Hello!

This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.

I have done a simple ping test to confirm basic communication on all switch
ports on the MCM and standalone MT7530 and MT7531 switch with this patch
series applied.

MT7621 Unielec, MCM MT7530:

rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb

tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000

MT7622 Bananapi, MT7531:

gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb

tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000

MT7623 Bananapi, standalone MT7530:

rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb

tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000

This patch series is the continuation of the one linked below.

https://lore.kernel.org/netdev/20230522121532.86610-1-arinc.unal@arinc9.com/

Arınç

Arınç ÜNAL (15):
  net: dsa: mt7530: always trap frames to active CPU port on MT7530
  net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
  net: dsa: mt7530: store port 5 SGMII capability of MT7531
  net: dsa: mt7530: improve comments regarding port 5 and 6
  net: dsa: mt7530: improve code path for setting up port 5
  net: dsa: mt7530: do not set priv->p5_interface on mt7530_setup_port5()
  net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
  net: dsa: mt7530: empty default case on mt7530_setup_port5()
  net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
  net: dsa: mt7530: remove pad_setup function pointer
  net: dsa: mt7530: move XTAL check to mt7530_setup()
  net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()
  net: dsa: mt7530: simplify mt7530_setup_port6() and change to void
  net: dsa: mt7530: correct port capabilities of MT7988
  net: dsa: mt7530: do not clear config->supported_interfaces

 drivers/net/dsa/mt7530-mdio.c |   7 +-
 drivers/net/dsa/mt7530.c      | 283 ++++++++++++++++---------------------
 drivers/net/dsa/mt7530.h      |  19 +--
 3 files changed, 137 insertions(+), 172 deletions(-)

Can I receive reviews for patches 6, 12, 13, 14, and 15?

Thanks.
Arınç

Hi Arınç,

On Sat, Dec 02, 2023 at 11:52:13AM +0300, Arınç ÜNAL wrote:
> Can I receive reviews for patches 6, 12, 13, 14, and 15?
> 
> Thanks.
> Arınç

Sorry, I don't have time to look at this old thread anymore.

Please repost the series with the feedback you got so far addressed.
Also, you can try to split into smaller, more cohesive groups of
patches, that have higher chances of getting merged.

On 13.12.2023 18:19, Vladimir Oltean wrote:
> Hi Arınç,
> 
> On Sat, Dec 02, 2023 at 11:52:13AM +0300, Arınç ÜNAL wrote:
>> Can I receive reviews for patches 6, 12, 13, 14, and 15?
>>
>> Thanks.
>> Arınç
> 
> Sorry, I don't have time to look at this old thread anymore.
> 
> Please repost the series with the feedback you got so far addressed.
> Also, you can try to split into smaller, more cohesive groups of
> patches, that have higher chances of getting merged.

Thanks Vladimir. I've been fighting a bad fever with sore throat. I'll
submit the first 7 patches after working on your reviews.

Thanks a lot for your attention to my patches that's been going on for more
than half a year now.

Arınç