc);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return qcom_cc_really_probe(pdev, &tcsr_cc_x1e80100_desc, regmap);
> +}
qcom_cc_probe

other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad