The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8b968062a2c4..5ca77acd2a46 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3426,8 +3426,8 @@ usb_2: usb@8cf8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
-- 
2.41.0